Usage:¶

lt-qmicli [OPTION...] - Control QMI devices

Help Options:¶

-h, --help

Show help options

--help-all

Show all help options

--help-dms

Show Device Management Service options

--help-nas

Show Network Access Service options

--help-wds

Show Wireless Data Service options

--help-pbm

Show Phonebook Management options

--help-pdc

Show platform device configurations options

--help-uim

Show User Identity Module options

--help-wms

Show Wireless Messaging Service options

--help-wda

Show Wireless Data Administrative options

--help-voice

Show Voice Service options

DMS options

--dms-get-ids

Get IDs

--dms-get-capabilities

Get capabilities

--dms-get-manufacturer

Get manufacturer

--dms-get-model

Get model

--dms-get-revision

Get revision

--dms-get-msisdn

Get MSISDN

--dms-get-power-state

Get power state

--dms-uim-set-pin-protection=[(PIN|PIN2),(disable|enable),(current PIN)]

Set PIN protection in the UIM

--dms-uim-verify-pin=[(PIN|PIN2),(current PIN)]

Verify PIN

--dms-uim-unblock-pin=[(PIN|PIN2),(PUK),(new PIN)]

Unblock PIN

--dms-uim-change-pin=[(PIN|PIN2),(old PIN),(new PIN)]

Change PIN

--dms-uim-get-pin-status

Get PIN status

--dms-uim-get-iccid

Get ICCID

--dms-uim-get-imsi

Get IMSI

--dms-uim-get-state

Get UIM State

--dms-uim-get-ck-status=[(pn|pu|pp|pc|pf)]

Get CK Status

--dms-uim-set-ck-protection=[(pn|pu|pp|pc|pf),(disable),(key)]

Disable CK protection

--dms-uim-unblock-ck=[(pn|pu|pp|pc|pf),(key)]

Unblock CK

--dms-get-hardware-revision

Get the HW revision

--dms-get-operating-mode

Get the device operating mode

--dms-set-operating-mode=[(Operating mode)]

Set the device operating mode

--dms-get-time

Get the device time

--dms-get-prl-version

Get the PRL version

--dms-get-activation-state

Get the state of the service activation

--dms-activate-automatic=[Activation Code]

Request automatic service activation

--dms-activate-manual=[SPC,SID,MDN,MIN]

Request manual service activation

--dms-get-user-lock-state

Get the state of the user lock

--dms-set-user-lock-state=[(disable|enable),(current lock code)]

Set the state of the user lock

--dms-set-user-lock-code=[(old lock code),(new lock code)]

Change the user lock code

--dms-read-user-data

Read user data

--dms-write-user-data=[(User data)]

Write user data

--dms-read-eri-file

Read ERI file

--dms-restore-factory-defaults=[(Service Programming Code)]

Restore factory defaults

--dms-validate-service-programming-code=[(Service Programming Code)]

Validate the Service Programming Code

--dms-set-firmware-id

Set firmware id

--dms-get-band-capabilities

Get band capabilities

--dms-get-factory-sku

Get factory stock keeping unit

--dms-list-stored-images

List stored images

--dms-select-stored-image=[modem#,pri#] where # is the index

Select stored image

--dms-delete-stored-image=[modem#|pri#] where # is the index

Delete stored image

--dms-get-firmware-preference

Get firmware preference

--dms-set-firmware-preference=[(fwver),(config),(carrier)]

Set firmware preference

--dms-get-boot-image-download-mode

Get boot image download mode

--dms-set-boot-image-download-mode=[normal|boot-and-recovery]

Set boot image download mode

--dms-get-software-version

Get software version

--dms-set-fcc-authentication

Set FCC authentication

--dms-get-supported-messages

Get supported messages

--dms-hp-change-device-mode=[fastboot]

Change device mode (HP specific)

--dms-swi-get-current-firmware

Get Current Firmware (Sierra Wireless specific)

--dms-reset

Reset the service state

--dms-noop

Just allocate or release a DMS client. Use with `--client-no-release-cid' and/or `--client-cid'

NAS options

--nas-get-signal-strength

Get signal strength

--nas-get-signal-info

Get signal info

--nas-get-tx-rx-info=[(Radio Interface)]

Get TX/RX info

--nas-get-home-network

Get home network

--nas-get-serving-system

Get serving system

--nas-get-system-info

Get system info

--nas-get-technology-preference

Get technology preference

--nas-get-system-selection-preference

Get system selection preference

--nas-set-system-selection-preference=[cdma-1x|cdma-1xevdo|gsm|umts|lte|td-scdma]

Set system selection preference

--nas-network-scan

Scan networks

--nas-get-cell-location-info

Get Cell Location Info

--nas-force-network-search

Force network search

--nas-get-operator-name

Get operator name data

--nas-get-lte-cphy-ca-info

Get LTE Cphy CA Info

--nas-get-rf-band-info

Get RF Band Info

--nas-get-supported-messages

Get supported messages

--nas-reset

Reset the service state

--nas-noop

Just allocate or release a NAS client. Use with `--client-no-release-cid' and/or `--client-cid'

WDS options

--wds-start-network=["key=value,..."]

