Scroll to navigation

dapltest(1) USER COMMANDS dapltest(1)

NAME

dapltest - test for the Direct Access Programming Library (DAPL)

DESCRIPTION

Dapltest is a set of tests developed to exercise, characterize, and verify the DAPL interfaces during development and porting. At least two instantiations of the test must be run. One acts as the server, fielding requests and spawning server-side test threads as needed. Other client invocations connect to the server and issue test requests. The server side of the test, once invoked, listens continuously for client connection requests, until quit or killed. Upon receipt of a connection request, the connection is established, the server and client sides swap version numbers to verify that they are able to communicate, and the client sends the test request to the server. If the version numbers match, and the test request is well-formed, the server spawns the threads needed to run the test before awaiting further connections.

USAGE

dapltest [ -f script_file_name ] [ -T S|Q|T|P|L ] [ -D device_name ] [ -d ] [ -R HT|LL|EC|PM|BE ]

With no arguments, dapltest runs as a server using default values, and loops accepting requests from clients.

The -f option allows all arguments to be placed in a file, to ease test automation.

The following arguments are common to all tests:

[ -T S|Q|T|P|L ]
Test function to be performed:
- server loop
- quit, client requests that server wait for any outstanding tests to complete, then clean up and exit
- transaction test, transfers data between client and server
- performance test, times DTO operations
- limit test, exhausts various resources, runs in client w/o server interaction Default: S
[ -D device_name ]
Specifies the interface adapter name as documented in the /etc/dat.conf static configuration file. This name corresponds to the provider library to open. Default: none
[ -d ]
Enables extra debug verbosity, primarily tracing of the various DAPL operations as they progress. Repeating this parameter increases debug spew. Errors encountered result in the test spewing some explanatory text and stopping; this flag provides more detail about what lead up to the error. Default: zero
[ -R BE ]
Indicate the quality of service (QoS) desired. Choices are:
- high throughput
- low latency
- economy (neither HT nor LL)
- premium
- best effort Default: BE

Usage - Quit test client


dapltest [Common_Args] [ -s server_name ]
Quit testing (-T Q) connects to the server to ask it to clean up and
exit (after it waits for any outstanding test runs to complete).
In addition to being more polite than simply killing the server,
this test exercises the DAPL object teardown code paths.
There is only one argument other than those supported by all tests:
-s server_name Specifies the name of the server interface.
No default.
Usage - Transaction test client


dapltest [Common_Args] [ -s server_name ]
[ -t threads ] [ -w endpoints ] [ -i iterations ] [ -Q ]
[ -V ] [ -P ] OPclient OPserver [ op3,
Transaction testing (-T T) transfers a variable amount of data between
client and server. The data transfer can be described as a sequence of
individual operations; that entire sequence is transferred 'iterations'
times by each thread over all of its endpoint(s).
The following parameters determine the behavior of the transaction test:
-s server_name Specifies the name or IP address of the server interface.
No default.
[ -t threads ] Specify the number of threads to be used.
Default: 1
[ -w endpoints ] Specify the number of connected endpoints per thread.
Default: 1
[ -i iterations ] Specify the number of times the entire sequence
of data transfers will be made over each endpoint.
Default: 1000
[ -Q ] Funnel completion events into a CNO.
Default: use EVDs
[ -V ] Validate the data being transferred.
Default: ignore the data
[ -P ] Turn on DTO completion polling
Default: off
OP1 OP2 [ OP3, ... ]
A single transaction (OPx) consists of:
server|client Indicates who initiates the
data transfer.
SR|RR|RW Indicates the type of transfer:
SR send/recv
RR RDMA read
RW RDMA write
Defaults: none
[ seg_size [ num_segs ] ]
Indicates the amount and format
of the data to be transferred.
Default: 4096 1
(i.e., 1 4KB buffer)
[ -f ] For SR transfers only, indicates
that a client's send transfer
completion should be reaped when
the next recv completion is reaped.
Sends and receives must be paired
(one client, one server, and in that
order) for this option to be used.
Restrictions:
Due to the flow control algorithm used by the transaction test, there
must be at least one SR OP for both the client and the server.
Requesting data validation (-V) causes the test to automatically append
three OPs to those specified. These additional operations provide
synchronization points during each iteration, at which all user-specified
transaction buffers are checked. These three appended operations satisfy
the "one SR in each direction" requirement.
The transaction OP list is printed out if -d is supplied.
Usage - Performance test client


