Scroll to navigation

ZSHZLE(1) General Commands Manual ZSHZLE(1)

NAME

zshzle - zsh command line editor

DESCRIPTION

If the ZLE option is set (which it is by default in interactive shells) and the shell input is attached to the terminal, the user is able to edit command lines.

There are two display modes. The first, multiline mode, is the default. It only works if the TERM parameter is set to a valid terminal type that can move the cursor up. The second, single line mode, is used if TERM is invalid or incapable of moving the cursor up, or if the SINGLE_LINE_ZLE option is set. This mode is similar to ksh, and uses no termcap sequences. If TERM is "emacs", the ZLE option will be unset by default.

The parameters BAUD, COLUMNS, and LINES are also used by the line editor. See Parameters Used By The Shell in zshparam(1).

The parameter zle_highlight is also used by the line editor; see Character Highlighting below. Highlighting of special characters and the region between the cursor and the mark (as set with set-mark-command in Emacs mode) is enabled by default; consult this reference for more information. Irascible conservatives will wish to know that all highlighting may be disabled by the following setting:

zle_highlight=(none)

KEYMAPS

A keymap in ZLE contains a set of bindings between key sequences and ZLE commands. The empty key sequence cannot be bound.

There can be any number of keymaps at any time, and each keymap has one or more names. If all of a keymap's names are deleted, it disappears. bindkey can be used to manipulate keymap names.

Initially, there are six keymaps:

EMACS emulation
vi emulation - insert mode
vi emulation - command mode
incremental search mode
read a command name
.safe
fallback keymap

The `.safe' keymap is special. It can never be altered, and the name can never be removed. However, it can be linked to other names, which can be removed. In the future other special keymaps may be added; users should avoid using names beginning with `.' for their own keymaps.

In addition to these names, either `emacs' or `viins' is also linked to the name `main'. If one of the VISUAL or EDITOR environment variables contain the string `vi' when the shell starts up then it will be `viins', otherwise it will be `emacs'. bindkey's -e and -v options provide a convenient way to override this default choice.

When the editor starts up, it will select the `main' keymap. If that keymap doesn't exist, it will use `.safe' instead.

In the `.safe' keymap, each single key is bound to self-insert, except for ^J (line feed) and ^M (return) which are bound to accept-line. This is deliberately not pleasant to use; if you are using it, it means you deleted the main keymap, and you should put it back.

Reading Commands

When ZLE is reading a command from the terminal, it may read a sequence that is bound to some command and is also a prefix of a longer bound string. In this case ZLE will wait a certain time to see if more characters are typed, and if not (or they don't match any longer string) it will execute the binding. This timeout is defined by the KEYTIMEOUT parameter; its default is 0.4 sec. There is no timeout if the prefix string is not itself bound to a command.

The key timeout is also applied when ZLE is reading the bytes from a multibyte character string when it is in the appropriate mode. (This requires that the shell was compiled with multibyte mode enabled; typically also the locale has characters with the UTF-8 encoding, although any multibyte encoding known to the operating system is supported.) If the second or a subsequent byte is not read within the timeout period, the shell acts as if ? were typed and resets the input state.

As well as ZLE commands, key sequences can be bound to other strings, by using `bindkey -s'. When such a sequence is read, the replacement string is pushed back as input, and the command reading process starts again using these fake keystrokes. This input can itself invoke further replacement strings, but in order to detect loops the process will be stopped if there are twenty such replacements without a real command being read.

A key sequence typed by the user can be turned into a command name for use in user-defined widgets with the read-command widget, described below.

ZLE BUILTINS

The ZLE module contains three related builtin commands. The bindkey command manipulates keymaps and key bindings; the vared command invokes ZLE on the value of a shell parameter; and the zle command manipulates editing widgets and allows command line access to ZLE commands from within shell functions.

bindkey [ options ] -l [ -L ] [ keymap ... ]
bindkey [ options ] -d
bindkey [ options ] -D keymap ...
bindkey [ options ] -A old-keymap new-keymap
bindkey [ options ] -N new-keymap [ old-keymap ]
bindkey [ options ] -m
bindkey [ options ] -r in-string ...
bindkey [ options ] -s in-string out-string ...
bindkey [ options ] in-string command ...
bindkey [ options ] [ in-string ]
bindkey's options can be divided into three categories: keymap selection for the current command, operation selection, and others. The keymap selection options are:

-e
Selects keymap `emacs' for any operations by the current command, and also links `emacs' to `main' so that it is selected by default the next time the editor starts.
Selects keymap `viins' for any operations by the current command, and also links `viins' to `main' so that it is selected by default the next time the editor starts.
Selects keymap `vicmd' for any operations by the current command.
The keymap specifies a keymap name that is selected for any operations by the current command.

If a keymap selection is required and none of the options above are used, the `main' keymap is used. Some operations do not permit a keymap to be selected, namely:

-l
List all existing keymap names; if any arguments are given, list just those keymaps.

If the -L option is also used, list in the form of bindkey commands to create or link the keymaps. `bindkey -lL main' shows which keymap is linked to `main', if any, and hence if the standard emacs or vi emulation is in effect. This option does not show the .safe keymap because it cannot be created in that fashion; however, neither is `bindkey -lL .safe' reported as an error, it simply outputs nothing.

Delete all existing keymaps and reset to the default state.
Delete the named keymaps.
Make the new-keymap name an alias for old-keymap, so that both names refer to the same keymap. The names have equal standing; if either is deleted, the other remains. If there is already a keymap with the new-keymap name, it is deleted.
Create a new keymap, named new-keymap. If a keymap already has that name, it is deleted. If an old-keymap name is given, the new keymap is initialized to be a duplicate of it, otherwise the new keymap will be empty.

To use a newly created keymap, it should be linked to main. Hence the sequence of commands to create and use a new keymap `mymap' initialized from the emacs keymap (which remains unchanged) is:

bindkey -N mymap emacs
bindkey -A mymap main

Note that while `bindkey -A newmap main' will work when newmap is emacs or viins, it will not work for vicmd, as switching from vi insert to command mode becomes impossible.

The following operations act on the `main' keymap if no keymap selection option was given:

-m
Add the built-in set of meta-key bindings to the selected keymap. Only keys that are unbound or bound to self-insert are affected.
Unbind the specified in-strings in the selected keymap. This is exactly equivalent to binding the strings to undefined-key.

When -R is also used, interpret the in-strings as ranges.

When -p is also used, the in-strings specify prefixes. Any binding that has the given in-string as a prefix, not including the binding for the in-string itself, if any, will be removed. For example,

bindkey -rpM viins '^['

will remove all bindings in the vi-insert keymap beginning with an escape character (probably cursor keys), but leave the binding for the escape character itself (probably vi-cmd-mode). This is incompatible with the option -R.

