NAME¶

opareport

(All) Provides powerful fabric analysis and reporting capabilities. Must be run on a host connected to the Intel(R) Omni-Path Fabric with the Intel(R) Omni-Path Fabric Suite FastFabric Toolset installed.

Syntax¶

opareport [-v][-q] [-h hfi] [-p port] [--timeout] [-o report]
[-d detail] [-P|-H] [-N] [-x] [-X snapshot_input] [-T topology_input]
[-s] [-r] [-V] [-i seconds] [-b date_time] [-e date_time] [-C] [-a] [-m]
[-M] [-A] [-c file] [-L] [-F point] [-S point] [-D point] [-Q]

Options¶

--help

Produces full help text.

-v/--verbose

Returns verbose output.

-q/--quiet

Disables progress reports.

-h/--hfi hfi

Specifies the HFI, numbered 1..n. Using 0 specifies that the -p port port is a system-wide port number. Default is 0.

-p/--port port

Specifies the port, numbered 1..n. Using 0 specifies the first active port. Default is 0.

--timeout

Specifies the timeout (wait time for response) in ms. Default is 1000 ms.

-o/--output report

Specifies the report type for output. Refer to Report Types for details.

-d/--detail level

Specifies the level of detail 0-n for output. Default is 2.

-P/--persist

Only includes data persistent across reboots.

-H/--hard

Only includes permanent hardware data.

-N/--noname

Omits node and IOC names.

-x/--xml

Produces output in XML.

-X/--infile snapshot_input

Generates a report using the data in the snapshot_input file. snapshot_input must have been generated during a previous -o snapshot run. When used, the -s, -i, -C, and -a options are ignored. '-' may be used as the snapshot_input to specify stdin.

-T/--topology topology_input

Uses topology_input file to augment and verify fabric information. When used, various reports can be augmented with information not available electronically (such as cable labels). '-' may be used to specify stdin.

-s/--stats

Gets performance statistics for all ports.

-i/--interval seconds

Obtains performance statistics over interval seconds. Clears all statistics, waits interval seconds, then generates report. Implies -s option.

-b/--begin date_time

Obtains past performance stats over an interval beginning at date_time. Implies -s option. date_time may be a time entered as HH:MM[:SS] or date as mm/dd/YYYY, dd.mm.YYYY, YYYY-mm-dd or date followed by time; for example, "2016-07-04 14:40". Relative times are taken as "x [second|minute|hour|day](s) ago.

-e/--end date_time

Obtains past performance stats over an interval ending at date_time. Implies -s option.

date_time may be a time entered as HH:MM[:SS] or date as mm/dd/YYYY, dd.mm.YYYY, YYYY-mm-dd or date followed by time; for example, "2016-07-04 14:40". Relative times are taken as "x [second|minute|hour|day](s) ago.

-C/--clear

Clears performance statistics for all ports. Only statistics with error thresholds are cleared. A clear occurs after generating the report.

-a/--clearall

Clears all performance statistics for all ports.

-m/--smadirect

Accesses fabric information directly from SMA.

-M/--pmadirect

Accesses performance statistics using direct PMA.

-A/--allports

Gets PortInfo for down switch ports. Uses direct SMA to get this data. If used with -M, also gets PMA stats for down switch ports.

-c/--config file

Specifies the error thresholds configuration file. Default is /etc/opa/opamon.conf file.

-L/--limit

Limits operation to exact specified focus with -F for port error counters check (-o errors) and port counters clear (-C or -i). Normally, the neighbor of each selected port is also checked/cleared. Does not affect other reports.

-F/--focus point

Specifies the focus area for report.

Limits output to reflect a subsection of the fabric. May not work with all reports. (For example, route, mcgroups, and the verify* reports may ignore the option or not generate useful results.)

-S/--src point

Specifies the source for trace route. Default is local port.

-D/--dest point

Specifies the destination for trace route.

-Q/--quietfocus

Excludes focus description from report.

-h and -p options permit a variety of selections:¶

-h 0

First active port in system (Default).

-h 0 -p 0

First active port in system.

-h x

First active port on HFI x.

