2. EL 8
  3. dpdk-devel
  4. RTE_MEMZONE_SIZE_HINT_ONLY(3)

Scroll to navigation

rte_memzone.h(3) DPDK rte_memzone.h(3)

NAME

rte_memzone.h

SYNOPSIS

#include <stdio.h>
#include <rte_memory.h>
#include <rte_common.h>

Data Structures


struct rte_memzone

Macros


#define RTE_MEMZONE_2MB 0x00000001
#define RTE_MEMZONE_1GB 0x00000002
#define RTE_MEMZONE_16MB 0x00000100
#define RTE_MEMZONE_16GB 0x00000200
#define RTE_MEMZONE_256KB 0x00010000
#define RTE_MEMZONE_256MB 0x00020000
#define RTE_MEMZONE_512MB 0x00040000
#define RTE_MEMZONE_4GB 0x00080000
#define RTE_MEMZONE_SIZE_HINT_ONLY 0x00000004
#define RTE_MEMZONE_IOVA_CONTIG 0x00100000
#define RTE_MEMZONE_NAMESIZE 32

Functions


__rte_experimental int rte_memzone_max_set (size_t max)
__rte_experimental size_t rte_memzone_max_get (void)
const struct rte_memzone * rte_memzone_reserve (const char *name, size_t len, int socket_id, unsigned flags)
const struct rte_memzone * rte_memzone_reserve_aligned (const char *name, size_t len, int socket_id, unsigned flags, unsigned align)
const struct rte_memzone * rte_memzone_reserve_bounded (const char *name, size_t len, int socket_id, unsigned flags, unsigned align, unsigned bound)
int rte_memzone_free (const struct rte_memzone *mz)
const struct rte_memzone * rte_memzone_lookup (const char *name)
void rte_memzone_dump (FILE *f)
void rte_memzone_walk (void(*func)(const struct rte_memzone *, void *arg), void *arg)

Detailed Description

RTE Memzone

The goal of the memzone allocator is to reserve contiguous portions of physical memory. These zones are identified by a name.

The memzone descriptors are shared by all partitions and are located in a known place of physical memory. This zone is accessed using rte_eal_get_configuration(). The lookup (by name) of a memory zone can be done in any partition and returns the same physical address.

A reserved memory zone cannot be unreserved. The reservation shall be done at initialization time only.

Definition in file rte_memzone.h.

Macro Definition Documentation

#define RTE_MEMZONE_2MB 0x00000001

Use 2MB pages.

Definition at line 33 of file rte_memzone.h.

#define RTE_MEMZONE_1GB 0x00000002

Use 1GB pages.

Definition at line 34 of file rte_memzone.h.

#define RTE_MEMZONE_16MB 0x00000100

Use 16MB pages.

Definition at line 35 of file rte_memzone.h.

#define RTE_MEMZONE_16GB 0x00000200

Use 16GB pages.

Definition at line 36 of file rte_memzone.h.

#define RTE_MEMZONE_256KB 0x00010000

Use 256KB pages.

Definition at line 37 of file rte_memzone.h.

#define RTE_MEMZONE_256MB 0x00020000

Use 256MB pages.

Definition at line 38 of file rte_memzone.h.

#define RTE_MEMZONE_512MB 0x00040000

Use 512MB pages.

Definition at line 39 of file rte_memzone.h.

#define RTE_MEMZONE_4GB 0x00080000

Use 4GB pages.

Definition at line 40 of file rte_memzone.h.

#define RTE_MEMZONE_SIZE_HINT_ONLY 0x00000004

Use available page size

Definition at line 41 of file rte_memzone.h.

#define RTE_MEMZONE_IOVA_CONTIG 0x00100000

Ask for IOVA-contiguous memzone.

Definition at line 42 of file rte_memzone.h.

#define RTE_MEMZONE_NAMESIZE 32

Maximum length of memory zone name.

Definition at line 50 of file rte_memzone.h.

Function Documentation

__rte_experimental int rte_memzone_max_set (size_t max)

Warning:

EXPERIMENTAL: this API may change without prior notice.

Set the maximum number of memzones.

This function can only be called prior to rte_eal_init().

Parameters:

max Maximum number of memzones.

Returns:

0 on success, -1 otherwise.

__rte_experimental size_t rte_memzone_max_get (void)

Warning:

EXPERIMENTAL: this API may change without prior notice.

Get the maximum number of memzones.

