General Format¶

Each file system object in a cpio archive comprises a header record with basic numeric metadata followed by the full pathname of the entry and the file data. The header record stores a series of integer values that generally follow the fields in struct stat. (See stat(2) for details.) The variants differ primarily in how they store those integers (binary, octal, or hexadecimal). The header is followed by the pathname of the entry (the length of the pathname is stored in the header) and any file data. The end of the archive is indicated by a special record with the pathname “TRAILER!!!”.

PWB format¶

XXX Any documentation of the original PWB/UNIX 1.0 format? XXX

Old Binary Format¶

The old binary cpio format stores numbers as 2-byte and 4-byte binary values. Each entry begins with a header in the following format:

struct header_old_cpio {
        unsigned short   c_magic;
        unsigned short   c_dev;
        unsigned short   c_ino;
        unsigned short   c_mode;
        unsigned short   c_uid;
        unsigned short   c_gid;
        unsigned short   c_nlink;
        unsigned short   c_rdev;
	unsigned short   c_mtime[2];
        unsigned short   c_namesize;
	unsigned short   c_filesize[2];
};

The unsigned short fields here are 16-bit integer values; the unsigned int fields are 32-bit integer values. The fields are as follows

magic

The integer value octal 070707. This value can be used to determine whether this archive is written with little-endian or big-endian integers.

dev, ino

The device and inode numbers from the disk. These are used by programs that read cpio archives to determine when two entries refer to the same file. Programs that synthesize cpio archives should be careful to set these to distinct values for each entry.

mode

The mode specifies both the regular permissions and the file type. It consists of several bit fields as follows:

0170000

This masks the file type bits.

0140000

File type value for sockets.

0120000

File type value for symbolic links. For symbolic links, the link body is stored as file data.

0100000

File type value for regular files.

0060000

File type value for block special devices.

0040000

File type value for directories.

0020000

File type value for character special devices.

0010000

File type value for named pipes or FIFOs.

0004000

SUID bit.

0002000

SGID bit.

0001000

Sticky bit. On some systems, this modifies the behavior of executables and/or directories.

0000777

The lower 9 bits specify read/write/execute permissions for world, group, and user following standard POSIX conventions.

uid, gid

The numeric user id and group id of the owner.

nlink

The number of links to this file. Directories always have a value of at least two here. Note that hardlinked files include file data with every copy in the archive.

rdev

For block special and character special entries, this field contains the associated device number. For all other entry types, it should be set to zero by writers and ignored by readers.

mtime

Modification time of the file, indicated as the number of seconds since the start of the epoch, 00:00:00 UTC January 1, 1970. The four-byte integer is stored with the most-significant 16 bits first followed by the least-significant 16 bits. Each of the two 16 bit values are stored in machine-native byte order.

namesize

The number of bytes in the pathname that follows the header. This count includes the trailing NUL byte.

filesize

The size of the file. Note that this archive format is limited to four gigabyte file sizes. See mtime above for a description of the storage of four-byte integers.

The pathname immediately follows the fixed header. If the namesize is odd, an additional NUL byte is added after the pathname. The file data is then appended, padded with NUL bytes to an even length.

Hardlinked files are not given special treatment; the full file contents are included with each copy of the file.

Portable ASCII Format¶

Version 2 of the Single UNIX Specification (“SUSv2”) standardized an ASCII variant that is portable across all platforms. It is commonly known as the “old character” format or as the “odc” format. It stores the same numeric fields as the old binary format, but represents them as 6-character or 11-character octal values.

struct cpio_odc_header {
        char    c_magic[6];
        char    c_dev[6];
        char    c_ino[6];
        char    c_mode[6];
        char    c_uid[6];
        char    c_gid[6];
        char    c_nlink[6];
        char    c_rdev[6];
        char    c_mtime[11];
        char    c_namesize[6];
        char    c_filesize[11];
};

The fields are identical to those in the old binary format. The name and file body follow the fixed header. Unlike the old binary format, there is no additional padding after the pathname or file contents. If the files being archived are themselves entirely ASCII, then the resulting archive will be entirely ASCII, except for the NUL byte that terminates the name field.

New ASCII Format¶

The "new" ASCII format uses 8-byte hexadecimal fields for all numbers and separates device numbers into separate fields for major and minor numbers.

struct cpio_newc_header {
        char    c_magic[6];
        char    c_ino[8];
        char    c_mode[8];
        char    c_uid[8];
        char    c_gid[8];
        char    c_nlink[8];
        char    c_mtime[8];
        char    c_filesize[8];
        char    c_devmajor[8];
        char    c_devminor[8];
        char    c_rdevmajor[8];
        char    c_rdevminor[8];
        char    c_namesize[8];
        char    c_check[8];
};

Except as specified below, the fields here match those specified for the old binary format above.

magic

The string “070701”.

check

This field is always set to zero by writers and ignored by readers. See the next section for more details.

The pathname is followed by NUL bytes so that the total size of the fixed header plus pathname is a multiple of four. Likewise, the file data is padded to a multiple of four bytes. Note that this format supports only 4 gigabyte files (unlike the older ASCII format, which supports 8 gigabyte files).

In this format, hardlinked files are handled by setting the filesize to zero for each entry except the last one that appears in the archive.

New CRC Format¶

The CRC format is identical to the new ASCII format described in the previous section except that the magic field is set to “070702” and the check field is set to the sum of all bytes in the file data. This sum is computed treating all bytes as unsigned values and using unsigned arithmetic. Only the least-significant 32 bits of the sum are stored.

HP variants¶

The cpio implementation distributed with HPUX used XXXX but stored device numbers differently XXX.

Other Extensions and Variants¶

Sun Solaris uses additional file types to store extended file data, including ACLs and extended attributes, as special entries in cpio archives.

XXX Others? XXX