名前¶

virt-p2v-make-kickstart - Build the virt-p2v kickstart

書式¶

 virt-p2v-make-kickstart [-o p2v.ks] [--proxy=http://...] repo [repo...]

説明¶

virt-p2v(1) converts a physical machine to run virtualized on KVM, managed by libvirt, OpenStack, oVirt, Red Hat Enterprise Virtualisation (RHEV), or one of the other targets supported by virt-v2v(1).

Kickstart is a format used by Red Hat-derived distributions (such as Fedora, Red Hat Enterprise Linux, CentOS, Scientific Linux, and others) to describe how to make live CDs, install the distro, make "Spins" and so on. It is driven by a kickstart file.

virt-p2v-make-kickstart builds a kickstart file which can be used to build a bootable P2V ISO, live CD, USB key, or PXE image. This tool only builds the kickstart file, but this manual page describes some of the ways you can use the kickstart file.

BUILDING THE KICKSTART FILE¶

Using virt-p2v-make-kickstart is very simple:

 virt-p2v-make-kickstart fedora

will build a kickstart file for Fedora. The kickstart file will be called p2v.ks and located in the current directory.

The parameters are a list of one or more repositories. Some built-in repositories are available: "fedora", "rawhide", "koji" or "rhel-VERSION" (eg. "rhel-7.1"). You can also use a URL as a parameter to point to a repository, for example:

 virt-p2v-make-kickstart https://dl.fedoraproject.org/pub/fedora/linux/releases/21/Everything/x86_64/os/

To control the name of the output file, use the -o parameter. To tell kickstart to use a proxy server or web cache to download files, use the --proxy parameter.

BUILDING A LIVE CD / ISO¶

Once you have the kickstart file, you can use livecd-creator(8) to make a live CD:

 sudo livecd-creator p2v.ks

Before running this note that you should probably run "livecd-creator" in a disposable virtual machine for these reasons:

• You have to disable SELinux when running the tool.
• This tool has to be run as root, and has some nasty failure modes.
• You can only create the exact same Live CD distro as the host distro. Cross-builds will fail in strange ways (eg. RHBZ#1092327).

BUILDING A FEDORA SPIN USING KOJI¶

This requires "spin-livecd" permissions on Koji, which are not given out usually, even to Fedora packagers. However assuming you have been given these permissions (or have your own Koji instance, I guess), then you can do:

 koji spin-livecd [--scratch] virt-p2v 1.XX.YY rawhide x86_64 p2v.ks

• Add the "--scratch" option to do a scratch build (recommended for testing).
• "1.XX.YY" should match the libguestfs version
• Instead of "rawhide" you can use any Koji target.

BUILDING A BOOTABLE USB KEY¶

Use the livecd-iso-to-disk(8) program to convert the ISO created above to a USB key:

 sudo livecd-iso-to-disk livecd-p2v.iso /dev/sdX

BUILDING A PXE BOOT IMAGE¶

Use the "livecd-iso-to-pxeboot" program to convert the ISO created above to a PXE boot image.

 sudo livecd-iso-to-pxeboot livecd-p2v.iso

This creates a "tftpboot" subdirectory under the current directory containing the files required to PXE boot virt-p2v:

 $ ls -1R tftpboot/
 tftpboot/:
 initrd0.img
 pxelinux.0
 pxelinux.cfg/
 vmlinuz0
 
 tftpboot/pxelinux.cfg:
 default

32 OR 64 BIT VIRT-P2V?¶

Virt-p2v can convert any 32 or 64 bit guest, regardless of whether virt-p2v itself is built as a 32 or 64 bit binary. The only restriction is that 64 bit virt-p2v cannot run on 32 bit hardware.

Old virt-p2v 0.9 was always built as a 32 bit (i686) ISO. This meant that the CD could be booted on any 32- or 64-bit i686 or x86-64 hardware, and could convert any guest. The old virt-p2v ISO shipped by Red Hat was based on Red Hat Enterprise Linux (RHEL) 6.

Since RHEL 7 dropped support for 32 bit machines, current virt-p2v on RHEL can only be built for 64 bit. It cannot run on old 32 bit only hardware.

