Public Types¶

typedef _Codecvt::state_type state_type

typedef wchar_t char_type
typedef char_traits< wchar_t > traits_type
typedef traits_type::int_type int_type
typedef traits_type::pos_type pos_type
typedef traits_type::off_type off_type

typedef basic_streambuf< char_type, traits_type > __streambuf_type
This is a non-standard type.

Public Member Functions¶

wbuffer_convert ()
Default constructor. wbuffer_convert (const wbuffer_convert &)=delete
wbuffer_convert (streambuf *__bytebuf, _Codecvt *__pcvt=new _Codecvt, state_type __state=state_type())
locale getloc () const
Locale access. streamsize in_avail ()
Looking ahead into the stream. wbuffer_convert & operator= (const wbuffer_convert &)=delete
locale pubimbue (const locale &__loc)
Entry point for imbue(). streambuf * rdbuf () const noexcept
streambuf * rdbuf (streambuf *__bytebuf) noexcept
int_type sbumpc ()
Getting the next character. int_type sgetc ()
Getting the next character. streamsize sgetn (char_type *__s, streamsize __n)
Entry point for xsgetn. int_type snextc ()
Getting the next character. int_type sputbackc (char_type __c)
Pushing characters back into the input stream. int_type sputc (char_type __c)
Entry point for all single-character output functions. streamsize sputn (const char_type *__s, streamsize __n)
Entry point for all single-character output functions. state_type state () const noexcept
The conversion state following the last conversion. int_type sungetc ()
Moving backwards in the input stream.

basic_streambuf * pubsetbuf (char_type *__s, streamsize __n)
Entry points for derived buffer functions. pos_type pubseekoff (off_type __off, ios_base::seekdir __way, ios_base::openmode __mode=ios_base::in|ios_base::out)
Alters the stream position. pos_type pubseekpos (pos_type __sp, ios_base::openmode __mode=ios_base::in|ios_base::out)
Alters the stream position. int pubsync ()
Calls virtual sync function.

Protected Member Functions¶

void __safe_gbump (streamsize __n)
void __safe_pbump (streamsize __n)
void gbump (int __n)
Moving the read position. virtual void imbue (const locale &__loc)
Changes translations. _Wide_streambuf::int_type overflow (typename _Wide_streambuf::int_type __out)
Consumes data from the buffer; writes to the controlled sequence. virtual int_type pbackfail (int_type __c=traits_type::eof())
Tries to back up the input sequence. void pbump (int __n)
Moving the write position. virtual pos_type seekoff (off_type, ios_base::seekdir, ios_base::openmode=ios_base::in|ios_base::out)
Alters the stream positions. virtual pos_type seekpos (pos_type, ios_base::openmode=ios_base::in|ios_base::out)
Alters the stream positions. virtual basic_streambuf< char_type, char_traits< wchar_t > > * setbuf (char_type *, streamsize)
Manipulates the buffer. void setg (char_type *__gbeg, char_type *__gnext, char_type *__gend)
Setting the three read area pointers. void setp (char_type *__pbeg, char_type *__pend)
Setting the three write area pointers. virtual streamsize showmanyc ()
Investigating the data available. void swap (basic_streambuf &__sb)
int sync ()
Synchronizes the buffer arrays with the controlled sequences. virtual int_type uflow ()
Fetches more data from the controlled sequence. _Wide_streambuf::int_type underflow ()
Fetches more data from the controlled sequence. virtual streamsize xsgetn (char_type *__s, streamsize __n)
Multiple character extraction. virtual streamsize xsputn (const char_type *__s, streamsize __n)
Multiple character insertion. streamsize xsputn (const typename _Wide_streambuf::char_type *__s, streamsize __n)

char_type * eback () const
Access to the get area. char_type * gptr () const
Access to the get area. char_type * egptr () const
Access to the get area.

char_type * pbase () const
Access to the put area. char_type * pptr () const
Access to the put area. char_type * epptr () const
Access to the put area.

