NAME¶

ndiff - Utility to compare the results of Nmap scans

SYNOPSIS¶

ndiff [options] {a.xml} {b.xml}

DESCRIPTION¶

Ndiff is a tool to aid in the comparison of Nmap scans. It takes two Nmap XML output files and prints the differences between them. The differences observed are:

Ndiff, like the standard diff utility, compares two scans at a time.

OPTIONS SUMMARY¶

-h, --help

-v, --verbose

--text

--xml

Any other arguments are taken to be the names of Nmap XML output files. There must be exactly two.

EXAMPLE¶

Let´s use Ndiff to compare the output of two Nmap scans that use different options. In the first, we´ll do a fast scan (-F), which scans fewer ports for speed. In the second, we´ll scan the larger default set of ports, and run an NSE script.

# nmap -F scanme.nmap.org -oX scanme-1.xml
# nmap --script=html-title scanme.nmap.org -oX scanme-2.xml
$ ndiff -v scanme-1.xml scanme-2.xml
-Nmap 5.35DC1 at 2010-07-16 12:09
+Nmap 5.35DC1 at 2010-07-16 12:13


 scanme.nmap.org (64.13.134.52):


 Host is up.
-Not shown: 95 filtered ports
+Not shown: 993 filtered ports


 PORT      STATE  SERVICE VERSION


 22/tcp    open   ssh


 25/tcp    closed smtp


 53/tcp    open   domain
+70/tcp    closed gopher


 80/tcp    open   http
+|_ html-title: Go ahead and ScanMe!


 113/tcp   closed auth
+31337/tcp closed Elite

Changes are marked by a - or + at the beginning of a line. We can see from the output that the scan without the -F fast scan option found two additional ports: 70 and 31337. The html-title script produced some additional output for port 80. From the port counts, we may infer that the fast scan scanned 100 ports (95 filtered, 3 open, and 2 closed), while the normal scan scanned 1000 (993 filtered, 3 open, and 4 closed).

The -v (or --verbose) option to Ndiff made it show even the ports that didn´t change, like 22 and 25. Without -v, they would not have been shown.

OUTPUT¶

There are two output modes: text and XML. Text output is the default, and can also be selected with the --text option. Text output resembles a unified diff of Nmap´s normal terminal output. Each line is preceded by a character indicating whether and how it changed. - means that the line was in the first scan but not in the second; + means it was in the second but not the first. A line that changed is represented by a - line followed by a + line. Lines that did not change are preceded by a blank space.

Example 1 is an example of text output. Here, port 80 on the host photos-cache-snc1.facebook.com gained a service version (lighttpd 1.5.0). The host at 69.63.179.25 changed its reverse DNS name. The host at 69.63.184.145 was completely absent in the first scan but came up in the second.

Example 1. Ndiff text output

-Nmap 4.85BETA3 at 2009-03-15 11:00
+Nmap 4.85BETA4 at 2009-03-18 11:00


 photos-cache-snc1.facebook.com (69.63.178.41):


 Host is up.


 Not shown: 99 filtered ports


 PORT   STATE SERVICE VERSION
-80/tcp open  http
+80/tcp open  http    lighttpd 1.5.0
-cm.out.snc1.tfbnw.net (69.63.179.25):
+mailout-snc1.facebook.com (69.63.179.25):


 Host is up.


 Not shown: 100 filtered ports
+69.63.184.145:
+Host is up.
+Not shown: 98 filtered ports
+PORT    STATE SERVICE  VERSION
+80/tcp  open  http     Apache httpd 1.3.41.fb1
+443/tcp open  ssl/http Apache httpd 1.3.41.fb1

XML output, intended to be processed by other programs, is selected with the --xml option. It is based on Nmap´s XML output, with a few additional elements to indicate differences. The XML document is enclosed in nmapdiff and scandiff elements. Host differences are enclosed in hostdiff tags and port differences are enclosed in portdiff tags. Inside a hostdiff or portdiff, a and b tags show the state of the host or port in the first scan (a) or the second scan (b).