Bind each in-string to each out-string. When in-string is typed, out-string will be pushed back and treated as input to the line editor. When -R is also used, interpret the in-strings as ranges.
Bind each in-string to each command. When -R is used, interpret the in-strings as ranges.
[ in-string ]
List key bindings. If an in-string is specified, the binding of that string in the selected keymap is displayed. Otherwise, all key bindings in the selected keymap are displayed. (As a special case, if the -e or -v option is used alone, the keymap is not displayed - the implicit linking of keymaps is the only thing that happens.)

When the option -p is used, the in-string must be present. The listing shows all bindings which have the given key sequence as a prefix, not including any bindings for the key sequence itself.

When the -L option is used, the list is in the form of bindkey commands to create the key bindings.

When the -R option is used as noted above, a valid range consists of two characters, with an optional `-' between them. All characters between the two specified, inclusive, are bound as specified.

For either in-string or out-string, the following escape sequences are recognised:

bell character
backspace
escape
form feed
linefeed (newline)
carriage return
horizontal tab
vertical tab
character code in octal
character code in hexadecimal
character with meta bit set
control character
^X
control character

In all other cases, `\' escapes the following character. Delete is written as `^?'. Note that `\M^?' and `^\M?' are not the same, and that (unlike emacs), the bindings `\M-X' and `\eX' are entirely distinct, although they are initialized to the same bindings by `bindkey -m'.

vared [ -Aache ] [ -p prompt ] [ -r rprompt ]

[ -M main-keymap ] [ -m vicmd-keymap ]

[ -t tty ] name
The value of the parameter name is loaded into the edit buffer, and the line editor is invoked. When the editor exits, name is set to the string value returned by the editor. When the -c flag is given, the parameter is created if it doesn't already exist. The -a flag may be given with -c to create an array parameter, or the -A flag to create an associative array. If the type of an existing parameter does not match the type to be created, the parameter is unset and recreated.

If an array or array slice is being edited, separator characters as defined in $IFS will be shown quoted with a backslash, as will backslashes themselves. Conversely, when the edited text is split into an array, a backslash quotes an immediately following separator character or backslash; no other special handling of backslashes, or any handling of quotes, is performed.

Individual elements of existing array or associative array parameters may be edited by using subscript syntax on name. New elements are created automatically, even without -c.

If the -p flag is given, the following string will be taken as the prompt to display at the left. If the -r flag is given, the following string gives the prompt to display at the right. If the -h flag is specified, the history can be accessed from ZLE. If the -e flag is given, typing ^D (Control-D) on an empty line causes vared to exit immediately with a non-zero return value.

The -M option gives a keymap to link to the main keymap during editing, and the -m option gives a keymap to link to the vicmd keymap during editing. For vi-style editing, this allows a pair of keymaps to override viins and vicmd. For emacs-style editing, only -M is normally needed but the -m option may still be used. On exit, the previous keymaps will be restored.

If `-t tty' is given, tty is the name of a terminal device to be used instead of the default /dev/tty. If tty does not refer to a terminal an error is reported.

zle
zle -l [ -L | -a ] [ string ... ]
zle -D widget ...
zle -A old-widget new-widget
zle -N widget [ function ]
zle -C widget completion-widget function
zle -R [ -c ] [ display-string ] [ string ... ]
zle -M string
zle -U string
zle -K keymap
zle -F [ -L ] [ fd [ handler ] ]
zle -I
zle widget [ -n num ] [ -Nw ] [ -K keymap ] args ...
The zle builtin performs a number of different actions concerning ZLE.

With no options and no arguments, only the return status will be set. It is zero if ZLE is currently active and widgets could be invoked using this builtin command and non-zero otherwise. Note that even if non-zero status is returned, zle may still be active as part of the completion system; this does not allow direct calls to ZLE widgets.

Otherwise, which operation it performs depends on its options:

-l [ -L | -a ]
List all existing user-defined widgets. If the -L option is used, list in the form of zle commands to create the widgets.

When combined with the -a option, all widget names are listed, including the builtin ones. In this case the -L option is ignored.

If at least one string is given, nothing will be printed but the return status will be zero if all strings are names of existing widgets (or of user-defined widgets if the -a flag is not given) and non-zero if at least one string is not a name of an defined widget.

Delete the named widgets.
Make the new-widget name an alias for old-widget, so that both names refer to the same widget. The names have equal standing; if either is deleted, the other remains. If there is already a widget with the new-widget name, it is deleted.
Create a user-defined widget. If there is already a widget with the specified name, it is overwritten. When the new widget is invoked from within the editor, the specified shell function is called. If no function name is specified, it defaults to the same name as the widget. For further information, see the section Widgets in zshzle(1).
Create a user-defined completion widget named widget. The completion widget will behave like the built-in completion-widget whose name is given as completion-widget. To generate the completions, the shell function function will be called. For further information, see zshcompwid(1).
Redisplay the command line; this is to be called from within a user-defined widget to allow changes to become visible. If a display-string is given and not empty, this is shown in the status line (immediately below the line being edited).

If the optional strings are given they are listed below the prompt in the same way as completion lists are printed. If no strings are given but the -c option is used such a list is cleared.

Note that this option is only useful for widgets that do not exit immediately after using it because the strings displayed will be erased immediately after return from the widget.

This command can safely be called outside user defined widgets; if zle is active, the display will be refreshed, while if zle is not active, the command has no effect. In this case there will usually be no other arguments.

The status is zero if zle was active, else one.

As with the -R option, the string will be displayed below the command line; unlike the -R option, the string will not be put into the status line but will instead be printed normally below the prompt. This means that the string will still be displayed after the widget returns (until it is overwritten by subsequent commands).
This pushes the characters in the string onto the input stack of ZLE. After the widget currently executed finishes ZLE will behave as if the characters in the string were typed by the user.

As ZLE uses a stack, if this option is used repeatedly the last string pushed onto the stack will be processed first. However, the characters in each string will be processed in the order in which they appear in the string.

Selects the keymap named keymap. An error message will be displayed if there is no such keymap.

This keymap selection affects the interpretation of following keystrokes within this invocation of ZLE. Any following invocation (e.g., the next command line) will start as usual with the `main' keymap selected.

Only available if your system supports one of the `poll' or `select' system calls; most modern systems do.

Installs handler (the name of a shell function) to handle input from file descriptor fd. When zle is attempting to read data, it will examine both the terminal and the list of handled fd's. If data becomes available on a handled fd, zle will call handler with the fd which is ready for reading as the only argument. If the handler produces output to the terminal, it should call `zle -I' before doing so (see below). The handler should not attempt to read from the terminal. Note that zle makes no attempt to check whether this fd is actually readable when installing the handler. The user must make their own arrangements for handling the file descriptor when zle is not active.