Note:

: The maximum value will not change after calling rte_eal_init().

Returns:

Maximum number of memzones.

const struct rte_memzone* rte_memzone_reserve (const char * name, size_t len, int socket_id, unsigned flags)

Reserve a portion of physical memory.

This function reserves some memory and returns a pointer to a correctly filled memzone descriptor. If the allocation cannot be done, return NULL.

Note:

Reserving memzones with len set to 0 will only attempt to allocate memzones from memory that is already available. It will not trigger any new allocations.

: When reserving memzones with len set to 0, it is preferable to also set a valid socket_id. Setting socket_id to SOCKET_ID_ANY is supported, but will likely not yield expected results. Specifically, the resulting memzone may not necessarily be the biggest memzone available, but rather biggest memzone available on socket id corresponding to an lcore from which reservation was called.

Parameters:

name The name of the memzone. If it already exists, the function will fail and return NULL.
len The size of the memory to be reserved. If it is 0, the biggest contiguous zone will be reserved.
socket_id The socket identifier in the case of NUMA. The value can be SOCKET_ID_ANY if there is no NUMA constraint for the reserved zone.
flags The flags parameter is used to request memzones to be taken from specifically sized hugepages.
  • RTE_MEMZONE_2MB - Reserved from 2MB pages
  • RTE_MEMZONE_1GB - Reserved from 1GB pages
  • RTE_MEMZONE_16MB - Reserved from 16MB pages
  • RTE_MEMZONE_16GB - Reserved from 16GB pages
  • RTE_MEMZONE_256KB - Reserved from 256KB pages
  • RTE_MEMZONE_256MB - Reserved from 256MB pages
  • RTE_MEMZONE_512MB - Reserved from 512MB pages
  • RTE_MEMZONE_4GB - Reserved from 4GB pages
  • RTE_MEMZONE_SIZE_HINT_ONLY - Allow alternative page size to be used if the requested page size is unavailable. If this flag is not set, the function will return error on an unavailable size request.
  • RTE_MEMZONE_IOVA_CONTIG - Ensure reserved memzone is IOVA-contiguous. This option should be used when allocating memory intended for hardware rings etc.

Returns:

A pointer to a correctly-filled read-only memzone descriptor, or NULL on error. On error case, rte_errno will be set appropriately:
  • E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
  • ENOSPC - the maximum number of memzones has already been allocated
  • EEXIST - a memzone with the same name already exists
  • ENOMEM - no appropriate memory area found in which to create memzone
  • EINVAL - invalid parameters

const struct rte_memzone* rte_memzone_reserve_aligned (const char * name, size_t len, int socket_id, unsigned flags, unsigned align)

Reserve a portion of physical memory with alignment on a specified boundary.

This function reserves some memory with alignment on a specified boundary, and returns a pointer to a correctly filled memzone descriptor. If the allocation cannot be done or if the alignment is not a power of 2, returns NULL.

Note:

Reserving memzones with len set to 0 will only attempt to allocate memzones from memory that is already available. It will not trigger any new allocations.

: When reserving memzones with len set to 0, it is preferable to also set a valid socket_id. Setting socket_id to SOCKET_ID_ANY is supported, but will likely not yield expected results. Specifically, the resulting memzone may not necessarily be the biggest memzone available, but rather biggest memzone available on socket id corresponding to an lcore from which reservation was called.

Parameters:

name The name of the memzone. If it already exists, the function will fail and return NULL.
len The size of the memory to be reserved. If it is 0, the biggest contiguous zone will be reserved.
socket_id The socket identifier in the case of NUMA. The value can be SOCKET_ID_ANY if there is no NUMA constraint for the reserved zone.
flags The flags parameter is used to request memzones to be taken from specifically sized hugepages.
  • RTE_MEMZONE_2MB - Reserved from 2MB pages
  • RTE_MEMZONE_1GB - Reserved from 1GB pages
  • RTE_MEMZONE_16MB - Reserved from 16MB pages
  • RTE_MEMZONE_16GB - Reserved from 16GB pages
  • RTE_MEMZONE_256KB - Reserved from 256KB pages
  • RTE_MEMZONE_256MB - Reserved from 256MB pages
  • RTE_MEMZONE_512MB - Reserved from 512MB pages
  • RTE_MEMZONE_4GB - Reserved from 4GB pages
  • RTE_MEMZONE_SIZE_HINT_ONLY - Allow alternative page size to be used if the requested page size is unavailable. If this flag is not set, the function will return error on an unavailable size request.
  • RTE_MEMZONE_IOVA_CONTIG - Ensure reserved memzone is IOVA-contiguous. This option should be used when allocating memory intended for hardware rings etc.

align Alignment for resulting memzone. Must be a power of 2.

