NAME¶
ipsec__updown - kernel and routing manipulation script
SYNOPSIS¶
_updown is invoked by pluto when it has brought up a new
connection. This script is used to insert the appropriate routing entries
for IPsec operation on some kernel IPsec stacks, and may do other necessary
work that is kernel or user specific, such as defining custom firewall
rules. The interface to the script is documented in the pluto man page.
VARIABLES¶
The _updown is passed along a number of variables which can
be used to act differently based on the information:
PLUTO_VERB
specifies the name of the operation to be performed,
which can be one of prepare-host, prepare-client,
up-host, up-client, down-host or down-client. If
the address family for security gateway to security gateway communications is
IPv6, then a suffix of -v6 is added to this verb.
PLUTO_CONNECTION
is the name of the connection for which we are
routing.
PLUTO_NEXT_HOP
is the next hop to which packets bound for the peer must
be sent.
PLUTO_INTERFACE
is the name of the real interface used by encrypted
traffic and IKE traffic.
PLUTO_ME
is the IP address of our host.
PLUTO_MY_CLIENT
is the IP address / count of our client subnet. If the
client is just the host, this will be the host's own IP address / max (where
max is 32 for IPv4 and 128 for IPv6).
PLUTO_MY_CLIENT_NET
is the IP address of our client net. If the client is
just the host, this will be the host's own IP address.
PLUTO_MY_CLIENT_MASK
is the mask for our client net. If the client is just the
host, this will be 255.255.255.255.
PLUTO_PEER
is the IP address of our peer.
PLUTO_PEER_CLIENT
is the IP address / count of the peer's client subnet. If
the client is just the peer, this will be the peer's own IP address / max
(where max is 32 for IPv4 and 128 for IPv6).
PLUTO_PEER_CLIENT_NET
is the IP address of the peer's client net. If the client
is just the peer, this will be the peer's own IP address.
PLUTO_PEER_CLIENT_MASK
is the mask for the peer's client net. If the client is
just the peer, this will be 255.255.255.255.
PLUTO_MY_PROTOCOL
lists the protocols allowed over this IPsec SA.
PLUTO_PEER_PROTOCOL
lists the protocols the peer allows over this IPsec
SA.
PLUTO_MY_PORT
lists the ports allowed over this IPsec SA.
PLUTO_PEER_PORT
lists the ports the peer allows over this IPsec SA.
PLUTO_MY_ID
lists our id.
PLUTO_PEER_ID
lists our peer's id.
PLUTO_PEER_CA
lists the peer's CA.
HISTORY¶
Man page written for the Linux FreeS/WAN project
<https://www.freeswan.org/> by Michael Richardson. Original
program written by Henry Spencer.
AUTHOR¶
Paul Wouters
placeholder to suppress warning