table of contents
| FENCE_AGENT(8) | System Manager's Manual | FENCE_AGENT(8) |
NAME¶
fence_ilo4_ssh - Fence agent for HP iLO over SSH
fence_ilo3_ssh - Fence agent for HP iLO3 over SSH (symlink)
fence_ilo4_ssh - Fence agent for HP iLO4 over SSH (symlink)
DESCRIPTION¶
fence_ilo_ssh is a fence agent that connects to iLO device. It logs into device via ssh and reboot a specified outlet.
fence_ilo4_ssh accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo4_ssh can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.hp.com
PARAMETERS¶
- -o, --action=[action]
- Fencing Action (Default Value: reboot)
- -c, --command-prompt=[prompt]
- Force Python regex for command prompt (Default Value: ['MP>', 'hpiLO->'])
- -k, --identity-file=[filename]
- Identity file for ssh
- -4, --inet4-only
- Forces agent to use IPv4 addresses only
- -6, --inet6-only
- Forces agent to use IPv6 addresses only
- -a, --ip=[ip]
- IP Address or Hostname This parameter is always required.
- -u, --ipport=[port]
- TCP/UDP port to use for connection with device (Default Value: 23)
- -l, --username=[name]
- Login Name This parameter is always required.
- -m, --method=[method]
- Method to fence (onoff|cycle) (Default Value: onoff)
- -p, --password=[password]
- Login password or passphrase
- -S, --password-script=[script]
- Script to retrieve password
- -x, --ssh
- SSH connection
- --ssh-options=[options]
- SSH options to use
- -v, --verbose
- Verbose mode
- -D, --debug-file=[debugfile]
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- --delay=[seconds]
- Wait X seconds before fencing is started (Default Value: 0)
- --login-timeout=[seconds]
- Wait X seconds for cmd prompt after login (Default Value: 5)
- --power-timeout=[seconds]
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
- Wait X seconds after issuing ON/OFF (Default Value: 5)
- --shell-timeout=[seconds]
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --retry-on=[attempts]
- Count of attempts to retry power on (Default Value: 1)
- --ssh-path=[path]
- Path to ssh binary (Default Value: /usr/bin/ssh)
- --telnet-path=[path]
- Path to telnet binary (Default Value: /usr/bin/telnet)
ACTIONS¶
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- list
- List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
- list-status
- List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.
- monitor
- Check the health of fence device
- metadata
- Display the XML metadata describing this resource.
STDIN PARAMETERS¶
- action
- Fencing Action (Default Value: reboot)
- cmd_prompt
- Force Python regex for command prompt (Default Value: ['MP>', 'hpiLO->'])
- identity_file
- Identity file for ssh
- inet4_only
- Forces agent to use IPv4 addresses only
- inet6_only
- Forces agent to use IPv6 addresses only
- ipaddr
- IP Address or Hostname This parameter is always required.
- ipport
- TCP/UDP port to use for connection with device (Default Value: 23)
- login
- Login Name This parameter is always required.
- method
- Method to fence (onoff|cycle) (Default Value: onoff)
- passwd
- Login password or passphrase
- passwd_script
- Script to retrieve password
- secure
- SSH connection
- ssh_options
- SSH options to use
- verbose
- Verbose mode
- debug
- Write debug information to given file
- version
- Display version information and exit
- help
- Display help and exit
- delay
- Wait X seconds before fencing is started (Default Value: 0)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 5)
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 5)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- retry_on
- Count of attempts to retry power on (Default Value: 1)
- ssh_path
- Path to ssh binary (Default Value: /usr/bin/ssh)
- telnet_path
- Path to telnet binary (Default Value: /usr/bin/telnet)
| 2009-10-20 | fence_ilo4_ssh (Fence Agent) |