NAME¶

Perl::Critic::Config - The final derived Perl::Critic configuration, combined from any profile file and command-line parameters.

DESCRIPTION¶

Perl::Critic::Config takes care of finding and processing user-preferences for Perl::Critic. The Config object defines which Policy modules will be loaded into the Perl::Critic engine and how they should be configured. You should never really need to instantiate Perl::Critic::Config directly because the Perl::Critic constructor will do it for you.

INTERFACE SUPPORT¶

This is considered to be a non-public class. Its interface is subject to change without notice.

CONSTRUCTOR¶

"new( [ -profile => $FILE, -severity => $N, -theme => $string, -include => \@PATTERNS, -exclude => \@PATTERNS, -single-policy => $PATTERN, -top => $N, -only => $B, -profile-strictness => $PROFILE_STRICTNESS_{WARN|FATAL|QUIET}, -force => $B, -verbose => $N, -color => $B, -criticism-fatal => $B] )"

"new()"

Returns a reference to a new Perl::Critic::Config object. The default value for all arguments can be defined in your .perlcriticrc file. See the "CONFIGURATION" section for more information about that. All arguments are optional key-value pairs as follows:

-profile is a path to a configuration file. If $FILE is not defined, Perl::Critic::Config attempts to find a .perlcriticrc configuration file in the current directory, and then in your home directory. Alternatively, you can set the "PERLCRITIC" environment variable to point to a file in another location. If a configuration file can't be found, or if $FILE is an empty string, then all Policies will be loaded with their default configuration. See "CONFIGURATION" for more information.

-severity is the minimum severity level. Only Policy modules that have a severity greater than $N will be loaded into this Config. Severity values are integers ranging from 1 (least severe) to 5 (most severe). The default is 5. For a given "-profile", decreasing the "-severity" will usually result in more Policy violations. Users can redefine the severity level for any Policy in their .perlcriticrc file. See "CONFIGURATION" for more information.

-theme is special string that defines a set of Policies based on their respective themes. If "-theme" is given, only policies that are members of that set will be loaded. See the "POLICY THEMES" section for more information about themes. Unless the "-severity" option is explicitly given, setting "-theme" causes the "-severity" to be set to 1.

-include is a reference to a list of string @PATTERNS. Policies that match at least one "m/$PATTERN/ixms" will be loaded into this Config, irrespective of the severity settings. You can use it in conjunction with the "-exclude" option. Note that "-exclude" takes precedence over "-include" when a Policy matches both patterns.

-exclude is a reference to a list of string @PATTERNS. Polices that match at least one "m/$PATTERN/ixms" will not be loaded into this Config, irrespective of the severity settings. You can use it in conjunction with the "-include" option. Note that "-exclude" takes precedence over "-include" when a Policy matches both patterns.

-single-policy is a string "PATTERN". Only the policy that matches "m/$PATTERN/ixms" will be used. This value overrides the "-severity", "-theme", "-include", "-exclude", and "-only" options.

-top is the maximum number of Violations to return when ranked by their severity levels. This must be a positive integer. Violations are still returned in the order that they occur within the file. Unless the "-severity" option is explicitly given, setting "-top" silently causes the "-severity" to be set to 1.

-only is a boolean value. If set to a true value, Perl::Critic will only choose from Policies that are mentioned in the user's profile. If set to a false value (which is the default), then Perl::Critic chooses from all the Policies that it finds at your site.

-profile-strictness is an enumerated value, one of "$PROFILE_STRICTNESS_WARN" in Perl::Critic::Utils::Constants (the default), "$PROFILE_STRICTNESS_FATAL" in Perl::Critic::Utils::Constants, and "$PROFILE_STRICTNESS_QUIET" in Perl::Critic::Utils::Constants. If set to "$PROFILE_STRICTNESS_FATAL" in Perl::Critic::Utils::Constants, Perl::Critic will make certain warnings about problems found in a .perlcriticrc or file specified via the -profile option fatal. For example, Perl::Critic normally only "warn"s about profiles referring to non-existent Policies, but this value makes this situation fatal. Correspondingly, "$PROFILE_STRICTNESS_QUIET" in Perl::Critic::Utils::Constants makes Perl::Critic shut up about these things.