Protected Attributes¶

locale _M_buf_locale
Current locale setting. char_type * _M_in_beg
Start of get area. char_type * _M_in_cur
Current read area. char_type * _M_in_end
End of get area. char_type * _M_out_beg
Start of put area. char_type * _M_out_cur
Current put area. char_type * _M_out_end
End of put area.

template<typename _Codecvt, typename _Elem = wchar_t, typename _Tr = char_traits<_Elem>>¶

class std::wbuffer_convert< _Codecvt, _Elem, _Tr >" Buffer conversions.

typedef basic_streambuf<char_type, traits_type> std::basic_streambuf< wchar_t , char_traits< wchar_t > >::__streambuf_type [inherited]¶

This is a non-standard type.

typedef wchar_t std::basic_streambuf< wchar_t , char_traits< wchar_t > >::char_type [inherited]¶

These are standard types. They permit a standardized way of referring to names of (or names dependent on) the template parameters, which are specific to the implementation.

typedef traits_type::int_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::int_type [inherited]¶

These are standard types. They permit a standardized way of referring to names of (or names dependent on) the template parameters, which are specific to the implementation.

typedef traits_type::off_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::off_type [inherited]¶

These are standard types. They permit a standardized way of referring to names of (or names dependent on) the template parameters, which are specific to the implementation.

typedef traits_type::pos_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::pos_type [inherited]¶

These are standard types. They permit a standardized way of referring to names of (or names dependent on) the template parameters, which are specific to the implementation.

typedef char_traits< wchar_t > std::basic_streambuf< wchar_t , char_traits< wchar_t > >::traits_type [inherited]¶

These are standard types. They permit a standardized way of referring to names of (or names dependent on) the template parameters, which are specific to the implementation.

template<typename _Codecvt , typename _Elem = wchar_t, typename _Tr = char_traits<_Elem>> std::wbuffer_convert< _Codecvt, _Elem, _Tr >::wbuffer_convert () [inline]¶

Default constructor.

template<typename _Codecvt , typename _Elem = wchar_t, typename _Tr = char_traits<_Elem>> std::wbuffer_convert< _Codecvt, _Elem, _Tr >::wbuffer_convert (streambuf * __bytebuf, _Codecvt * __pcvt = new _Codecvt, state_type __state = state_type()) [inline], [explicit]¶

Constructor.

Parameters

Takes ownership of __pcvt and will delete it in the destructor.

References std::basic_streambuf< wchar_t, char_traits< wchar_t > >::setg(), and std::basic_streambuf< wchar_t, char_traits< wchar_t > >::setp().

char_type* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::eback () const [inline], [protected], [inherited]¶

Access to the get area. These functions are only available to other protected functions, including derived classes.

• eback() returns the beginning pointer for the input sequence
• gptr() returns the next pointer for the input sequence
• egptr() returns the end pointer for the input sequence

char_type* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::egptr () const [inline], [protected], [inherited]¶

Access to the get area. These functions are only available to other protected functions, including derived classes.

• eback() returns the beginning pointer for the input sequence
• gptr() returns the next pointer for the input sequence
• egptr() returns the end pointer for the input sequence

char_type* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::epptr () const [inline], [protected], [inherited]¶

Access to the put area. These functions are only available to other protected functions, including derived classes.

• pbase() returns the beginning pointer for the output sequence
• pptr() returns the next pointer for the output sequence
• epptr() returns the end pointer for the output sequence

void std::basic_streambuf< wchar_t , char_traits< wchar_t > >::gbump (int __n) [inline], [protected], [inherited]¶

Moving the read position.

Parameters

This just advances the read position without returning any data.

locale std::basic_streambuf< wchar_t , char_traits< wchar_t > >::getloc () const [inline], [inherited]¶

Locale access.

