Scroll to navigation

tpm2_evictcontrol(1) General Commands Manual tpm2_evictcontrol(1)

NAME

tpm2_evictcontrol(1) - Make a transient object persistent or evict a persistent object.

SYNOPSIS

tpm2_evictcontrol [OPTIONS]

DESCRIPTION

tpm2_evictcontrol(1) - allows a transient object to be made persistent or a persistent object to be evicted.

OPTIONS

-A, –auth=AUTH: The authorization used to authorize the commands. Valid choices are:
o for TPM_RH_OWNER
p for TPM_RH_PLATFORM
-H, –handle=HANDLE: The handle of a loaded transient or a persistent object.

If the handle is for a transient object, then a handle that will be assigned to the persisted object must also be specified with the -S option.

If the handle is for a persistent object, then the -S does not need to be provided since the handle must be the same for both options.

-c, –context=OBJECT_CONTEXT_FILE: Filename for object context.
-S, –persistent=PERSISTENT_HANDLE: The persistent handle for the object handle specified via HANDLE.
-P, –pwda=AUTH_PASSWORD: authorization password, optional. Passwords should follow the “password formatting standards, see section”Password Formatting“.

COMMON OPTIONS

This collection of options are common to many programs and provide information that many users may expect.

-h, –help: Display the tools manpage. This requires the manpages to be installed or on MANPATH, See man(1) for more details.
-v, –version: Display version information for this tool, supported tctis and exit.
-V, –verbose: Increase the information that the tool prints to the console during its execution. When using this option the file and line number are printed.
-Q, –quiet: Silence normal tool output to stdout.
-Z, –enable-errata: Enable the application of errata fixups. Useful if an errata fixup needs to be applied to commands sent to the TPM. # TCTI ENVIRONMENT

This collection of environment variables that may be used to configure the various TCTI modules available.

The values passed through these variables can be overridden on a per-command basis using the available command line options, see the TCTI_OPTIONS section.

The variables respected depend on how the software was configured.

TPM2TOOLS_TCTI_NAME: Select the TCTI used for communication with the next component down the TSS stack. In most configurations this will be the TPM but it could be a simulator or proxy. The current known TCTIs are:
tabrmd - The new resource manager, called tabrmd (https://github.com/01org/tpm2-abrmd).
socket - Typically used with the old resource manager, or talking directly to a simulator.
device - Used when talking directly to a TPM device file.
TPM2TOOLS_DEVICE_FILE: When using the device TCTI, specify the TPM device file. The default is “/dev/tpm0”.

Note: Using the tpm directly requires the users to ensure that concurrent access does not occur and that they manage the tpm resources. These tasks are usually managed by a resource manager. Linux 4.12 and greater supports an in kernel resource manager at “/dev/tpmrm”, typically “/dev/tpmrm0”.

TPM2TOOLS_SOCKET_ADDRESS: When using the socket TCTI, specify the domain name or IP address used. The default is 127.0.0.1.
TPM2TOOLS_SOCKET_PORT: When using the socket TCTI, specify the port number used. The default is 2321.

TCTI OPTIONS

This collection of options are used to configure the varous TCTI modules available. They override any environment variables.

-T, –tcti=TCTI_NAME[:TCTI_OPTIONS]: Select the TCTI used for communication with the next component down the TSS stack. In most configurations this will be the resource manager: tabrmd (https://github.com/01org/tpm2-abrmd) Optionally, tcti specific options can appended to TCTI_NAME by appending a : to TCTI_NAME.
For the device TCTI, the TPM device file for use by the device TCTI can be specified. The default is /dev/tpm0. Example: -T device:/dev/tpm0
For the socket TCTI, the domain name or IP address and port number used by the socket can be specified. The default are 127.0.0.1 and 2321. Example: -T socket:127.0.0.1:2321
For the abrmd TCTI, it takes no options. Example: -T abrmd

Password Formatting

Passwords are interpreted in two forms, string and hex-string. A string password is not interpreted, and is directly used for authorization. A hex-string, is converted from a hexidecimal form into a byte array form, thus allowing passwords with non-printable and/or terminal un-friendly characters.

By default passwords are assumed to be in the string form. Password form is specified with special prefix values, they are:

str: - Used to indicate it is a raw string. Useful for escaping a password that starts with the “hex:” prefix.
hex: - Used when specifying a password in hex string format.

EXAMPLES

tpm2_evictcontrol -A o -c object.context -S 0x81010002 -P abc123
tpm2_evictcontrol -A o -H 0x81010002 -S 0x81010002 -P abc123
tpm2_evictcontrol -A o -H 0x81010002 -S 0x81010002 -P 123abc

RETURNS

0 on success or 1 on failure.

BUGS

Github Issues (https://github.com/01org/tpm2-tools/issues)

HELP

See the Mailing List (https://lists.01.org/mailman/listinfo/tpm2)

SEPTEMBER 2017 tpm2-tools