Any number of handlers for any number of readable file descriptors may be installed. Installing a handler for an fd which is already handled causes the existing handler to be replaced.

If no handler is given, but an fd is present, any handler for that fd is removed. If there is none, an error message is printed and status 1 is returned.

If no arguments are given, or the -L option is supplied, a list of handlers is printed in a form which can be stored for later execution.

An fd (but not a handler) may optionally be given with the -L option; in this case, the function will list the handler if any, else silently return status 1.

Note that this feature should be used with care. Activity on one of the fd's which is not properly handled can cause the terminal to become unusable.

Here is a simple example of using this feature. A connection to a remote TCP port is created using the ztcp command; see the description of the zsh/net/tcp module in zshmodules(1). Then a handler is installed which simply prints out any data which arrives on this connection. Note that `select' will indicate that the file descriptor needs handling if the remote side has closed the connection; we handle that by testing for a failed read.

if ztcp pwspc 2811; then

tcpfd=$REPLY
handler() {
zle -I
local line
if ! read -r line <&$1; then
# select marks this fd if we reach EOF,
# so handle this specially.
print "[Read on fd $1 failed, removing.]" >&2
zle -F $1
return 1
fi
print -r - $line
}
zle -F $tcpfd handler fi
Unusually, this option is most useful outside ordinary widget functions, though it may be used within if normal output to the terminal is required. It invalidates the current zle display in preparation for output; typically this will be from a trap function. It has no effect if zle is not active. When a trap exits, the shell checks to see if the display needs restoring, hence the following will print output in such a way as not to disturb the line being edited:

TRAPUSR1() {

# Invalidate zle display
[[ -o zle ]] && zle -I
# Show output
print Hello }

In general, the trap function may need to test whether zle is active before using this method (as shown in the example), since the zsh/zle module may not even be loaded; if it is not, the command can be skipped.

It is possible to call `zle -I' several times before control is returned to the editor; the display will only be invalidated the first time to minimise disruption.

Note that there are normally better ways of manipulating the display from within zle widgets; see, for example, `zle -R' above.

The returned status is zero if zle was invalidated, even though this may have been by a previous call to `zle -I' or by a system notification. To test if a zle widget may be called at this point, execute zle with no arguments and examine the return status.

Invoke the specified widget. This can only be done when ZLE is active; normally this will be within a user-defined widget.

With the options -n and -N, the current numerical argument will be saved and then restored after the call to widget; `-n num' sets the numerical argument temporarily to num, while `-N' sets it to the default, i.e. as if there were none.

With the option -K, keymap will be used as the current keymap during the execution of the widget. The previous keymap will be restored when the widget exits.

Normally, calling a widget in this way does not set the special parameter WIDGET and related parameters, so that the environment appears as if the top-level widget called by the user were still active. With the option -w, WIDGET and related parameters are set to reflect the widget being executed by the zle call.

Any further arguments will be passed to the widget; note that as standard argument handling is performed, any general argument list should be preceded by --. If it is a shell function, these are passed down as positional parameters; for builtin widgets it is up to the widget in question what it does with them. Currently arguments are only handled by the incremental-search commands, the history-search-forward and -backward and the corresponding functions prefixed by vi-, and by universal-argument. No error is flagged if the command does not use the arguments, or only uses some of them.

The return status reflects the success or failure of the operation carried out by the widget, or if it is a user-defined widget the return status of the shell function.

A non-zero return status causes the shell to beep when the widget exits, unless the BEEP options was unset or the widget was called via the zle command. Thus if a user defined widget requires an immediate beep, it should call the beep widget directly.

WIDGETS

All actions in the editor are performed by `widgets'. A widget's job is simply to perform some small action. The ZLE commands that key sequences in keymaps are bound to are in fact widgets. Widgets can be user-defined or built in.

The standard widgets built into ZLE are listed in Standard Widgets below. Other built-in widgets can be defined by other modules (see zshmodules(1)). Each built-in widget has two names: its normal canonical name, and the same name preceded by a `.'. The `.' name is special: it can't be rebound to a different widget. This makes the widget available even when its usual name has been redefined.

User-defined widgets are defined using `zle -N', and implemented as shell functions. When the widget is executed, the corresponding shell function is executed, and can perform editing (or other) actions. It is recommended that user-defined widgets should not have names starting with `.'.

USER-DEFINED WIDGETS

User-defined widgets, being implemented as shell functions, can execute any normal shell command. They can also run other widgets (whether built-in or user-defined) using the zle builtin command. The standard input of the function is closed to prevent external commands from unintentionally blocking ZLE by reading from the terminal, but read -k or read -q can be used to read characters. Finally, they can examine and edit the ZLE buffer being edited by reading and setting the special parameters described below.

These special parameters are always available in widget functions, but are not in any way special outside ZLE. If they have some normal value outside ZLE, that value is temporarily inaccessible, but will return when the widget function exits. These special parameters in fact have local scope, like parameters created in a function using local.

Inside completion widgets and traps called while ZLE is active, these parameters are available read-only.

BUFFER (scalar)
The entire contents of the edit buffer. If it is written to, the cursor remains at the same offset, unless that would put it outside the buffer.
The number of screen lines needed for the edit buffer currently displayed on screen (i.e. without any changes to the preceding parameters done after the last redisplay); read-only.
The context in which zle was called to read a line; read-only. One of the values:
start
The start of a command line (at prompt PS1).
A continuation to a command line (at prompt PS2).
In a select loop.
Editing a variable in vared.

The offset of the cursor, within the edit buffer. This is in the range 0 to $#BUFFER, and is by definition equal to $#LBUFFER. Attempts to move the cursor outside the buffer will result in the cursor being moved to the appropriate end of the buffer.
The last item cut using one of the `kill-' commands; the string which the next yank would insert in the line. Later entries in the kill ring are in the array killring. Note that the command `zle copy-region-as-kill string' can be used to set the text of the cut buffer from a shell function and cycle the kill ring in the same way as interactively killing text.
The current history number. Setting this has the same effect as moving up or down in the history to the corresponding history line. An attempt to set it is ignored if the line is not stored in the history. Note this is not the same as the parameter HISTCMD, which always gives the number of the history line being added to the main shell's history. HISTNO refers to the line being retrieved within zle.
The name of the currently selected keymap; read-only.
The keys typed to invoke this widget, as a literal string; read-only.
The array of previously killed items, with the most recently killed first. This gives the items that would be retrieved by a yank-pop in the same order. Note, however, that the most recently killed item is in $CUTBUFFER; $killring shows the array of previous entries.