-force controls whether Perl::Critic observes the magical "## no critic" annotations in your code. If set to a true value, Perl::Critic will analyze all code. If set to a false value (which is the default) Perl::Critic will ignore code that is tagged with these comments. See "BENDING THE RULES" in Perl::Critic for more information.

-verbose can be a positive integer (from 1 to 10), or a literal format specification. See Perl::Critic::Violations for an explanation of format specifications.

-color and -pager are not used by Perl::Critic but is provided for the benefit of perlcritic.

-criticism-fatal is not used by Perl::Critic but is provided for the benefit of criticism.

-color-severity-highest is a string representing the highest severity violation color, as expected by Term::ANSIColor. It is not used by Perl::Critic, but is provided for the benefit of perlcritic. It can also be specified as -colour-severity-highest, -color-severity-5, or -colour-severity-5.

-color-severity-high is a string representing the high severity violation color, as expected by Term::ANSIColor. It is not used by Perl::Critic, but is provided for the benefit of perlcritic. It can also be specified as -colour-severity-high, -color-severity-4, or -colour-severity-4.

-color-severity-medium is a string representing the medium severity violation color, as expected by Term::ANSIColor. It is not used by Perl::Critic, but is provided for the benefit of perlcritic. It can also be specified as -colour-severity-medium, -color-severity-3, or -colour-severity-3.

-color-severity-low is a string representing the low severity violation color, as expected by Term::ANSIColor. It is not used by Perl::Critic, but is provided for the benefit of perlcritic. It can also be specified as -colour-severity-low, -color-severity-2, or -colour-severity-2.

-color-severity-lowest is a string representing the lowest severity violation color, as expected by Term::ANSIColor. It is not used by Perl::Critic, but is provided for the benefit of perlcritic. It can also be specified as -colour-severity-lowest, -color-severity-1, or -colour-severity-1.

METHODS¶

"add_policy( -policy => $policy_name, -params => \%param_hash )"

Creates a Policy object and loads it into this Config. If the object cannot be instantiated, it will throw a fatal exception. Otherwise, it returns a reference to this Critic.

-policy is the name of a Perl::Critic::Policy subclass module. The 'Perl::Critic::Policy' portion of the name can be omitted for brevity. This argument is required.

-params is an optional reference to a hash of Policy parameters. The contents of this hash reference will be passed into to the constructor of the Policy module. See the documentation in the relevant Policy module for a description of the arguments it supports.

" all_policies_enabled_or_not() "

Returns a list containing references to all the Policy objects that have been seen. Note that the state of these objects is not trustworthy. In particular, it is likely that some of them are not prepared to examine any documents.

" policies() "

Returns a list containing references to all the Policy objects that have been enabled and loaded into this Config.

" exclude() "

Returns the value of the "-exclude" attribute for this Config.

" include() "

Returns the value of the "-include" attribute for this Config.

" force() "

Returns the value of the "-force" attribute for this Config.

" only() "

Returns the value of the "-only" attribute for this Config.

" profile_strictness() "

Returns the value of the "-profile-strictness" attribute for this Config.

" severity() "

Returns the value of the "-severity" attribute for this Config.

" single_policy() "

Returns the value of the "-single-policy" attribute for this Config.

" theme() "

Returns the Perl::Critic::Theme object that was created for this Config.

" top() "

Returns the value of the "-top" attribute for this Config.

" verbose() "

Returns the value of the "-verbose" attribute for this Config.

" color() "

Returns the value of the "-color" attribute for this Config.

" pager() "

Returns the value of the "-pager" attribute for this Config.

" criticism_fatal() "

Returns the value of the "-criticsm-fatal" attribute for this Config.

