| STRUCT STATION_INFO(9) | Actions and configuration | STRUCT STATION_INFO(9) |
NAME¶
struct_station_info - station information
SYNOPSIS¶
struct station_info {
u64 filled;
u32 connected_time;
u32 inactive_time;
u64 rx_bytes;
u64 tx_bytes;
u16 llid;
u16 plid;
u8 plink_state;
s8 signal;
s8 signal_avg;
u8 chains;
s8 chain_signal[IEEE80211_MAX_CHAINS];
s8 chain_signal_avg[IEEE80211_MAX_CHAINS];
struct rate_info txrate;
struct rate_info rxrate;
u32 rx_packets;
u32 tx_packets;
u32 tx_retries;
u32 tx_failed;
u32 rx_dropped_misc;
struct sta_bss_parameters bss_param;
struct nl80211_sta_flag_update sta_flags;
int generation;
const u8 * assoc_req_ies;
size_t assoc_req_ies_len;
u32 beacon_loss_count;
s64 t_offset;
enum nl80211_mesh_power_mode local_pm;
enum nl80211_mesh_power_mode peer_pm;
enum nl80211_mesh_power_mode nonpeer_pm;
u32 expected_throughput;
u64 tx_duration;
u64 rx_duration;
u64 rx_beacon;
u8 rx_beacon_signal_avg;
u8 connected_to_gate;
struct cfg80211_tid_stats * pertid;
s8 ack_signal;
s8 avg_ack_signal;
u16 airtime_weight;
u32 rx_mpdu_count;
u32 fcs_err_count;
u32 airtime_link_metric;
};
MEMBERS¶
filled
bitflag of flags using the bits of enum nl80211_sta_info
to indicate the relevant values in this struct for them
connected_time
time(in secs) since a station is last connected
inactive_time
time since last station activity (tx/rx) in
milliseconds
rx_bytes
bytes (size of MPDUs) received from this station
tx_bytes
bytes (size of MPDUs) transmitted to this station
llid
mesh local link id
plid
mesh peer link id
plink_state
mesh peer link state
signal
The signal strength, type depends on the wiphy's
signal_type. For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
signal_avg
Average signal strength, type depends on the wiphy's
signal_type. For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
chains
bitmask for filled values in chain_signal,
chain_signal_avg
chain_signal[IEEE80211_MAX_CHAINS]
per-chain signal strength of last received packet in
dBm
chain_signal_avg[IEEE80211_MAX_CHAINS]
per-chain signal strength average in dBm
txrate
current unicast bitrate from this station
rxrate
current unicast bitrate to this station
rx_packets
packets (MSDUs & MMPDUs) received from this
station
tx_packets
packets (MSDUs & MMPDUs) transmitted to this
station
tx_retries
cumulative retry counts (MPDUs)
tx_failed
number of failed transmissions (MPDUs) (retries exceeded,
no ACK)
rx_dropped_misc
Dropped for un-specified reason.
bss_param
current BSS parameters
sta_flags
station flags mask & values
generation
generation number for nl80211 dumps. This number should
increase every time the list of stations changes, i.e. when a station is added
or removed, so that userspace can tell whether it got a consistent
snapshot.
assoc_req_ies
IEs from (Re)Association Request. This is used only when
in AP mode with drivers that do not use user space MLME/SME implementation.
The information is provided for the cfg80211_new_sta calls to notify
user space of the IEs.
assoc_req_ies_len
Length of assoc_req_ies buffer in octets.
beacon_loss_count
Number of times beacon loss event has triggered.
t_offset
Time offset of the station relative to this host.
local_pm
local mesh STA power save mode
peer_pm
peer mesh STA power save mode
nonpeer_pm
non-peer mesh STA power save mode
expected_throughput
expected throughput in kbps (including 802.11 headers)
towards this station.
tx_duration
aggregate PPDU duration(usecs) for all the frames to a
peer
rx_duration
aggregate PPDU duration(usecs) for all the frames from a
peer
rx_beacon
number of beacons received from this peer
rx_beacon_signal_avg
signal strength average (in dBm) for beacons received
from this peer
connected_to_gate
true if mesh STA has a path to mesh gate
pertid
per-TID statistics, see struct cfg80211_tid_stats, using
the last (IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs.
Note that this doesn't use the filled bit, but is used if
non-NULL.
ack_signal
signal strength (in dBm) of the last ACK frame.
avg_ack_signal
average rssi value of ack packet for the no of msdu's has
been sent.
airtime_weight
current airtime scheduling weight
rx_mpdu_count
number of MPDUs received from this station
fcs_err_count
number of packets (MPDUs) received from this station with
an FCS error. This counter should be incremented only when TA of the received
packet with an FCS error matches the peer MAC address.
airtime_link_metric
mesh airtime link metric.
DESCRIPTION¶
Station information filled by driver for get_station and dump_station.
AUTHOR¶
Johannes Berg <johannes@sipsolutions.net>
Author.
COPYRIGHT¶
| June 2024 | Kernel Hackers Manual 3.10 |