The default size for the kill ring is eight, however the length may be changed by normal array operations. Any empty string in the kill ring is ignored by the yank-pop command, hence the size of the array effectively sets the maximum length of the kill ring, while the number of non-zero strings gives the current length, both as seen by the user at the command line.

The last search string used by an interactive search that was aborted by the user (status 3 returned by the search widget).
The last search string used by an interactive search; read-only. This is set even if the search failed (status 0, 1 or 2 returned by the search widget), but not if it was aborted by the user.
The name of the last widget that was executed; read-only.
The part of the buffer that lies to the left of the cursor position. If it is assigned to, only that part of the buffer is replaced, and the cursor remains between the new $LBUFFER and the old $RBUFFER.
Like CURSOR, but for the mark.
The numeric argument. If no numeric argument was given, this parameter is unset. When this is set inside a widget function, builtin widgets called with the zle builtin command will use the value assigned. If it is unset inside a widget function, builtin widgets called behave as if no numeric argument was given.
The number of bytes pending for input, i.e. the number of bytes which have already been typed and can immediately be read. On systems where the shell is not able to get this information, this parameter will always have a value of zero. Read-only.
In a multi-line input at the secondary prompt, this read-only parameter contains the contents of the lines before the one the cursor is currently in.
Text to be displayed before the start of the editable text buffer. This does not have to be a complete line; to display a complete line, a newline must be appended explicitly. The text is reset on each new invocation (but not recursive invocation) of zle.
Text to be displayed after the end of the editable text buffer. This does not have to be a complete line; to display a complete line, a newline must be prepended explicitly. The text is reset on each new invocation (but not recursive invocation) of zle.
The part of the buffer that lies to the right of the cursor position. If it is assigned to, only that part of the buffer is replaced, and the cursor remains between the old $LBUFFER and the new $RBUFFER.
Indicates if the region is currently active. It can be assigned 0 or 1 to deactivate and activate the region respectively; see Character Highlighting below.
Each element of this array may be set to a string that describes highlighting for an arbitrary region of the command line that will take effect the next time the command line is redisplayed. Highlighting of the non-editable parts of the command line in PREDISPLAY and POSTDISPLAY are possible, but note that the P flag is needed for character indexing to include PREDISPLAY.

Each string consists of the following parts:

follow include any string set by the PREDISPLAY special parameter; this is needed if the predisplay string itself is to be highlighted. Whitespace may follow the `P'.
whitespace.
whitespace.
used for contexts in the parameter zle_highlight, see Character Highlighting below; for example, standout or fg=red,bold.

For example,

region_highlight=("P0 20 bold")

specifies that the first twenty characters of the text including any predisplay string should be highlighted in bold.

Note that the effect of region_highlight is not saved and disappears as soon as the line is accepted. The line editor makes no attempt to keep the highlighting effect synchronised with the line as it is edited; hence region highlighting is best limited to static effects within user widgets.

The name of the widget currently being executed; read-only.
The name of the shell function that implements a widget defined with either zle -N or zle -C. In the former case, this is the second argument to the zle -N command that defined the widget, or the first argument if there was no second argument. In the latter case this is the the third argument to the zle -C command that defined the widget. Read-only.
Describes the implementation behind the completion widget currently being executed; the second argument that followed zle -C when the widget was defined. This is the name of a builtin completion widget. For widgets defined with zle -N this is set to the empty string. Read-only.
Contains a set of space-separated words that describe the current zle state.

Currently, the only state shown is the insert mode as set by the overwrite-mode or vi-replace widgets. The string contains `insert' if characters to be inserted on the command line move existing characters to the right, `overwrite' if characters to be inserted overwrite existing characters.


Special Widgets

There are a few user-defined widgets which are special to the shell. If they do not exist, no special action is taken. The environment provided is identical to that for any other editing widget.

zle-isearch-exit
Executed at the end of incremental search at the point where the isearch prompt is removed from the display. See zle-isearch-update for an example.
Executed within incremental search when the display is about to be redrawn. Additional output below the incremental search prompt can be generated by using `zle -M' within the widget. For example,

zle-isearch-update() { zle -M "Line $HISTNO"; }
zle -N zle-isearch-update

Note the line output by `zle -M' is not deleted on exit from incremental search. This can be done from a zle-isearch-exit widget:

zle-isearch-exit() { zle -M ""; }
zle -N zle-isearch-exit
Executed every time the line editor is started to read a new line of input. The following example puts the line editor into vi command mode when it starts up.

zle-line-init() { zle -K vicmd; }
zle -N zle-line-init

(The command inside the function sets the keymap directly; it is equivalent to zle vi-cmd-mode.)

This is similar to zle-line-init but is executed every time the line editor has finished reading a line of input.
Executed every time the keymap changes, i.e. the special parameter KEYMAP is set to a different value, while the line editor is active. Initialising the keymap when the line editor starts does not cause the widget to be called.

The value $KEYMAP within the function reflects the new keymap. The old keymap is passed as the sole argument.

This can be used for detecting switches between the vi command (vicmd) and insert (usually main) keymaps.

STANDARD WIDGETS

The following is a list of all the standard widgets, and their default bindings in emacs mode, vi command mode and vi insert mode (the `emacs', `vicmd' and `viins' keymaps, respectively).

Note that cursor keys are bound to movement keys in all three keymaps; the shell assumes that the cursor keys send the key sequences reported by the terminal-handling library (termcap or terminfo). The key sequences shown in the list are those based on the VT100, common on many modern terminals, but in fact these are not necessarily bound. In the case of the viins keymap, the initial escape character of the sequences serves also to return to the vicmd keymap: whether this happens is determined by the KEYTIMEOUT parameter, see zshparam(1).

Movement

vi-backward-blank-word (unbound) (B) (unbound)
Move backward one word, where a word is defined as a series of non-blank characters.
Move backward one character.
Move backward one character, without changing lines.
Move to the beginning of the previous word.
Move to the beginning of the previous word.
Move to the beginning of the previous word, vi-style.
Move to the beginning of the line. If already at the beginning of the line, move to the beginning of the previous line, if any.
Move to the beginning of the line, without changing lines.
Move to the end of the line. If already at the end of the line, move to the end of the next line, if any.
Move to the end of the line. If an argument is given to this command, the cursor will be moved to the end of the line (argument - 1) lines down.
Move forward one word, where a word is defined as a series of non-blank characters.
Move to the end of the current word, or, if at the end of the current word, to the end of the next word, where a word is defined as a series of non-blank characters.
Move forward one character.
Move forward one character.
Read a character from the keyboard, and move to the next occurrence of it in the line.
Read a character from the keyboard, and move to the position just before the next occurrence of it in the line.
Read a character from the keyboard, and move to the previous occurrence of it in the line.
Read a character from the keyboard, and move to the position just after the previous occurrence of it in the line.
Move to the first non-blank character in the line.
Move forward one word, vi-style.
Move to the beginning of the next word. The editor's idea of a word is specified with the WORDCHARS parameter.
Move to the end of the next word.
Move to the end of the next word.
Move to the column specified by the numeric argument.
Move to the specified mark.
Move to beginning of the line containing the specified mark.
Repeat the last vi-find command.
Repeat the last vi-find command in the opposite direction.