Returns:

A pointer to a correctly-filled read-only memzone descriptor, or NULL on error. On error case, rte_errno will be set appropriately:
  • E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
  • ENOSPC - the maximum number of memzones has already been allocated
  • EEXIST - a memzone with the same name already exists
  • ENOMEM - no appropriate memory area found in which to create memzone
  • EINVAL - invalid parameters

const struct rte_memzone* rte_memzone_reserve_bounded (const char * name, size_t len, int socket_id, unsigned flags, unsigned align, unsigned bound)

Reserve a portion of physical memory with specified alignment and boundary.

This function reserves some memory with specified alignment and boundary, and returns a pointer to a correctly filled memzone descriptor. If the allocation cannot be done or if the alignment or boundary are not a power of 2, returns NULL. Memory buffer is reserved in a way, that it wouldn't cross specified boundary. That implies that requested length should be less or equal then boundary.

Note:

Reserving memzones with len set to 0 will only attempt to allocate memzones from memory that is already available. It will not trigger any new allocations.

: When reserving memzones with len set to 0, it is preferable to also set a valid socket_id. Setting socket_id to SOCKET_ID_ANY is supported, but will likely not yield expected results. Specifically, the resulting memzone may not necessarily be the biggest memzone available, but rather biggest memzone available on socket id corresponding to an lcore from which reservation was called.

Parameters:

name The name of the memzone. If it already exists, the function will fail and return NULL.
len The size of the memory to be reserved. If it is 0, the biggest contiguous zone will be reserved.
socket_id The socket identifier in the case of NUMA. The value can be SOCKET_ID_ANY if there is no NUMA constraint for the reserved zone.
flags The flags parameter is used to request memzones to be taken from specifically sized hugepages.
  • RTE_MEMZONE_2MB - Reserved from 2MB pages
  • RTE_MEMZONE_1GB - Reserved from 1GB pages
  • RTE_MEMZONE_16MB - Reserved from 16MB pages
  • RTE_MEMZONE_16GB - Reserved from 16GB pages
  • RTE_MEMZONE_256KB - Reserved from 256KB pages
  • RTE_MEMZONE_256MB - Reserved from 256MB pages
  • RTE_MEMZONE_512MB - Reserved from 512MB pages
  • RTE_MEMZONE_4GB - Reserved from 4GB pages
  • RTE_MEMZONE_SIZE_HINT_ONLY - Allow alternative page size to be used if the requested page size is unavailable. If this flag is not set, the function will return error on an unavailable size request.
  • RTE_MEMZONE_IOVA_CONTIG - Ensure reserved memzone is IOVA-contiguous. This option should be used when allocating memory intended for hardware rings etc.

align Alignment for resulting memzone. Must be a power of 2.
bound Boundary for resulting memzone. Must be a power of 2 or zero. Zero value implies no boundary condition.

Returns:

A pointer to a correctly-filled read-only memzone descriptor, or NULL on error. On error case, rte_errno will be set appropriately:
  • E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
  • ENOSPC - the maximum number of memzones has already been allocated
  • EEXIST - a memzone with the same name already exists
  • ENOMEM - no appropriate memory area found in which to create memzone
  • EINVAL - invalid parameters

int rte_memzone_free (const struct rte_memzone * mz)

Free a memzone.

Parameters:

mz A pointer to the memzone

Returns:

-EINVAL - invalid parameter. 0 - success

const struct rte_memzone* rte_memzone_lookup (const char * name)

Lookup for a memzone.

Get a pointer to a descriptor of an already reserved memory zone identified by the name given as an argument.

Parameters:

name The name of the memzone.

Returns:

A pointer to a read-only memzone descriptor.

void rte_memzone_dump (FILE * f)

Dump all reserved memzones to a file.

Parameters:

f A pointer to a file for output

void rte_memzone_walk (void(*)(const struct rte_memzone *, void *arg) func, void * arg)

Walk list of all memzones

Parameters:

func Iterator function
arg Argument passed to iterator

Author

Generated automatically by Doxygen for DPDK from the source code.

Thu May 23 2024 Version 23.11.0