-h x -p 0

First active port on HFI x.

-h 0 -p y

Port y within system (no matter which ports are active).

-h x -p y

HFI x, port y.

Snapshot-Specific Options¶

-r/--routes

Gets routing tables for all switches.

-V/--vltables

Gets the P-Key tables for all nodes and the QoS VL-related tables for all ports.

Report Types¶

comps

Summary of all systems and SMs in fabric.

brcomps

Brief summary of all systems and SMs in fabric.

nodes

Summary of all node types and SMs in fabric.

brnodes

Brief summary of all node types and SMs in fabric.

ious

Summary of all IO units in the fabric.

lids

Summary of all LIDs in the fabric.

links

Summary of all links.

extlinks

Summary of links external to systems.

filinks

Summary of links to FIs.

islinks

Summary of inter-switch links.

extislinks

Summary of inter-switch links external to systems.

slowlinks

Summary of links running slower than expected.

slowconfiglinks

Summary of links configured to run slower than supported, includes slowlinks.

slowconnlinks

Summary of links connected with mismatched speed potential, includes slowconfiglinks.

misconfiglinks

Summary of links configured to run slower than supported.

misconnlinks

Summary of links connected with mismatched speed potential.

errors

Summary of links whose errors exceed counts in the configuration file.

otherports

Summary of ports not connected to the fabric.

linear

Summary of linear forwarding data base (FDB) for each switch.

mcast

Summary of multicast FDB for each switch in the fabric.

mcgroups

Summary of multicast groups.

When used in conjunction with -d, the following report details are possible:

This report can be used with option -X.

portusage

Summary of ports referenced in linear FDB for each switch, broken down by NodeType of DLID.

pathusage

Summary of number of FI to FI paths routed through each switch port.

treepathusage

Analysis of number of FI to FI paths routed through each switch port for a FAT tree.

portgroups

Summary of adaptive routing port groups for each switch.

quarantinednodes

Summary of quarantined nodes.

validateroutes

Validates all routes in the fabric.

validatevlroutes

Validates all routes in the fabric using SLSC, SCSC, and SCVL tables.

validatepgs

Validates all port groups in the fabric.

validatecreditloops

Validates topology configuration of the fabric to identify any existing credit loops.

validatevlcreditloops

Validates topology configuration of the fabric including SLSC, SCSC, and SCVL tables to identify any existing credit loops.

validatemcroutes

Validates multicast routes of the fabric to identify loops in multicast forwarding tables and detect MFT-multicast membership inconsistencies.

vfinfo

Summary of virtual fabric (vFabric) information.

vfmember

Summary of vFabric membership information.

dgmember

Summary of DeviceGroup membership information.

verifyfis

Compares fabric (or snapshot) FIs to supplied topology and identifies differences and omissions.

verifysws

Compares fabric (or snapshot) switches to supplied topology and identifies differences and omissions.

verifynodes

Returns verifyfis and verifysws reports.

verifysms

Compares fabric (or snapshot) SMs to supplied topology and identifies differences and omissions.

verifylinks

Compares fabric (or snapshot) links to supplied topology and identifies differences and omissions.

verifyextlinks

Compares fabric (or snapshot) links to supplied topology and identifies differences and omissions. Limits analysis to links external to systems.

verifyfilinks

Compares fabric (or snapshot) links to supplied topology and identify differences and omissions. Limits analysis to links to FIs.

verifyislinks

Compares fabric (or snapshot) links to supplied topology and identify differences and omissions. Limits analysis to inter-switch links.

verifyextislinks

Compares fabric (or snapshot) links to supplied topology and identify differences and omissions. Limits analysis to inter-switch links external to systems.

verifyall

Returns verifyfis, verifysws, verifysms, and verifylinks reports.

all

Returns comps, nodes, ious, links, extlinks, slowconnlinks, and errors reports.

route

Traces route between -S and -D points.

bfrctrl

Reports Buffer Control Tables for all ports.

snapshot

Outputs snapshot of the fabric state for later use as snapshot_input. This implies -x. May not be combined with other reports. When selected, -F, -P, -H, and -N options are ignored.

topology

Outputs the topology of the fabric for later use as topology_input. This implies -x. May not be combined with other reports. Use with detail level 3 or more to get Port element under Node in output xml.

none

No report, useful to clear statistics.