" color_severity_highest() "

Returns the value of the "-color-severity-highest" attribute for this Config.

" color_severity_high() "

Returns the value of the "-color-severity-high" attribute for this Config.

" color_severity_medium() "

Returns the value of the "-color-severity-medium" attribute for this Config.

" color_severity_low() "

Returns the value of the "-color-severity-low" attribute for this Config.

" color_severity_lowest() "

Returns the value of the "-color-severity-lowest" attribute for this Config.

SUBROUTINES¶

Perl::Critic::Config has a few static subroutines that are used internally, but may be useful to you in some way.

"site_policy_names()"

Returns a list of all the Policy modules that are currently installed in the Perl::Critic:Policy namespace. These will include modules that are distributed with Perl::Critic plus any third-party modules that have been installed.

CONFIGURATION¶

Most of the settings for Perl::Critic and each of the Policy modules can be controlled by a configuration file. The default configuration file is called .perlcriticrc. Perl::Critic::Config will look for this file in the current directory first, and then in your home directory. Alternatively, you can set the "PERLCRITIC" environment variable to explicitly point to a different file in another location. If none of these files exist, and the "-profile" option is not given to the constructor, then all Policies will be loaded with their default configuration.

The format of the configuration file is a series of INI-style blocks that contain key-value pairs separated by '='. Comments should start with '#' and can be placed on a separate line or after the name-value pairs if you desire.

Default settings for Perl::Critic itself can be set before the first named block. For example, putting any or all of these at the top of your configuration file will set the default value for the corresponding Perl::Critic constructor argument.

    severity  = 3                                     #Integer from 1 to 5
    only      = 1                                     #Zero or One
    force     = 0                                     #Zero or One
    verbose   = 4                                     #Integer or format spec
    top       = 50                                    #A positive integer
    theme     = risky + (pbp * security) - cosmetic   #A theme expression
    include   = NamingConventions ClassHierarchies    #Space-delimited list
    exclude   = Variables  Modules::RequirePackage    #Space-delimited list
    color     = 1                                     #Zero or One
    color-severity-highest = bold red                 #Term::ANSIColor
    color-severity-high = magenta                     #Term::ANSIColor
    color-severity-medium =                           #no coloring
    color-severity-low =                              #no coloring
    color-severity-lowest =                           #no coloring

The remainder of the configuration file is a series of blocks like this:

    [Perl::Critic::Policy::Category::PolicyName]
    severity = 1
    set_themes = foo bar
    add_themes = baz
    arg1 = value1
    arg2 = value2

"Perl::Critic::Policy::Category::PolicyName" is the full name of a module that implements the policy. The Policy modules distributed with Perl::Critic have been grouped into categories according to the table of contents in Damian Conway's book Perl Best Practices. For brevity, you can omit the 'Perl::Critic::Policy' part of the module name.

"severity" is the level of importance you wish to assign to the Policy. All Policy modules are defined with a default severity value ranging from 1 (least severe) to 5 (most severe). However, you may disagree with the default severity and choose to give it a higher or lower severity, based on your own coding philosophy.

The remaining key-value pairs are configuration parameters that will be passed into the constructor of that Policy. The constructors for most Policy modules do not support arguments, and those that do should have reasonable defaults. See the documentation on the appropriate Policy module for more details.

Instead of redefining the severity for a given Policy, you can completely disable a Policy by prepending a '-' to the name of the module in your configuration file. In this manner, the Policy will never be loaded, regardless of the "-severity" given to the Perl::Critic::Config constructor.