Fedora virt-p2v ISOs are generally built for 32 bit, so like the old RHEL 6-based virt-p2v 0.9 they can boot on any hardware.

TESTING VIRT-P2V USING QEMU¶

 qemu-kvm -m 1024 -hda /tmp/guest.img -cdrom /tmp/livecd-p2v.iso -boot d

ADDING EXTRA PACKAGES¶

You can install extra packages using the --install option. This can be useful for making a more fully-featured virt-p2v disk with extra tools for debugging and troubleshooting. Give a list of packages, separated by commas. For example:

 virt-p2v-make-kickstart [...] --install tcpdump,traceroute

ADDING AN SSH IDENTITY¶

You can inject an SSH identity (private key) file to the kickstart and hence into the ISO using the --inject-ssh-identity option. Note that you cannot inject a key once the ISO has been built.

First create a key pair. It must have an empty passphrase:

 ssh-keygen -t rsa -N '' -f id_rsa

This creates a private key ("id_rsa") and a public key ("id_rsa.pub") pair. The public key should be appended to the "authorized_keys" file on the virt-v2v conversion server (usually to "/root/.ssh/authorized_keys").

The private key should be added to the kickstart file and then discarded:

 virt-p2v-make-kickstart [...] --inject-ssh-identity id_rsa
 rm id_rsa

The ISO can then be built from the kickstart in the usual way (see above), and it will contain the embedded SSH identity (/var/tmp/id_rsa).

When booting virt-p2v, specify the URL of the injected file like this:

 │         User name: [root_____________________________] │
 │                                                        │
 │          Password: [    <leave this field blank>     ] │
 │                                                        │
 │  SSH Identity URL: [file:///var/tmp/id_rsa___________] │

or if using the kernel command line, add:

 p2v.identity=file:///var/tmp/id_rsa

For more information, see "SSH IDENTITIES" in virt-p2v(1).

オプション¶

--help

ヘルプを表示します。

--inject-ssh-identity id_rsa

Add an SSH identity (private key) file into the kickstart. See "ADDING AN SSH IDENTITY" above.

--install pkg,pkg,...

Add extra packages to the kickstart %packages section. See "ADDING EXTRA PACKAGES" above.

-o OUTPUT

--output OUTPUT

Write kickstart to "OUTPUT". If not specified, the default is p2v.ks in the current directory.

--proxy URL

Tell the kickstart to use a proxy server or web cache for downloads.

-v

--verbose

Enable verbose output. Use this if you need to debug problems with the script or if you are filing a bug.

-V

--version

バージョン番号を表示して、終了します。

ファイル¶

$libdir/virt-p2v/virt-p2v.xz

The virt-p2v(1) binary which is copied into the kickstart file.

The location of the binary can be changed by setting the "VIRT_P2V_DATA_DIR" environment variable.

$datadir/virt-p2v/issue

$datadir/virt-p2v/launch-virt-p2v.in

$datadir/virt-p2v/p2v.ks.in

$datadir/virt-p2v/p2v.service

Various data files that are used to make the kickstart.

The location of these files can be changed by setting the "VIRT_P2V_DATA_DIR" environment variable.

環境変数¶

"VIRT_P2V_DATA_DIR"

The directory where virt-p2v-make-kickstart looks for data files and the virt-p2v binary (see "FILES" above). If not set, a compiled-in location is used.

関連項目¶

virt-p2v(1), virt-p2v-make-disk(1), virt-v2v(1), livecd-creator(8), livecd-iso-to-disk(8), http://libguestfs.org/.

著者¶

Richard W.M. Jones http://people.redhat.com/~rjones/

COPYRIGHT¶

Copyright (C) 2009-2019 Red Hat Inc.

LICENSE¶

BUGS¶

To get a list of bugs against libguestfs, use this link: https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools

To report a new bug against libguestfs, use this link: https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

When reporting a bug, please supply:

• The version of libguestfs.
• Where you got libguestfs (eg. which Linux distro, compiled from source, etc)
• Describe the bug accurately and give a way to reproduce it.
• Run libguestfs-test-tool(1) and paste the complete, unedited output into the bug report.