Scroll to navigation

FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)

NAME

fence_imm - Fence agent for IPMI

fence_ilo3 - Fence agent for HP iLO3 (symlink)

fence_ilo4 - Fence agent for HP iLO4 (symlink)

fence_imm - Fence agent for IBM Integrated Management Module (symlink)

fence_idrac - Fence agent for Dell iDRAC (symlink)

DESCRIPTION

fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/).

fence_imm accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_imm can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL:

PARAMETERS

Fencing Action (Default Value: reboot)
IPMI Lan Auth type.
Ciphersuite to use (same as ipmitool -C parameter)
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
IP Address or Hostname This parameter is always required.
TCP/UDP port to use for connection with device (Default Value: 623)
Use Lanplus to improve security of connection (Default Value: 0)
Login Name
Method to fence (onoff|cycle) (Default Value: onoff)
Login password or passphrase
Script to retrieve password
Privilege level on IPMI device (Default Value: administrator)
Timeout (sec) for IPMI operation
Verbose mode
Write debug information to given file
Display version information and exit
Display help and exit
Wait X seconds before fencing is started (Default Value: 0)
Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
Wait X seconds for cmd prompt after login (Default Value: 5)
Test X seconds for status change after ON/OFF (Default Value: 20)
Wait X seconds after issuing ON/OFF (Default Value: 2)
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
Count of attempts to retry power on (Default Value: 1)
Use sudo (without password) when calling 3rd party sotfware.
Path to sudo binary (Default Value: /usr/bin/sudo)

ACTIONS

Power on machine.
Power off machine.
Reboot machine.
This returns the status of the plug/virtual machine.
List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.
Check the health of fence device
Display the XML metadata describing this resource.
Pulse a diagnostic interrupt to the processor(s).

STDIN PARAMETERS

Fencing Action (Default Value: reboot)
IPMI Lan Auth type.
Ciphersuite to use (same as ipmitool -C parameter)
Forces agent to use IPv4 addresses only
Forces agent to use IPv6 addresses only
IP Address or Hostname This parameter is always required.
TCP/UDP port to use for connection with device (Default Value: 623)
Use Lanplus to improve security of connection (Default Value: 0)
Login Name
Method to fence (onoff|cycle) (Default Value: onoff)
Login password or passphrase
Script to retrieve password
Privilege level on IPMI device (Default Value: administrator)
Timeout (sec) for IPMI operation
Verbose mode
Write debug information to given file
Display version information and exit
Display help and exit
Wait X seconds before fencing is started (Default Value: 0)
Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
Wait X seconds for cmd prompt after login (Default Value: 5)
Test X seconds for status change after ON/OFF (Default Value: 20)
Wait X seconds after issuing ON/OFF (Default Value: 2)
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
Count of attempts to retry power on (Default Value: 1)
Use sudo (without password) when calling 3rd party sotfware.
Path to sudo binary (Default Value: /usr/bin/sudo)
2009-10-20 fence_imm (Fence Agent)