History Control

beginning-of-buffer-or-history (ESC-<) (unbound) (unbound)
Move to the beginning of the buffer, or if already there, move to the first event in the history list.
Move to the beginning of the line. If already at the beginning of the buffer, move to the previous history line.
Move to the first event in the history list.
Move down a line in the buffer, or if already at the bottom line, move to the next event in the history list.
Move down a line in the buffer, or if already at the bottom line, move to the next event in the history list. Then move to the first non-blank character on the line.
Move down a line in the buffer, or if already at the bottom line, search forward in the history for a line beginning with the first word in the buffer.

If called from a function by the zle command with arguments, the first argument is taken as the string for which to search, rather than the first word in the buffer.

Move to the next event in the history list.
Search backward in the history for a line beginning with the current line up to the cursor. This leaves the cursor in its original position.
Move to the end of the buffer, or if already there, move to the last event in the history list.
Move to the end of the line. If already at the end of the buffer, move to the next history line.
Move to the last event in the history list.
Fetch the history line specified by the numeric argument. This defaults to the current history line (i.e. the one that isn't history yet).
Search backward incrementally for a specified string. The search is case-insensitive if the search string does not have uppercase letters and no numeric argument was given. The string may begin with `^' to anchor the search to the beginning of the line. When called from a user-defined function returns the following statuses: 0, if the search succeeded; 1, if the search failed; 2, if the search term was a bad pattern; 3, if the search was aborted by the send-break command.

A restricted set of editing functions is available in the mini-buffer. Keys are looked up in the special isearch keymap, and if not found there in the main keymap (note that by default the isearch keymap is empty). An interrupt signal, as defined by the stty setting, will stop the search and go back to the original line. An undefined key will have the same effect. Note that the following always perform the same task within incremental searches and cannot be replaced by user defined widgets, nor can the set of functions be extended. The supported functions are:

accept-and-hold
accept-and-infer-next-history
accept-line
accept-line-and-down-history
Perform the usual function after exiting incremental search. The command line displayed is executed.
backward-delete-char
vi-backward-delete-char
Back up one place in the search history. If the search has been repeated this does not immediately erase a character in the minibuffer.
Exit incremental search, retaining the command line but performing no further action. Note that this function is not bound by default and has no effect outside incremental search.
backward-delete-word
backward-kill-word
vi-backward-kill-word
Back up one character in the minibuffer; if multiple searches have been performed since the character was inserted the search history is rewound to the point just before the character was entered. Hence this has the effect of repeating backward-delete-char.
Clear the screen, remaining in incremental search mode.
Find the next occurrence of the contents of the mini-buffer.
Invert the sense of the search.
Inserts a non-magical space.
quoted-insert
vi-quoted-insert
Quote the character to insert into the minibuffer.
Redisplay the command line, remaining in incremental search mode.
Toggle between the `main' and `vicmd' keymaps; the `main' keymap (insert mode) will be selected initially.
vi-repeat-search
vi-rev-repeat-search
Repeat the search. The direction of the search is indicated in the mini-buffer.

Any character that is not bound to one of the above functions, or self-insert or self-insert-unmeta, will cause the mode to be exited. The character is then looked up and executed in the keymap in effect at that point.

When called from a widget function by the zle command, the incremental search commands can take a string argument. This will be treated as a string of keys, as for arguments to the bindkey command, and used as initial input for the command. Any characters in the string which are unused by the incremental search will be silently ignored. For example,

zle history-incremental-search-backward forceps

will search backwards for forceps, leaving the minibuffer containing the string `forceps'.

Search forward incrementally for a specified string. The search is case-insensitive if the search string does not have uppercase letters and no numeric argument was given. The string may begin with `^' to anchor the search to the beginning of the line. The functions available in the mini-buffer are the same as for history-incremental-search-backward.
history-incremental-pattern-search-backward
history-incremental-pattern-search-forward
These widgets behave similarly to the corresponding widgets with no -pattern, but the search string typed by the user is treated as a pattern, respecting the current settings of the various options affecting pattern matching. See FILENAME GENERATION in zshexpn(1) for a description of patterns. If no numeric argument was given lowercase letters in the search string may match uppercase letters in the history. The string may begin with `^' to anchor the search to the beginning of the line.

The prompt changes to indicate an invalid pattern; this may simply indicate the pattern is not yet complete.

Note that only non-overlapping matches are reported, so an expression with wildcards may return fewer matches on a line than are visible by inspection.

Search backward in the history for a line beginning with the first word in the buffer.

If called from a function by the zle command with arguments, the first argument is taken as the string for which to search, rather than the first word in the buffer.

Search backward in the history for a specified string. The string may begin with `^' to anchor the search to the beginning of the line.

A restricted set of editing functions is available in the mini-buffer. An interrupt signal, as defined by the stty setting, will stop the search. The functions available in the mini-buffer are: accept-line, backward-delete-char, vi-backward-delete-char, backward-kill-word, vi-backward-kill-word, clear-screen, redisplay, quoted-insert and vi-quoted-insert.

vi-cmd-mode is treated the same as accept-line, and magic-space is treated as a space. Any other character that is not bound to self-insert or self-insert-unmeta will beep and be ignored. If the function is called from vi command mode, the bindings of the current insert mode will be used.

If called from a function by the zle command with arguments, the first argument is taken as the string for which to search, rather than the first word in the buffer.

Search forward in the history for a line beginning with the first word in the buffer.

If called from a function by the zle command with arguments, the first argument is taken as the string for which to search, rather than the first word in the buffer.

Search forward in the history for a specified string. The string may begin with `^' to anchor the search to the beginning of the line. The functions available in the mini-buffer are the same as for vi-history-search-backward. Argument handling is also the same as for that command.
Search in the history list for a line matching the current one and fetch the event following it.
Insert the last word from the previous history event at the cursor position. If a positive numeric argument is given, insert that word from the end of the previous history event. If the argument is zero or negative insert that word from the left (zero inserts the previous command word). Repeating this command replaces the word just inserted with the last word from the history event prior to the one just used; numeric arguments can be used in the same way to pick a word from that event.

When called from a shell function invoked from a user-defined widget, the command can take one to three arguments. The first argument specifies a history offset which applies to successive calls to this widget: if it is -1, the default behaviour is used, while if it is 1, successive calls will move forwards through the history. The value 0 can be used to indicate that the history line examined by the previous execution of the command will be reexamined. Note that negative numbers should be preceded by a `--' argument to avoid confusing them with options.