Point Syntax¶

gid:value

value is numeric port GID of form: subnet:guid.

lid:value

value is numeric LID.

lid:value:node

value is numeric LID, selects entire node with given LID.

lid:value:port:value2

value is numeric LID of node, value2 is port number.

portguid:value

value is numeric port GUID.

nodeguid:value

value is numeric node GUID.

nodeguid:value1:port:value2

value1 is numeric node GUID, value2 is port number.

iocguid:value

value is numeric IOC GUID.

iocguid:value1:port:value2

value1 is numeric IOC GUID, value2 is port number.

systemguid:value

value is numeric system image GUID.

systemguid:value1:port:value2

value1 is the numeric system image GUID, value2 is port number.

ioc:value

value is IOC Profile ID String (IOC Name).

ioc:value1:port:value2

value1 is IOC Profile ID String (IOC Name), value2 is port number.

iocpat:value

value is glob pattern for IOC Profile ID String (IOC Name).

iocpat:value1:port:value2

value1 is glob pattern for IOC Profile ID String (IOC Name), value2 is port number.

ioctype:value

value is IOC type (SRP or OTHER).

ioctype:value1:port:value2

value1 is IOC type (SRP or OTHER); value2 is port number.

node:value

value is node description (node name).

node:value1:port:value2

value1 is node description (node name), value2 is port number.

nodepat:value

value is glob pattern for node description (node name).

nodepat:value1:port:value2

value1 is the glob pattern for the node description (node name), value2 is port number.

nodedetpat:value

value is glob pattern for node details.

nodedetpat:value1:port:value2

value1 is the glob pattern for the node details, value2 is port number.

nodetype:value

value is node type (SW or FI).

nodetype:value1:port:value2

value1 is node type (SW or FI), value2 is port number.

rate:value

value is string for rate (25g, 50g, 75g, 100g), omits switch mgmt port 0.

portstate:value

value is a string for state (down, init, armed, active, notactive, initarmed).

portphysstate:value

value is a string for PHYs state (polling, disabled, training, linkup, recovery, offline, test)

mtucap:value

value is MTU size (2048, 4096, 8192, 10240), omits switch mgmt port 0.

labelpat:value

value is glob pattern for cable label.

lengthpat:value

value is glob pattern for cable length.

cabledetpat:value

value is glob pattern for cable details.

cabinflenpat:value

value is glob pattern for cable info length.

cabinfvendnamepat:value

value is glob pattern for cable info vendor name.

cabinfvendpnpat:value

value is glob pattern for cable info vendor part number.

cabinfvendrevpat:value

value is glob pattern for cable info vendor revision.

cabinfvendsnpat:value

value is glob pattern for cable info vendor serial number.

cabinftype:value

value is either optical, passive_copper, active_copper, or unknown.

linkdetpat:value

value is glob pattern for link details.

portdetpat:value

value is glob pattern for port details.

sm

Specifies the master subnet manager (SM).

smdetpat:value

value is glob pattern for SM details.

route:point1:point2

Specifies all ports along the routes between the two given points.

led:value

value is either on or off for LED port beacon.

linkqual:value

Specifies the ports with a link quality equal to value.

linkqualLE:value

Specifies the ports with a link quality less than or equal to value.

linkqualGE:value

Specifies the ports with a link quality greater than or equal to value.