Example 2 shows the XML diff of the same scans shown above in Example 1. Notice how port 80 of photos-cache-snc1.facebook.com is enclosed in portdiff tags. For 69.63.179.25, the old hostname is in a tags and the new is in b. For the new host 69.63.184.145, there is a b in the hostdiff without a corresponding a, indicating that there was no information for the host in the first scan.

Example 2. Ndiff XML output

<?xml version="1.0" encoding="UTF-8"?>
<nmapdiff version="1">


  <scandiff>


    <hostdiff>


      <host>


        <status state="up"/>


        <address addr="69.63.178.41" addrtype="ipv4"/>


        <hostnames>


          <hostname name="photos-cache-snc1.facebook.com"/>


        </hostnames>


        <ports>


          <extraports count="99" state="filtered"/>


          <portdiff>


            <port portid="80" protocol="tcp">


              <state state="open"/>


              <a>


                <service name="http"/>


              </a>


              <b>


                <service name="http" product="lighttpd" version="1.5.0"/>


              </b>


            </port>


          </portdiff>


        </ports>


      </host>


    </hostdiff>


    <hostdiff>


      <host>


        <status state="up"/>


        <address addr="69.63.179.25" addrtype="ipv4"/>


        <hostnames>


          <a>


            <hostname name="cm.out.snc1.tfbnw.net"/>


          </a>


          <b>


            <hostname name="mailout-snc1.facebook.com"/>


          </b>


        </hostnames>


        <ports>


          <extraports count="100" state="filtered"/>


        </ports>


      </host>


    </hostdiff>


    <hostdiff>


      <b>


        <host>


          <status state="up"/>


          <address addr="69.63.184.145" addrtype="ipv4"/>


          <ports>


            <extraports count="98" state="filtered"/>


            <port portid="80" protocol="tcp">


              <state state="open"/>


              <service name="http" product="Apache httpd"


                       version="1.3.41.fb1"/>


            </port>


            <port portid="443" protocol="tcp">


              <state state="open"/>


              <service name="http" product="Apache httpd" tunnel="ssl"


                       version="1.3.41.fb1"/>


            </port>


          </ports>


        </host>


      </b>


    </hostdiff>


  </scandiff>
</nmapdiff>

PERIODIC DIFFS¶

Using Nmap, Ndiff, cron, and a shell script, it´s possible to scan a network daily and get email reports of the state of the network and changes since the previous scan. Example 3 shows the script that ties it together.

Example 3. Scanning a network periodically with Ndiff and cron

#!/bin/sh
TARGETS="targets"
OPTIONS="-v -T4 -F -sV"
date=`date +%F`
cd /root/scans
nmap $OPTIONS $TARGETS -oA scan-$date > /dev/null
if [ -e scan-prev.xml ]; then


        ndiff scan-prev.xml scan-$date.xml > diff-$date


        echo "*** NDIFF RESULTS ***"


        cat diff-$date


        echo
fi
echo "*** NMAP RESULTS ***"
cat scan-$date.nmap
ln -sf scan-$date.xml scan-prev.xml

If the script is saved as /root/scan-ndiff.sh, add the following line to root´s crontab:

0 12 * * * /root/scan-ndiff.sh

EXIT CODE¶

The exit code indicates whether the scans are equal.

BUGS¶

Report bugs to the nmap-dev mailing list at nmap-dev@insecure.org.

HISTORY¶

Ndiff started as a project by Michael Pattrick during the 2008 Google Summer of Code. Michael designed the program and led the discussion of its output formats. He wrote versions of the program in Perl and C++, but the summer ended shortly after it was decided to rewrite the program in Python for the sake of Windows (and Zenmap) compatibility. This Python version was written by David Fifield. James Levine released[1] a Perl script named Ndiff with similar functionality in 2000.

AUTHORS¶

David Fifield david@bamsoftware.com

Michael Pattrick mpattrick@rhinovirus.org

WEB SITE¶

http://nmap.org/ndiff/

NOTES¶

1.

released