If two arguments are given, the second specifies the word on the command line in normal array index notation (as a more natural alternative to the prefix argument). Hence 1 is the first word, and -1 (the default) is the last word.

If a third argument is given, its value is ignored, but it is used to signify that the history offset is relative to the current history line, rather than the one remembered after the previous invocations of insert-last-word.

For example, the default behaviour of the command corresponds to

zle insert-last-word -- -1 -1

while the command

zle insert-last-word -- -1 1 -

always copies the first word of the line in the history immediately before the line being edited. This has the side effect that later invocations of the widget will be relative to that line.

Repeat the last vi history search.
Repeat the last vi history search, but in reverse.
Move up a line in the buffer, or if already at the top line, move to the previous event in the history list.
Move up a line in the buffer, or if already at the top line, move to the previous event in the history list. Then move to the first non-blank character on the line.
Move up a line in the buffer, or if already at the top line, search backward in the history for a line beginning with the first word in the buffer.

If called from a function by the zle command with arguments, the first argument is taken as the string for which to search, rather than the first word in the buffer.

Move to the previous event in the history list.
Search forward in the history for a line beginning with the current line up to the cursor. This leaves the cursor in its original position.

Modifying Text

vi-add-eol (unbound) (A) (unbound)
Move to the end of the line and enter insert mode.
Enter insert mode after the current cursor position, without changing lines.
Delete the character behind the cursor.
Delete the character behind the cursor, without changing lines. If in insert mode, this won't delete past the point where insert mode was last entered.
Delete the word behind the cursor.
Kill from the beginning of the line to the cursor position.
Kill the word behind the cursor.
Kill the word behind the cursor, without going past the point where insert mode was last entered.
Capitalize the current word and move past it.
Read a movement command from the keyboard, and kill from the cursor position to the endpoint of the movement. Then enter insert mode. If the command is vi-change, change the current line.
Kill to the end of the line and enter insert mode.
Kill the current line and enter insert mode.
Copy the area from the cursor to the mark to the kill buffer.

If called from a ZLE widget function in the form `zle copy-region-as-kill string' then string will be taken as the text to copy to the kill buffer. The cursor, the mark and the text on the command line are not used in this case.

Duplicate the word to the left of the cursor.
Like copy-prev-word, but the word is found by using shell parsing, whereas copy-prev-word looks for blanks. This makes a difference when the word is quoted and contains spaces.
Read a movement command from the keyboard, and kill from the cursor position to the endpoint of the movement. If the command is vi-delete, kill the current line.
Delete the character under the cursor.
Delete the character under the cursor, without going past the end of the line.
Delete the current word.
Convert the current word to all lowercase and move past it.
Kill the current word.
Exchange the two characters behind the cursor.
Indent a number of lines.
Enter insert mode.
Move to the first non-blank character on the line and enter insert mode.
Join the current line with the next one.
Kill from the cursor to the end of the line. If already on the end of the line, kill the newline character.
Kill from the cursor back to wherever insert mode was last entered.
Kill from the cursor to the end of the line.
Kill from the cursor to the mark.
Kill the entire buffer.
Kill the current line.
Move to the bracket character (one of {}, () or []) that matches the one under the cursor. If the cursor is not on a bracket character, move forward without going past the end of the line to find one, and then go to the matching bracket.
Open a line above the cursor and enter insert mode.
Open a line below the cursor and enter insert mode.
Read a movement command from the keyboard, and swap the case of all characters from the cursor position to the endpoint of the movement. If the movement command is vi-oper-swap-case, swap the case of all characters on the current line.
Toggle between overwrite mode and insert mode.
Insert the contents of the kill buffer before the cursor. If the kill buffer contains a sequence of lines (as opposed to characters), paste it above the current line.
Insert the contents of the kill buffer after the cursor. If the kill buffer contains a sequence of lines (as opposed to characters), paste it below the current line.
Insert the next character typed into the buffer literally. An interrupt character will not be inserted.
Display a `^' at the cursor position, and insert the next character typed into the buffer literally. An interrupt character will not be inserted.
Quote the current line; that is, put a `'' character at the beginning and the end, and convert all `'' characters to `'\'''.
Quote the region from the cursor to the mark.
Enter overwrite mode.
Repeat the last vi mode text modification. If a count was used with the modification, it is remembered. If a count is given to this command, it overrides the remembered count, and is remembered for future uses of this command. The cut buffer specification is similarly remembered.
Replace the character under the cursor with a character read from the keyboard.
Insert a character into the buffer at the cursor position.
Insert a character into the buffer after stripping the meta bit and converting ^M to ^J.
Substitute the next character(s).
Swap the case of the character under the cursor and move past it.
Exchange the two characters to the left of the cursor if at end of line, else exchange the character under the cursor with the character to the left.
Exchange the current word with the one before it.
Unindent a number of lines.
Convert the current word to all caps and move past it.
Insert the contents of the kill buffer at the cursor position.
Remove the text just yanked, rotate the kill-ring (the history of previously killed text) and yank the new top. Only works following yank or yank-pop.
Read a movement command from the keyboard, and copy the region from the cursor position to the endpoint of the movement into the kill buffer. If the command is vi-yank, copy the current line.
Copy the current line into the kill buffer.
Copy the region from the cursor position to the end of the line into the kill buffer. Arguably, this is what Y should do in vi, but it isn't what it actually does.

Arguments

digit-argument (ESC-0..ESC-9) (1-9) (unbound)
Start a new numeric argument, or add to the current one. See also vi-digit-or-beginning-of-line. This only works if bound to a key sequence ending in a decimal digit.

Inside a widget function, a call to this function treats the last key of the key sequence which called the widget as the digit.

Changes the sign of the following argument.
Multiply the argument of the next command by 4. Alternatively, if this command is followed by an integer (positive or negative), use that as the argument for the next command. Thus digits cannot be repeated using this command. For example, if this command occurs twice, followed immediately by forward-char, move forward sixteen spaces; if instead it is followed by -2, then forward-char, move backward two spaces.

Inside a widget function, if passed an argument, i.e. `zle universal-argument num', the numerical argument will be set to num; this is equivalent to `NUMERIC=num'.

Use the existing numeric argument as a numeric base, which must be in the range 2 to 36 inclusive. Subsequent use of digit-argument and universal-argument will input a new prefix in the given base. The usual hexadecimal convention is used: the letter a or A corresponds to 10, and so on. Arguments in bases requiring digits from 10 upwards are more conveniently input with universal-argument, since ESC-a etc. are not usually bound to digit-argument.