Examples¶

opareport can generate hundreds of different reports. Commonly generated reports include the following:

opareport -o comps -d 3
opareport -o errors -o slowlinks
opareport -o nodes -F portguid:0x00117500a000447b
opareport -o nodes -F nodeguid:0x001175009800447b:port:1
opareport -o nodes -F nodeguid:0x001175009800447b
opareport -o nodes -F 'node:duster hfi1_0'
opareport -o nodes -F 'node:duster hfi1_0:port:1'
opareport -o nodes -F 'nodepat:d*'
opareport -o nodes -F 'nodepat:d*:port:1'
opareport -o nodes -F 'nodedetpat:compute*'
opareport -o nodes -F 'nodedetpat:compute*:port:1'
opareport -o nodes -F nodetype:FI
opareport -o nodes -F nodetype:FI:port:1
opareport -o nodes -F lid:1
opareport -o nodes -F led:on opareport -o nodes -F led:off opareport -o nodes -F lid:1:node
opareport -o nodes -F lid:1:port:2
opareport -o nodes -F gid:0xfe80000000000000:0x00117500a000447b
opareport -o nodes -F systemguid:0x001175009800447b
opareport -o nodes -F systemguid:0x001175009800447b:port:1
opareport -o nodes -F iocguid:0x00117501300001e0
opareport -o nodes -F iocguid:0x00117501300001e0:port:2
opareport -o nodes -F 'ioc:Chassis 0x001175005000010C, Slot 2, IOC 1'
opareport -o nodes -F 'ioc:Chassis 0x001175005000010C, Slot 2, IOC 1:port:2'
opareport -o nodes -F 'iocpat:*Slot 2*'
opareport -o nodes -F 'iocpat:*Slot 2*:port:2'
opareport -o nodes -F ioctype:SRP opareport -o nodes -F ioctype:SRP:port:2
opareport -o extlinks -F rate:100g
opareport -o extlinks -F portstate:armed
opareport -o extlinks -F portphysstate:linkup
opareport -o extlinks -F 'labelpat:S1345*'
opareport -o extlinks -F 'lengthpat:11m'
opareport -o extlinks -F 'cabledetpat:*hitachi*'
opareport -o extlinks -F 'linkdetpat:*core ISL*'
opareport -o extlinks -F 'portdetpat:*mgmt*'
opareport -o links -F mtucap:2048
opareport -o nodes -F sm
opareport -o nodes -F 'smdetpat:primary*'
opareport -o nodes -F 'route:node:duster hfi1_0:node:cuda hfi1_0'
opareport -o nodes -F 'route:node:duster hfi1_0:port:1:node:cuda hfi1_0:port:2'
opareport -s -o snapshot > file
opareport -o topology > topology.xml
opareport -o errors -X file
opareport -s --begin "2 days ago"
opareport -s --begin "12:30" --end "14:00"

Other Information¶

opareport also supports operation with the Fabric Manager Performance Manager (PM)/Performance Manager Agent (PMA). When opareport detects the presence of a PM, it automatically issues any required PortCounter queries and clears to the PM to access the PMs running totals. If a PM is not detected, then opareport directly accesses the PMAs on all the nodes. The -M option can force access to the PMA even if a PM is present.

opareport takes advantage of these interfaces to obtain extensive information about the fabric from the subnet manager and the end nodes. Using this information, opareport is able to cross-reference it and produce analysis greatly beyond what any single subnet manager request could provide. As such, it exceeds the capabilities previously available in tools such as opasaquery and opafabricinfo.

opareport obtains and displays counters from the Fabric Manager PM/PA or directly from the fabric PMAs using the -M option.

opareport internally cross-references all this information so its output can be in user-friendly form. Reports include GUIDs, LIDs, and names for components. Obviously, these reports are easiest to read if the end user has taken the time to provide unique names for all the components in the fabric (node names and IOC names). All Intel components support this capability. For hosts, the node names are automatically assigned based on the network host name of the server. For switches and line cards, the names can be assigned using the element managers for each component.

Each run of opareport obtains up-to-date information from the fabric. At the start of the run opareport takes a few seconds to obtain all the fabric data, then it is output to stdout. The reports are sorted by GUIDs and other permanent information so they can be rerun in the future and produce output in the same order even if components have been rebooted. This is useful for comparison using simple tools like diff. opareport permits multiple reports to be requested for a single run (for example, one of each report type).

By default, opareport uses the first active port on the local system. However, if the Management Node is connected to more than one fabric (for example, a subnet), the Intel(R) Omni-Path Host Fabric Interface (HFI) and port may be specified to select the fabric to analyze.