dapltest [Common_Args] -s server_name [ -m p|b ]
[ -i iterations ] [ -p pipeline ] OP
Performance testing (-T P) times the transfer of an operation.
The operation is posted 'iterations' times.
The following parameters determine the behavior of the transaction test:
-s server_name Specifies the name or IP address of the server interface.
No default.
-m b|p Used to choose either blocking (b) or polling (p)
Default: blocking (b)
[ -i iterations ] Specify the number of times the entire sequence
of data transfers will be made over each endpoint.
Default: 1000
[ -p pipeline ] Specify the pipline length, valid arguments are in
the range [0,MAX_SEND_DTOS]. If a value greater than
MAX_SEND_DTOS is requested the value will be
adjusted down to MAX_SEND_DTOS.
Default: MAX_SEND_DTOS

OP Specifies the operation as follow:
RR|RW Indicates the type of transfer:
RR RDMA read
RW RDMA write
Defaults: none
[ seg_size [ num_segs ] ]
Indicates the amount and format
of the data to be transferred.
Default: 4096 1
(i.e., 1 4KB buffer)

Usage - Limit test client


Limit testing (-T L) neither requires nor connects to any server
instance. The client runs one or more tests which attempt to
exhaust various resources to determine DAPL limits and exercise
DAPL error paths. If no arguments are given, all tests are run.
Limit testing creates the sequence of DAT objects needed to
move data back and forth, attempting to find the limits supported
for the DAPL object requested. For example, if the LMR creation
limit is being examined, the test will create a set of
{IA, PZ, CNO, EVD, EP} before trying to run dat_lmr_create() to
failure using that set of DAPL objects. The 'width' parameter
can be used to control how many of these parallel DAPL object
sets are created before beating upon the requested constructor.
Use of -m limits the number of dat_*_create() calls that will
be attempted, which can be helpful if the DAPL in use supports
essentailly unlimited numbers of some objects.
The limit test arguments are:
[ -m maximum ] Specify the maximum number of dapl_*_create()
attempts.
Default: run to object creation failure
[ -w width ] Specify the number of DAPL object sets to
create while initializing.
Default: 1
[ limit_ia ] Attempt to exhaust dat_ia_open()
[ limit_pz ] Attempt to exhaust dat_pz_create()
[ limit_cno ] Attempt to exhaust dat_cno_create()
[ limit_evd ] Attempt to exhaust dat_evd_create()
[ limit_ep ] Attempt to exhaust dat_ep_create()
[ limit_rsp ] Attempt to exhaust dat_rsp_create()
[ limit_psp ] Attempt to exhaust dat_psp_create()
[ limit_lmr ] Attempt to exhaust dat_lmr_create(4KB)
[ limit_rpost ] Attempt to exhaust dat_ep_post_recv(4KB)
[ limit_size_lmr ] Probe maximum size dat_lmr_create()

Default: run all tests

EXAMPLES

dapltest -T S -d -D OpenIB-cma


Starts a server process with debug verbosity.
dapltest -T T -d -s host1-ib0 -D OpenIB-cma -i 100 client SR 4096 2 server SR 4096 2


Runs a transaction test, with both sides
sending one buffer with two 4KB segments,
one hundred times.
dapltest -T P -d -s host1-ib0 -D OpenIB-cma -i 100 RW 4096 2


Runs a performance test, with the client
sending one buffer with two 4KB segments,
one hundred times.
dapltest -T Q -s host1-ib0 -D OpenIB-cma


Asks the server to clean up and exit.
dapltest -T L -D OpenIB-cma -d -w 16 -m 1000


Runs all of the limit tests, setting up
16 complete sets of DAPL objects, and
creating at most a thousand instances
when trying to exhaust resources.
dapltest -T T -V -d -t 2 -w 4 -i 55555 -s linux3 -D OpenIB-cma client RW 4096 1 server RW 2048 4 client SR 1024 4 server SR 4096 2 client SR 1024 3 -f server SR 2048 1 -f


Runs a more complicated transaction test,
with two thread using four EPs each,
sending a more complicated buffer pattern
for a larger number of iterations,
validating the data received.

(and To Do List)


Use of CNOs (-Q) is not yet supported.
Further limit tests could be added.
February 23, 2007 uDAPL 1.2