The function can be used with a command argument inside a user-defined widget. The following code sets the base to 16 and lets the user input a hexadecimal argument until a key out of the digit range is typed:

zle argument-base 16
zle universal-argument

Completion

accept-and-menu-complete
In a menu completion, insert the current completion into the buffer, and advance to the next possible completion.
Attempt completion on the current word.
Delete the character under the cursor. If the cursor is at the end of the line, list possible completions for the current word.
Expand the current command to its full pathname.
Attempt shell expansion on the current word. If that fails, attempt completion.
Attempt shell expansion on the current word up to cursor.
Perform history expansion on the edit buffer.
Attempt shell expansion on the current word.
List possible completions for the current word.
List the expansion of the current word.
Perform history expansion and insert a space into the buffer. This is intended to be bound to space.
Like complete-word, except that menu completion is used. See the MENU_COMPLETE option.
Like expand-or-complete, except that menu completion is used.
Perform menu completion, like menu-complete, except that if a menu completion is already in progress, move to the previous completion rather than the next.
When a previous completion displayed a list below the prompt, this widget can be used to move the prompt below the list.

Miscellaneous

accept-and-hold (ESC-A ESC-a) (unbound) (unbound)
Push the contents of the buffer on the buffer stack and execute it.
Execute the contents of the buffer. Then search the history list for a line matching the current one and push the event following onto the buffer stack.
Finish editing the buffer. Normally this causes the buffer to be executed as a shell command.
Execute the current line, and push the next history event on the the buffer stack.
If the previous action added a suffix (space, slash, etc.) to the word on the command line, remove it. Otherwise do nothing. Removing the suffix ends any active menu completion or menu selection.

This widget is intended to be called from user-defined widgets to enforce a desired suffix-removal behavior.

If the previous action added a suffix (space, slash, etc.) to the word on the command line, force it to be preserved. Otherwise do nothing. Retaining the suffix ends any active menu completion or menu selection.

This widget is intended to be called from user-defined widgets to enforce a desired suffix-preservation behavior.

Beep, unless the BEEP option is unset.
Enter command mode; that is, select the `vicmd' keymap. Yes, this is bound by default in emacs mode.
Hang until any lowercase key is pressed. This is for vi users without the mental capacity to keep track of their caps lock key (like the author).
Clear the screen and redraw the prompt.
Reads a key sequence, then prints the function bound to that sequence.
Exchange the cursor position (point) with the position of the mark. Unless a negative prefix argument is given, the region between point and mark is activated so that it can be highlighted. If a zero prefix argument is given, the region is activated but point and mark are not swapped.
Read the name of an editor command and execute it. A restricted set of editing functions is available in the mini-buffer. Keys are looked up in the special command keymap, and if not found there in the main keymap. An interrupt signal, as defined by the stty setting, will abort the function. Note that the following always perform the same task within the executed-named-cmd environment and cannot be replaced by user defined widgets, nor can the set of functions be extended. The allowed functions are: backward-delete-char, vi-backward-delete-char, clear-screen, redisplay, quoted-insert, vi-quoted-insert, backward-kill-word, vi-backward-kill-word, kill-whole-line, vi-kill-line, backward-kill-line, list-choices, delete-char-or-list, complete-word, accept-line, expand-or-complete and expand-or-complete-prefix.

kill-region kills the last word, and vi-cmd-mode is treated the same as accept-line. The space and tab characters, if not bound to one of these functions, will complete the name and then list the possibilities if the AUTO_LIST option is set. Any other character that is not bound to self-insert or self-insert-unmeta will beep and be ignored. The bindings of the current insert mode will be used.

Currently this command may not be redefined or called by name.

Redo the last function executed with execute-named-cmd.

Currently this command may not be redefined or called by name.

Pop the top line off the buffer stack and insert it at the cursor position.
If there is no # character at the beginning of the buffer, add one to the beginning of each line. If there is one, remove a # from each line that has one. In either case, accept the current line. The INTERACTIVE_COMMENTS option must be set for this to have any usefulness.
If there is no # character at the beginning of the current line, add one. If there is one, remove it. The INTERACTIVE_COMMENTS option must be set for this to have any usefulness.
Push the entire current multiline construct onto the buffer stack and return to the top-level (PS1) prompt. If the current parser construct is only a single line, this is exactly like push-line. Next time the editor starts up or is popped with get-line, the construct will be popped off the top of the buffer stack and loaded into the editing buffer.
Push the current buffer onto the buffer stack and clear the buffer. Next time the editor starts up, the buffer will be popped off the top of the buffer stack and loaded into the editing buffer.
At the top-level (PS1) prompt, equivalent to push-line. At a secondary (PS2) prompt, move the entire current multiline construct into the editor buffer. The latter is equivalent to push-input followed by get-line.
Only useful from a user-defined widget. A keystroke is read just as in normal operation, but instead of the command being executed the name of the command that would be executed is stored in the shell parameter REPLY. This can be used as the argument of a future zle command. If the key sequence is not bound, status 1 is returned; typically, however, REPLY is set to undefined-key to indicate a useless key sequence.
Only useful from a user-defined widget. At this point in the function, the editor regains control until one of the standard widgets which would normally cause zle to exit (typically an accept-line caused by hitting the return key) is executed. Instead, control returns to the user-defined widget. The status returned is non-zero if the return was caused by an error, but the function still continues executing and hence may tidy up. This makes it safe for the user-defined widget to alter the command line or key bindings temporarily.

The following widget, caps-lock, serves as an example.

self-insert-ucase() {

LBUFFER+=${(U)KEYS[-1]} }
integer stat
zle -N self-insert self-insert-ucase
zle -A caps-lock save-caps-lock
zle -A accept-line caps-lock
zle recursive-edit
stat=$?
zle -A .self-insert self-insert
zle -A save-caps-lock caps-lock
zle -D save-caps-lock
(( stat )) && zle send-break
return $stat
This causes typed letters to be inserted capitalised until either accept-line (i.e. typically the return key) is typed or the caps-lock widget is invoked again; the later is handled by saving the old definition of caps-lock as save-caps-lock and then rebinding it to invoke accept-line. Note that an error from the recursive edit is detected as a non-zero return status and propagated by using the send-break widget.
Redisplays the edit buffer.
Force the prompts on both the left and right of the screen to be re-expanded, then redisplay the edit buffer. This reflects changes both to the prompt variables themselves and changes in the expansion of the values (for example, changes in time or directory, or changes to the value of variables referred to by the prompt).

Otherwise, the prompt is only expanded each time zle starts, and when the display as been interrupted by output from another part of the shell (such as a job notification) which causes the command line to be reprinted.