Returns

If pubimbue(loc) has been called, then the most recent loc is returned. Otherwise the global locale in effect at the time of construction is returned.

char_type* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::gptr () const [inline], [protected], [inherited]¶

Access to the get area. These functions are only available to other protected functions, including derived classes.

• eback() returns the beginning pointer for the input sequence
• gptr() returns the next pointer for the input sequence
• egptr() returns the end pointer for the input sequence

virtual void std::basic_streambuf< wchar_t , char_traits< wchar_t > >::imbue (const locale & __loc) [inline], [protected], [virtual], [inherited]¶

Changes translations.

Parameters

Translations done during I/O which depend on the current locale are changed by this call. The standard adds, Between invocations of this function a class derived from streambuf can safely cache results of calls to locale functions and to members of facets so obtained.

Note

streamsize std::basic_streambuf< wchar_t , char_traits< wchar_t > >::in_avail () [inline], [inherited]¶

Looking ahead into the stream.

Returns

If a read position is available, returns the number of characters available for reading before the buffer must be refilled. Otherwise returns the derived showmanyc().

template<typename _Codecvt , typename _Elem = wchar_t, typename _Tr = char_traits<_Elem>> _Wide_streambuf::int_type std::wbuffer_convert< _Codecvt, _Elem, _Tr >::overflow (typename _Wide_streambuf::int_type __c) [inline], [protected], [virtual]¶

Consumes data from the buffer; writes to the controlled sequence.

Parameters

Returns

Informally, this function is called when the output buffer is full (or does not exist, as buffering need not actually be done). If a buffer exists, it is consumed, with some effect on the controlled sequence. (Typically, the buffer is written out to the sequence verbatim.) In either case, the character c is also written out, if __c is not eof().

For a formal definition of this function, see a good text such as Langer & Kreft, or [27.5.2.4.5]/3-7.

A functioning output streambuf can be created by overriding only this function (no buffer area will be used).

Note

Reimplemented from std::basic_streambuf< wchar_t, char_traits< wchar_t > >.

References std::basic_streambuf< wchar_t, char_traits< wchar_t > >::sputc().

virtual int_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::pbackfail (int_type __c = traits_type::eof()) [inline], [protected], [virtual], [inherited]¶

Tries to back up the input sequence.

Parameters

Returns

Postcondition

Note

char_type* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::pbase () const [inline], [protected], [inherited]¶

Access to the put area. These functions are only available to other protected functions, including derived classes.

• pbase() returns the beginning pointer for the output sequence
• pptr() returns the next pointer for the output sequence
• epptr() returns the end pointer for the output sequence

void std::basic_streambuf< wchar_t , char_traits< wchar_t > >::pbump (int __n) [inline], [protected], [inherited]¶

Moving the write position.

Parameters

This just advances the write position without returning any data.

char_type* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::pptr () const [inline], [protected], [inherited]¶

Access to the put area. These functions are only available to other protected functions, including derived classes.

• pbase() returns the beginning pointer for the output sequence
• pptr() returns the next pointer for the output sequence
• epptr() returns the end pointer for the output sequence

locale std::basic_streambuf< wchar_t , char_traits< wchar_t > >::pubimbue (const locale & __loc) [inline], [inherited]¶

Entry point for imbue().

Parameters

Returns

Calls the derived imbue(__loc).

pos_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::pubseekoff (off_type __off, ios_base::seekdir __way, ios_base::openmode __mode = ios_base::in | ios_base::out) [inline], [inherited]¶

Alters the stream position.

Parameters

Calls virtual seekoff function.

pos_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::pubseekpos (pos_type __sp, ios_base::openmode __mode = ios_base::in | ios_base::out) [inline], [inherited]¶

Alters the stream position.

Parameters

Calls virtual seekpos function.

basic_streambuf* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::pubsetbuf (char_type * __s, streamsize __n) [inline], [inherited]¶

Entry points for derived buffer functions. The public versions of pubfoo dispatch to the protected derived foo member functions, passing the arguments (if any) and returning the result unchanged.

int std::basic_streambuf< wchar_t , char_traits< wchar_t > >::pubsync () [inline], [inherited]¶

Calls virtual sync function.

int_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::sbumpc () [inline], [inherited]¶

Getting the next character.