Start network (allowed keys: apn, 3gpp-profile, 3gpp2-profile, auth (PAP|CHAP|BOTH), username, password, autoconnect=yes, ip-type (4|6))

--wds-follow-network

Follow the network status until disconnected. Use with `--wds-start-network'

--wds-stop-network=[Packet data handle] OR [disable-autoconnect]

Stop network

--wds-get-current-settings

Get current settings

--wds-get-packet-service-status

Get packet service status

--wds-get-packet-statistics

Get packet statistics

--wds-get-data-bearer-technology

Get data bearer technology

--wds-get-current-data-bearer-technology

Get current data bearer technology

--wds-go-dormant

Make the active data connection go dormant

--wds-go-active

Make the active data connection go active

--wds-get-dormancy-status

Get the dormancy status of the active data connection

--wds-get-profile-list=[3gpp|3gpp2]

Get profile list

--wds-get-default-settings=[3gpp|3gpp2]

Get default settings

--wds-get-autoconnect-settings

Get autoconnect settings

--wds-set-autoconnect-settings=[(enabled|disabled|paused)[,(roaming-allowed|home-only)]]

Set autoconnect settings (roaming settings optional)

--wds-get-supported-messages

Get supported messages

--wds-reset

Reset the service state

--wds-bind-mux-data-port=["key=value,..."]

Bind qmux data port to controller device (allowed keys: mux-id, ep-iface-number) to be used with `--client-no-release-cid'

--wds-noop

Just allocate or release a WDS client. Use with `--client-no-release-cid' and/or `--client-cid'

PBM options

--pbm-get-all-capabilities

Get all phonebook capabilities

--pbm-noop

Just allocate or release a PBM client. Use with `--client-no-release-cid' and/or `--client-cid'

PDC options

--pdc-list-configs=[(platform|software)]

List all configs

--pdc-delete-config=[(platform|software),ConfigId]

Delete config

--pdc-activate-config=[(platform|software),ConfigId]

Activate config

--pdc-deactivate-config=[(platform|software),ConfigId]

Deactivate config

--pdc-load-config=[Path to config]

Load config to device

--pdc-noop

Just allocate or release a PDC client. Use with `--client-no-release-cid' and/or `--client-cid'

UIM options

--uim-set-pin-protection=[(PIN1|PIN2|UPIN),(disable|enable),(current PIN)]

Set PIN protection

--uim-verify-pin=[(PIN1|PIN2|UPIN),(current PIN)]

Verify PIN

--uim-unblock-pin=[(PIN1|PIN2|UPIN),(PUK),(new PIN)]

Unblock PIN

--uim-change-pin=[(PIN1|PIN2|UPIN),(old PIN),(new PIN)]

Change PIN

--uim-read-transparent=[0xNNNN,0xNNNN,...]

Read a transparent file given the file path

--uim-get-file-attributes=[0xNNNN,0xNNNN,...]

Get the attributes of a given file

--uim-get-card-status

Get card status

--uim-get-supported-messages

Get supported messages

--uim-sim-power-on=[(slot number)]

Power on SIM card

--uim-sim-power-off=[(slot number)]

Power off SIM card

--uim-reset

Reset the service state

--uim-noop

Just allocate or release a UIM client. Use with `--client-no-release-cid' and/or `--client-cid'

WMS options

--wms-get-supported-messages

Get supported messages

--wms-reset

Reset the service state

--wms-noop

Just allocate or release a WMS client. Use with `--client-no-release-cid' and/or `--client-cid'

WDA options

--wda-set-data-format=["key=value,..."]

Set data format (allowed keys: link-layer-protocol (802-3|raw-ip), ul-protocol (tlp|qc-ncm|mbim|rndis|qmap), dl-protocol (tlp|qc-ncm|mbim|rndis|qmap), dl-datagrams-max-size, dl-max-datagrams, ep-type (undefined|hsusb), ep-iface-number)

--wda-get-data-format

Get data format

--wda-get-supported-messages

Get supported messages

--wda-noop

Just allocate or release a WDA client. Use with `--client-no-release-cid' and/or `--client-cid'

VOICE options

--voice-get-config

Get Voice service configuration

--voice-get-supported-messages

Get supported messages

--voice-noop

Just allocate or release a VOICE client. Use with `--client-no-release-cid' and/or `--client-cid'

Application Options:¶

-d, --device=[PATH]

Specify device path

-w, --get-wwan-iface

Get the WWAN iface name associated with this control port

-e, --get-expected-data-format

Get the expected data format in the WWAN iface

-E, --set-expected-data-format=[802-3|raw-ip]

Set the expected data format in the WWAN iface

--get-service-version-info

Get service version info

--device-set-instance-id=[Instance ID]

Set instance ID

--device-open-version-info

Run version info check when opening device

--device-open-sync

Run sync operation when opening device

-p, --device-open-proxy

Request to use the 'qmi-proxy' proxy

--device-open-qmi

Open a cdc-wdm device explicitly in QMI mode

--device-open-mbim

Open a cdc-wdm device explicitly in MBIM mode

--device-open-auto

Open a cdc-wdm device in either QMI or MBIM mode (default)

--device-open-net=[net-802-3|net-raw-ip|net-qos-header|net-no-qos-header]

Open device with specific link protocol and QoS flags

--client-cid=[CID]

Use the given CID, don't allocate a new one

--client-no-release-cid

Do not release the CID when exiting

-v, --verbose

Run action with verbose logs, including the debug ones

--silent

Run action with no logs; not even the error/warning ones

-V, --version

Print version

qmicli 1.18.0 Copyright © 2012-2017 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.