Abort the current editor function, e.g. execute-named-command, or the editor itself, e.g. if you are in vared. Otherwise abort the parsing of the current line; in this case the aborted line is available in the shell variable ZLE_LINE_ABORTED.
Push the buffer onto the buffer stack, and execute the command `run-help cmd', where cmd is the current command. run-help is normally aliased to man.
Specify a buffer to be used in the following command. There are 35 buffers that can be specified: the 26 `named' buffers "a to "z and the nine `queued' buffers "1 to "9. The named buffers can also be specified as "A to "Z.

When a buffer is specified for a cut command, the text being cut replaces the previous contents of the specified buffer. If a named buffer is specified using a capital, the newly cut text is appended to the buffer instead of overwriting it.

If no buffer is specified for a cut command, "1 is used, and the contents of "1 to "8 are each shifted along one buffer; the contents of "9 is lost.

Set the specified mark at the cursor position.
Set the mark at the cursor position. If called with a negative prefix argument, do not set the mark but deactivate the region so that it is no longer highlighted (it is still usable for other purposes). Otherwise the region is marked as active.
Attempt spelling correction on the current word.
This command is executed when a key sequence that is not bound to any command is typed. By default it beeps.
Incrementally undo the last text modification.
Incrementally redo undone text modifications.
Undo the last text modification. If repeated, redo the modification.
Print the character under the cursor, its code as an octal, decimal and hexadecimal number, the current cursor position within the buffer and the column of the cursor in the current line.
Read the name of an editor command and and print the listing of key sequences that invoke the specified command. A restricted set of editing functions is available in the mini-buffer. Keys are looked up in the special command keymap, and if not found there in the main keymap.
Push the buffer onto the buffer stack, and execute the command `which-command cmd'. where cmd is the current command. which-command is normally aliased to whence.
If the last command executed was a digit as part of an argument, continue the argument. Otherwise, execute vi-beginning-of-line.

CHARACTER HIGHLIGHTING

The line editor has the ability to highlight characters or regions of the line that have a particular significance. This is controlled by the array parameter zle_highlight, if it has been set by the user.

If the parameter contains the single entry none all highlighting is turned off. Note the parameter is still expected to be an array.

Otherwise each entry of the array should consist of a word indicating a context for highlighting, then a colon, then a comma-separated list of the types of highlighting to apply in that context.

The contexts available for highlighting are the following:

default
Any text within the command line not affected by any other highlighting. Text outside the editable area of the command line is not affected.
When one of the incremental history search widgets is active, the area of the command line matched by the search string or pattern.
The region between the cursor (point) and the mark as set with set-mark-command. The region is only highlighted if it is active, which is the case if set-mark-command or exchange-point-and-mark has been called and the line has not been subsequently modified. The region can be deactivated by calling set-mark-command with a negative prefix argument, or reactivated by calling exchange-point-and-mark with a zero prefix argument. Note that whether or not the region is active has no effect on its use within widgets, it simply determines whether it is highlighted.
Individual characters that have no direct printable representation but are shown in a special manner by the line editor. These characters are described below.
This context is used in completion for characters that are marked as suffixes that will be removed if the completion ends at that point, the most obvious example being a slash (/) after a directory name. Note that suffix removal is configurable; the circumstances under which the suffix will be removed may differ for different completions.

zle_highlight may contain additional fields for controlling how terminal sequences to change colours are output. Each of the following is followed by a colon and a string in the same form as for key bindings. This will not be necessary for the vast majority of terminals as the defaults shown in parentheses are widely used.

fg_start_code (\e[3)
The start of the escape sequence for the foreground colour. This is followed by an ASCII digit representing the colour.
The number to use instead of the colour to reset the default foreground colour.
The end of the escape sequence for the foreground colour.
The start of the escape sequence for the background colour. This is followed by an ASCII digit representing the colour.
The number to use instead of the colour to reset the default background colour.
The end of the escape sequence for the background colour.

The available types of highlighting are the following. Note that not all types of highlighting are available on all terminals:

none
No highlighting is applied to the given context. It is not useful for this to appear with other types of highlighting; it is used to override a default.
The foreground colour should be set to colour, a decimal integer or the name of one of the eight most widely-supported colours.

Not all terminals support this and, of those that do, not all provide facilities to test the support, hence the user should decide based on the terminal type. Most terminals support the colours black, red, green, yellow, blue, magenta, cyan and white, which can be set by name. In addition. default may be used to set the terminal's default foreground colour. Abbreviations are allowed; b or bl selects black. Some terminals may generate additional colours if the bold attribute is also present.

On recent terminals and on systems with an up-to-date terminal database the number of colours supported may be tested by the command `echotc Co'; if this succeeds, it indicates a limit on the number of colours which will be enforced by the line editor. The number of colours is in any case limited to 256 (i.e. the range 0 to 255).

Colour is also known as color.

The background colour should be set to colour. This works similarly to the foreground colour, except the background is not usually affected by the bold attribute.
The characters in the given context are shown in a bold font. Not all terminals distinguish bold fonts.
The characters in the given context are shown in the terminal's standout mode. The actual effect is specific to the terminal; on many terminals it is inverse video. On some such terminals, where the cursor does not blink it appears with standout mode negated, making it less than clear where the cursor actually is. On such terminals one of the other effects may be preferable for highlighting the region and matched search string.
The characters in the given context are shown underlined. Some terminals show the foreground in a different colour instead; in this case whitespace will not be highlighted.

The characters described above as `special' are as follows. The formatting described here is used irrespective of whether the characters are highlighted:

ASCII control characters
Control characters in the ASCII range are shown as `^' followed by the base character.
This item applies to control characters not in the ASCII range, plus other characters as follows. If the MULTIBYTE option is in effect, multibyte characters not in the ASCII character set that are reported as having zero width are treated as combining characters when the option COMBINING_CHARS is on. If the option is off, or if a character appears where a combining character is not valid, the character is treated as unprintable.

Unprintable multibyte characters are shown as a hexadecimal number between angle brackets. The number is the code point of the character in the wide character set; this may or may not be Unicode, depending on the operating system.

If the MULTIBYTE option is in effect, any sequence of one or more bytes that does not form a valid character in the current character set is treated as a series of bytes each shown as a special character. This case can be distinguished from other unprintable characters as the bytes are represented as two hexadecimal digits between angle brackets, as distinct from the four or eight digits that are used for unprintable characters that are nonetheless valid in the current character set.

Not all systems support this: for it to work, the system's representation of wide characters must be code values from the Universal Character Set, as defined by IS0 10646 (also known as Unicode).


If zle_highlight is not set or no value applies to a particular context, the defaults applied are equivalent to

zle_highlight=(region:standout special:standout
suffix:bold isearch:underline)

i.e. both the region and special characters are shown in standout mode.

Within widgets, arbitrary regions may be highlighted by setting the special array parameter region_highlight; see above.

December 20, 2010 zsh 4.3.11