Returns

If the input read position is available, returns that character and increments the read pointer, otherwise calls and returns uflow().

virtual pos_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::seekoff (off_type, ios_base::seekdir, ios_base::openmode = ios_base::in | ios_base::out) [inline], [protected], [virtual], [inherited]¶

Alters the stream positions. Each derived class provides its own appropriate behavior.

Note

virtual pos_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::seekpos (pos_type, ios_base::openmode = ios_base::in | ios_base::out) [inline], [protected], [virtual], [inherited]¶

Alters the stream positions. Each derived class provides its own appropriate behavior.

Note

virtual basic_streambuf<char_type,char_traits< wchar_t > >* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::setbuf (char_type *, streamsize) [inline], [protected], [virtual], [inherited]¶

Manipulates the buffer. Each derived class provides its own appropriate behavior. See the next-to-last paragraph of https://gcc.gnu.org/onlinedocs/libstdc++/manual/streambufs.html#io.streambuf.buffering for more on this function.

Note

void std::basic_streambuf< wchar_t , char_traits< wchar_t > >::setg (char_type * __gbeg, char_type * __gnext, char_type * __gend) [inline], [protected], [inherited]¶

Setting the three read area pointers.

Parameters

Postcondition

void std::basic_streambuf< wchar_t , char_traits< wchar_t > >::setp (char_type * __pbeg, char_type * __pend) [inline], [protected], [inherited]¶

Setting the three write area pointers.

Parameters

Postcondition

int_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::sgetc () [inline], [inherited]¶

Getting the next character.

Returns

If the input read position is available, returns that character, otherwise calls and returns underflow(). Does not move the read position after fetching the character.

streamsize std::basic_streambuf< wchar_t , char_traits< wchar_t > >::sgetn (char_type * __s, streamsize __n) [inline], [inherited]¶

Entry point for xsgetn.

Parameters

Returns xsgetn(__s,__n). The effect is to fill __s[0] through __s[__n-1] with characters from the input sequence, if possible.

virtual streamsize std::basic_streambuf< wchar_t , char_traits< wchar_t > >::showmanyc () [inline], [protected], [virtual], [inherited]¶

Investigating the data available.

Returns

If it returns a positive value, then successive calls to underflow() will not return traits::eof() until at least that number of characters have been supplied. If showmanyc() returns -1, then calls to underflow() or uflow() will fail. [27.5.2.4.3]/1

Note

int_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::snextc () [inline], [inherited]¶

Getting the next character.

Returns

Calls sbumpc(), and if that function returns traits::eof(), so does this function. Otherwise, sgetc().

int_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::sputbackc (char_type __c) [inline], [inherited]¶

Pushing characters back into the input stream.

Parameters

Returns

Similar to sungetc(), but __c is pushed onto the stream instead of the previous character. If successful, the next character fetched from the input stream will be __c.

int_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::sputc (char_type __c) [inline], [inherited]¶

Entry point for all single-character output functions.

Parameters

Returns

One of two public output functions.

If a write position is available for the output sequence (i.e., the buffer is not full), stores __c in that position, increments the position, and returns traits::to_int_type(__c). If a write position is not available, returns overflow(__c).

streamsize std::basic_streambuf< wchar_t , char_traits< wchar_t > >::sputn (const char_type * __s, streamsize __n) [inline], [inherited]¶

Entry point for all single-character output functions.

Parameters

One of two public output functions.

Returns xsputn(__s,__n). The effect is to write __s[0] through __s[__n-1] to the output sequence, if possible.

template<typename _Codecvt , typename _Elem = wchar_t, typename _Tr = char_traits<_Elem>> state_type std::wbuffer_convert< _Codecvt, _Elem, _Tr >::state () const [inline], [noexcept]¶

The conversion state following the last conversion.

int_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::sungetc () [inline], [inherited]¶

Moving backwards in the input stream.

