NAME¶
dnssec-keymgr - Ensures correct DNSKEY coverage for a zone based
on a defined policy
SYNOPSIS¶
dnssec-keymgr [-K directory]
[-c file] [-f] [-k] [-q]
[-v] [-z] [-g path]
[-r path] [-s path]
[zone...]
DESCRIPTION¶
dnssec-keymgr is a high level Python wrapper to facilitate
the key rollover process for zones handled by BIND. It uses the BIND
commands for manipulating DNSSEC key metadata: dnssec-keygen and
dnssec-settime.
DNSSEC policy can be read from a configuration file (default
/etc/dnssec-policy.conf), from which the key parameters, publication and
rollover schedule, and desired coverage duration for any given zone can be
determined. This file may be used to define individual DNSSEC policies on a
per-zone basis, or to set a default policy used for all zones.
When dnssec-keymgr runs, it examines the DNSSEC keys for
one or more zones, comparing their timing metadata against the policies for
those zones. If key settings do not conform to the DNSSEC policy (for
example, because the policy has been changed), they are automatically
corrected.
A zone policy can specify a duration for which we want to ensure
the key correctness (coverage). It can also specify a rollover period
(roll-period). If policy indicates that a key should roll over before
the coverage period ends, then a successor key will automatically be created
and added to the end of the key series.
If zones are specified on the command line, dnssec-keymgr
will examine only those zones. If a specified zone does not already have
keys in place, then keys will be generated for it according to policy.
If zones are not specified on the command line, then
dnssec-keymgr will search the key directory (either the current
working directory or the directory set by the -K option), and check
the keys for all the zones represented in the directory.
It is expected that this tool will be run automatically and
unattended (for example, by cron).
OPTIONS¶
-c file
If -c is specified, then the DNSSEC policy is read
from file. (If not specified, then the policy is read from
/etc/dnssec-policy.conf; if that file doesn't exist, a built-in global default
policy is used.)
-f
Force: allow updating of key events even if they are
already in the past. This is not recommended for use with zones in which keys
have already been published. However, if a set of keys has been generated all
of which have publication and activation dates in the past, but the keys have
not been published in a zone as yet, then this option can be used to clean
them up and turn them into a proper series of keys with appropriate rollover
intervals.
-g keygen-path
Specifies a path to a dnssec-keygen binary. Used
for testing. See also the -s option.
-h
Print the dnssec-keymgr help summary and
exit.
-K directory
Sets the directory in which keys can be found. Defaults
to the current working directory.
-k
Only apply policies to KSK keys. See also the -z
option.
-q
Quiet: suppress printing of dnssec-keygen and
dnssec-settime.
-r randomdev
Specifies a path to a file containing random data. This
is passed to the dnssec-keygen binary using its -r option.
-s settime-path
Specifies a path to a dnssec-settime binary. Used
for testing. See also the -g option.
-v
Print the dnssec-keymgr version and exit.
-z
Only apply policies to ZSK keys. See also the -k
option.
POLICY CONFIGURATION¶
The dnssec-policy.conf file can specify three kinds of
policies:
•Policy classes (policy
name { ... };) can be inherited by zone policies or
other policy classes; these can be used to create sets of different security
profiles. For example, a policy class normal might specify 1024-bit key
sizes, but a class extra might specify 2048 bits instead; extra
would be used for zones that had unusually high security needs.
•Algorithm policies: (algorithm-policy
algorithm { ... }; ) override default per-algorithm
settings. For example, by default, RSASHA256 keys use 2048-bit key sizes for
both KSK and ZSK. This can be modified using algorithm-policy, and the
new key sizes would then be used for any key of type RSASHA256.
•Zone policies: (zone name
{ ... }; ) set policy for a single zone by name. A zone policy can inherit
a policy class by including a policy option. Zone names beginning with
digits (i.e., 0-9) must be quoted.
Options that can be specified in policies:
algorithm
The key algorithm. If no policy is defined, the default
is RSASHA256.
coverage
The length of time to ensure that keys will be correct;
no action will be taken to create new keys to be activated after this time.
This can be represented as a number of seconds, or as a duration using
human-readable units (examples: "1y" or "6 months"). A
default value for this option can be set in algorithm policies as well as in
policy classes or zone policies. If no policy is configured, the default is
six months.
directory
Specifies the directory in which keys should be
stored.
key-size
Specifies the number of bits to use in creating keys.
Takes two arguments: keytype (eihter "zsk" or "ksk") and
size. A default value for this option can be set in algorithm policies as well
as in policy classes or zone policies. If no policy is configured, the default
is 1024 bits for DSA keys and 2048 for RSA.
keyttl
The key TTL. If no policy is defined, the default is one
hour.
post-publish
How long after inactivation a key should be deleted from
the zone. Note: If roll-period is not set, this value is ignored. Takes
two arguments: keytype (eihter "zsk" or "ksk") and a
duration. A default value for this option can be set in algorithm policies as
well as in policy classes or zone policies. The default is one month.
pre-publish
How long before activation a key should be published.
Note: If roll-period is not set, this value is ignored. Takes two
arguments: keytype (either "zsk" or "ksk") and a duration.
A default value for this option can be set in algorithm policies as well as in
policy classes or zone policies. The default is one month.
roll-period
How frequently keys should be rolled over. Takes two
arguments: keytype (eihter "zsk" or "ksk") and a duration.
A default value for this option can be set in algorithm policies as well as in
policy classes or zone policies. If no policy is configured, the default is
one year for ZSK's. KSK's do not roll over by default.
standby
Not yet implemented.
REMAINING WORK¶
•Enable scheduling of KSK rollovers using the
-P sync and -D sync options to dnssec-keygen and
dnssec-settime. Check the parent zone (as in dnssec-checkds) to
determine when it's safe for the key to roll.
•Allow configuration of standby keys and use of
the REVOKE bit, for keys that use RFC 5011 semantics.
AUTHOR¶
Internet Systems Consortium, Inc.
COPYRIGHT¶
Copyright © 2016-2018 Internet Systems Consortium, Inc.
("ISC")