Scroll to navigation

stunnel_selinux(8) SELinux Policy stunnel stunnel_selinux(8)

NAME

stunnel_selinux - Security Enhanced Linux Policy for the stunnel processes

DESCRIPTION

Security-Enhanced Linux secures the stunnel processes via flexible mandatory access control.

The stunnel processes execute with the stunnel_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep stunnel_t

ENTRYPOINTS

The stunnel_t SELinux type can be entered via the stunnel_exec_t file type.

The default entrypoint paths for the stunnel_t domain are the following:

/usr/bin/stunnel, /usr/sbin/stunnel

PROCESS TYPES

SELinux defines process types (domains) for each process running on the system

You can see the context of a process using the -Z option to ps

Policy governs the access confined processes have to files. SELinux stunnel policy is very flexible allowing users to setup their stunnel processes in as secure a method as possible.

The following process types are defined for stunnel:

stunnel_t

Note: semanage permissive -a stunnel_t can be used to make the process type stunnel_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

BOOLEANS

SELinux policy is customizable based on least access required. stunnel policy is extremely flexible and has several booleans that allow you to manipulate the policy and run stunnel with the tightest access possible.

If you want to allow all domains to use other domains file descriptors, you must turn on the allow_domain_fd_use boolean. Enabled by default.

setsebool -P allow_domain_fd_use 1

If you want to allow confined applications to run with kerberos, you must turn on the allow_kerberos boolean. Enabled by default.

setsebool -P allow_kerberos 1

If you want to allow sysadm to debug or ptrace all processes, you must turn on the allow_ptrace boolean. Disabled by default.

setsebool -P allow_ptrace 1

If you want to allow system to run with NIS, you must turn on the allow_ypbind boolean. Disabled by default.

setsebool -P allow_ypbind 1

If you want to allow all domains to have the kernel load modules, you must turn on the domain_kernel_load_modules boolean. Disabled by default.

setsebool -P domain_kernel_load_modules 1

If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

setsebool -P fips_mode 1

If you want to enable reading of urandom for all domains, you must turn on the global_ssp boolean. Disabled by default.

setsebool -P global_ssp 1

If you want to allow confined applications to use nscd shared memory, you must turn on the nscd_use_shm boolean. Enabled by default.

setsebool -P nscd_use_shm 1

PORT TYPES

SELinux defines port types to represent TCP and UDP ports.

You can see the types associated with a port by using the following command:

semanage port -l

Policy governs the access confined processes have to these ports. SELinux stunnel policy is very flexible allowing users to setup their stunnel processes in as secure a method as possible.

The following port types are defined for stunnel:


MANAGED FILES

The SELinux process type stunnel_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.

initrc_tmp_t

mnt_t

/mnt(/[^/]*)
/mnt(/[^/]*)?
/rhev(/[^/]*)?
/media(/[^/]*)
/media(/[^/]*)?
/etc/rhgb(/.*)?
/media/.hal-.*
/net
/afs
/rhev
/misc

stunnel_tmp_t

stunnel_var_run_t

/var/run/stunnel(/.*)?

tmp_t

/tmp
/usr/tmp
/var/tmp
/tmp-inst
/var/tmp-inst
/var/tmp/vi.recover

FILE CONTEXTS

SELinux requires files to have an extended attribute to define the file type.

You can see the context of a file using the -Z option to ls

Policy governs the access confined processes have to these files. SELinux stunnel policy is very flexible allowing users to setup their stunnel processes in as secure a method as possible.

STANDARD FILE CONTEXT

SELinux defines the file context types for the stunnel, if you wanted to store files with these types in a diffent paths, you need to execute the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk.

semanage fcontext -a -t stunnel_var_run_t '/srv/mystunnel_content(/.*)?'
restorecon -R -v /srv/mystunnel_content

Note: SELinux often uses regular expressions to specify labels that match multiple files.

The following file types are defined for stunnel:

stunnel_etc_t

- Set files with the stunnel_etc_t type, if you want to store stunnel files in the /etc directories.

stunnel_exec_t

- Set files with the stunnel_exec_t type, if you want to transition an executable to the stunnel_t domain.

/usr/bin/stunnel, /usr/sbin/stunnel

stunnel_tmp_t

- Set files with the stunnel_tmp_t type, if you want to store stunnel temporary files in the /tmp directories.

stunnel_var_run_t

- Set files with the stunnel_var_run_t type, if you want to store the stunnel files under the /run or /var/run directory.

Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.

COMMANDS

semanage fcontext can also be used to manipulate default file context mappings.

semanage permissive can also be used to manipulate whether or not a process type is permissive.

semanage module can also be used to enable/disable/install/remove policy modules.

semanage port can also be used to manipulate the port definitions

semanage boolean can also be used to manipulate the booleans

system-config-selinux is a GUI tool available to customize SELinux policy settings.

AUTHOR

This manual page was auto-generated using sepolicy manpage .

SEE ALSO

selinux(8), stunnel(8), semanage(8), restorecon(8), chcon(1) , setsebool(8)

15-06-03 stunnel