Returns

If a putback position is available, this function decrements the input pointer and returns that character. Otherwise, calls and returns pbackfail(). The effect is to unget the last character gotten.

template<typename _Codecvt , typename _Elem = wchar_t, typename _Tr = char_traits<_Elem>> int std::wbuffer_convert< _Codecvt, _Elem, _Tr >::sync (void) [inline], [protected], [virtual]¶

Synchronizes the buffer arrays with the controlled sequences.

Returns

Each derived class provides its own appropriate behavior, including the definition of failure.

Note

Reimplemented from std::basic_streambuf< wchar_t, char_traits< wchar_t > >.

References std::basic_streambuf< _CharT, _Traits >::pubsync().

virtual int_type std::basic_streambuf< wchar_t , char_traits< wchar_t > >::uflow () [inline], [protected], [virtual], [inherited]¶

Fetches more data from the controlled sequence.

Returns

Informally, this function does the same thing as underflow(), and in fact is required to call that function. It also returns the new character, like underflow() does. However, this function also moves the read position forward by one.

template<typename _Codecvt , typename _Elem = wchar_t, typename _Tr = char_traits<_Elem>> _Wide_streambuf::int_type std::wbuffer_convert< _Codecvt, _Elem, _Tr >::underflow () [inline], [protected], [virtual]¶

Fetches more data from the controlled sequence.

Returns

Informally, this function is called when the input buffer is exhausted (or does not exist, as buffering need not actually be done). If a buffer exists, it is refilled. In either case, the next available character is returned, or traits::eof() to indicate a null pending sequence.

For a formal definition of the pending sequence, see a good text such as Langer & Kreft, or [27.5.2.4.3]/7-14.

A functioning input streambuf can be created by overriding only this function (no buffer area will be used). For an example, see https://gcc.gnu.org/onlinedocs/libstdc++/manual/streambufs.html

Note

Reimplemented from std::basic_streambuf< wchar_t, char_traits< wchar_t > >.

References std::basic_streambuf< wchar_t, char_traits< wchar_t > >::egptr(), and std::basic_streambuf< wchar_t, char_traits< wchar_t > >::gptr().

streamsize std::basic_streambuf< wchar_t , char_traits< wchar_t > >::xsgetn (char_type * __s, streamsize __n) [protected], [virtual], [inherited]¶

Multiple character extraction.

Parameters

Returns

Fills __s[0] through __s[__n-1] with characters from the input sequence, as if by sbumpc(). Stops when either __n characters have been copied, or when traits::eof() would be copied.

It is expected that derived classes provide a more efficient implementation by overriding this definition.

streamsize std::basic_streambuf< wchar_t , char_traits< wchar_t > >::xsputn (const char_type * __s, streamsize __n) [protected], [virtual], [inherited]¶

Multiple character insertion.

Parameters

Returns

Writes __s[0] through __s[__n-1] to the output sequence, as if by sputc(). Stops when either n characters have been copied, or when sputc() would return traits::eof().

It is expected that derived classes provide a more efficient implementation by overriding this definition.

locale std::basic_streambuf< wchar_t , char_traits< wchar_t > >::_M_buf_locale [protected], [inherited]¶

Current locale setting.

char_type* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::_M_in_beg [protected], [inherited]¶

Start of get area.

char_type* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::_M_in_cur [protected], [inherited]¶

Current read area.

char_type* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::_M_in_end [protected], [inherited]¶

End of get area.

char_type* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::_M_out_beg [protected], [inherited]¶

Start of put area.

char_type* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::_M_out_cur [protected], [inherited]¶

Current put area.

char_type* std::basic_streambuf< wchar_t , char_traits< wchar_t > >::_M_out_end [protected], [inherited]¶

End of put area.