A simple configuration might look like this:

    #--------------------------------------------------------------
    # I think these are really important, so always load them
    [TestingAndDebugging::RequireUseStrict]
    severity = 5
    [TestingAndDebugging::RequireUseWarnings]
    severity = 5
    #--------------------------------------------------------------
    # I think these are less important, so only load when asked
    [Variables::ProhibitPackageVars]
    severity = 2
    [ControlStructures::ProhibitPostfixControls]
    allow = if unless  #My custom configuration
    severity = 2
    #--------------------------------------------------------------
    # Give these policies a custom theme.  I can activate just
    # these policies by saying (-theme => 'larry + curly')
    [Modules::RequireFilenameMatchesPackage]
    add_themes = larry
    [TestingAndDebugging::RequireTestLables]
    add_themes = curly moe
    #--------------------------------------------------------------
    # I do not agree with these at all, so never load them
    [-NamingConventions::Capitalization]
    [-ValuesAndExpressions::ProhibitMagicNumbers]
    #--------------------------------------------------------------
    # For all other Policies, I accept the default severity, theme
    # and other parameters, so no additional configuration is
    # required for them.

For additional configuration examples, see the perlcriticrc file that is included in this t/examples directory of this distribution.

THE POLICIES¶

A large number of Policy modules are distributed with Perl::Critic. They are described briefly in the companion document Perl::Critic::PolicySummary and in more detail in the individual modules themselves.

POLICY THEMES¶

Each Policy is defined with one or more "themes". Themes can be used to create arbitrary groups of Policies. They are intended to provide an alternative mechanism for selecting your preferred set of Policies. For example, you may wish disable a certain subset of Policies when analyzing test scripts. Conversely, you may wish to enable only a specific subset of Policies when analyzing modules.

The Policies that ship with Perl::Critic are have been broken into the following themes. This is just our attempt to provide some basic logical groupings. You are free to invent new themes that suit your needs.

    THEME             DESCRIPTION
    --------------------------------------------------------------------------
    core              All policies that ship with Perl::Critic
    pbp               Policies that come directly from "Perl Best Practices"
    bugs              Policies that that prevent or reveal bugs
    maintenance       Policies that affect the long-term health of the code
    cosmetic          Policies that only have a superficial effect
    complexity        Policies that specificaly relate to code complexity
    security          Policies that relate to security issues
    tests             Policies that are specific to test scripts

Say "`perlcritic -list`" to get a listing of all available policies and the themes that are associated with each one. You can also change the theme for any Policy in your .perlcriticrc file. See the "CONFIGURATION" section for more information about that.

Using the "-theme" option, you can combine theme names with mathematical and boolean operators to create an arbitrarily complex expression that represents a custom "set" of Policies. The following operators are supported

   Operator       Alternative         Meaning
   ----------------------------------------------------------------------------
   *              and                 Intersection
   -              not                 Difference
   +              or                  Union

Operator precedence is the same as that of normal mathematics. You can also use parenthesis to enforce precedence. Here are some examples:

   Expression                  Meaning
   ----------------------------------------------------------------------------
   pbp * bugs                  All policies that are "pbp" AND "bugs"
   pbp and bugs                Ditto
   bugs + cosmetic             All policies that are "bugs" OR "cosmetic"
   bugs or cosmetic            Ditto
   pbp - cosmetic              All policies that are "pbp" BUT NOT "cosmetic"
   pbp not cosmetic            Ditto
   -maintenance                All policies that are NOT "maintenance"
   not maintenance             Ditto
   (pbp - bugs) * complexity     All policies that are "pbp" BUT NOT "bugs",
                                    AND "complexity"
   (pbp not bugs) and complexity  Ditto

Theme names are case-insensitive. If "-theme" is set to an empty string, then it is equivalent to the set of all Policies. A theme name that doesn't exist is equivalent to an empty set. Please See <http://en.wikipedia.org/wiki/Set> for a discussion on set theory.

SEE ALSO¶

Perl::Critic::OptionsProcessor, Perl::Critic::UserProfile

AUTHOR¶

Jeffrey Ryan Thalhammer <thaljef@cpan.org>

COPYRIGHT¶

Copyright (c) 2005-2009 Jeffrey Ryan Thalhammer. All rights reserved.

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. The full text of this license can be found in the LICENSE file included with this module.