table of contents
| FENCE_AGENT(8) | System Manager's Manual | FENCE_AGENT(8) |
NAME¶
fence_ilo2 - Fence agent for HP iLO
fence_ilo2 - Fence agent for HP iLO2 (symlink)
DESCRIPTION¶
fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream.
fence_ilo2 accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo2 can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.hp.com
PARAMETERS¶
- -o, --action=[action]
- Fencing Action (Default Value: reboot)
- -4, --inet4-only
- Forces agent to use IPv4 addresses only
- -6, --inet6-only
- Forces agent to use IPv6 addresses only
- -a, --ip=[ip]
- IP Address or Hostname This parameter is always required.
- -u, --ipport=[port]
- TCP/UDP port to use for connection with device (Default Value: 443)
- -l, --username=[name]
- Login Name This parameter is always required.
- -t, --notls
- Disable TLS negotiation, force SSL 3.0 (Default Value: 1)
- -p, --password=[password]
- Login password or passphrase
- -S, --password-script=[script]
- Script to retrieve password
- -r, --ribcl-version=[version]
- Force ribcl version to use
- -z, --ssl
- SSL connection (Default Value: 1)
- --ssl-insecure
- SSL connection without verifying fence device's certificate
- --ssl-secure
- SSL connection with verifying fence device's certificate
- --tls1.0
- Disable TLS negotiaton, force TLS 1.0
- -v, --verbose
- Verbose mode
- -D, --debug-file=[debugfile]
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- --delay=[seconds]
- Wait X seconds before fencing is started (Default Value: 0)
- --login-timeout=[seconds]
- Wait X seconds for cmd prompt after login (Default Value: 10)
- --power-timeout=[seconds]
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- --shell-timeout=[seconds]
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --retry-on=[attempts]
- Count of attempts to retry power on (Default Value: 3)
- --gnutlscli-path=[path]
- Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
ACTIONS¶
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- list
- List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
- list-status
- List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.
- monitor
- Check the health of fence device
- metadata
- Display the XML metadata describing this resource.
STDIN PARAMETERS¶
- action
- Fencing Action (Default Value: reboot)
- inet4_only
- Forces agent to use IPv4 addresses only
- inet6_only
- Forces agent to use IPv6 addresses only
- ipaddr
- IP Address or Hostname This parameter is always required.
- ipport
- TCP/UDP port to use for connection with device (Default Value: 443)
- login
- Login Name This parameter is always required.
- notls
- Disable TLS negotiation, force SSL 3.0 (Default Value: 1)
- passwd
- Login password or passphrase
- passwd_script
- Script to retrieve password
- ribcl
- Force ribcl version to use
- ssl
- SSL connection (Default Value: 1)
- ssl_insecure
- SSL connection without verifying fence device's certificate
- ssl_secure
- SSL connection with verifying fence device's certificate
- tls1.0
- Disable TLS negotiaton, force TLS 1.0
- verbose
- Verbose mode
- debug
- Write debug information to given file
- version
- Display version information and exit
- help
- Display help and exit
- delay
- Wait X seconds before fencing is started (Default Value: 0)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 10)
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- retry_on
- Count of attempts to retry power on (Default Value: 3)
- gnutlscli_path
- Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
| 2009-10-20 | fence_ilo2 (Fence Agent) |