table of contents
| inputattach(1) | General Commands Manual | inputattach(1) |
NAME¶
inputattach - attach a serial line to an input-layer device
SYNOPSIS¶
inputattach [--daemon] [--always] [--noinit] [--baud baud>] <mode> <device>
DESCRIPTION¶
inputattach attaches a serial line to an input-layer device via a line discipline.
Exactly one of the available modes must be specified on the command line.
OPTIONS¶
- --daemon
- Forks into the background.
- --always
- Ignore initialization failures when attaching the device.
- --noinit
- Skip device initialization.
- --baud
- Specify the baud rate to use. (This is only necessary if the default rate is incorrect.)
Modes¶
- -dump, --dump
- Just enable device.
- -eeti, --eetiegalax
- EETI eGalaxTouch.
- -ep, --easypen
- Genius EasyPen 3x4 tablet.
- -elo3b, --elo261-280
- ELO Touchscreen, 3-byte mode.
- -elo4b, --elo271-140
- ELO touchscreen, 4-byte mode.
- -elo6b, --elo4002
- ELO touchscreen, 6-byte mode.
- -elo, --elotouch
- ELO touchscreen, 10-byte mode.
- -fjt, --fujitsu
- Fujitsu serial touchscreen.
- -ipaq, --h3600ts
- Ipaq h3600 touchscreen.
- -ham, --hampshire
- Hampshire touchscreen.
- -ifor, --iforce
- I-Force joystick or wheel.
- -ms3, --intellimouse
- Microsoft IntelliMouse.
- -lk, --lkkbd
- DEC LK201 / LK401 keyboards.
- -mag, --magellan
- Magellan / SpaceMouse.
- -bare, --microsoft
- 2-button Microsoft mouse.
- -mmw, --mmwheel
- Logitech mouse with 4-5 buttons or a wheel.
- -mman4, --mouseman4
- 4-button Logitech / Genius mouse.
- -mman, --mouseman
- 3-button Logitech / Genius mouse.
- -msc, --mousesystems
- 3-button Mouse Systems mouse.
- -ms, --mshack
- 3-button mouse in Microsoft mode.
- -mtouch, --mtouch
- MicroTouch (3M) touchscreen.
- -newt, --newtonkbd
- Newton keyboard.
- -pm3k, --penmount3000
- PenMount 3000 touchscreen.
- -pm6k, --penmount6000
- PenMount 6000 touchscreen.
- -pmm1, --penmount6250
- PenMount 6250 touchscreen.
- -pm9k, --penmount9000
- PenMount 9000 touchscreen.
- -ps2m, --ps2mult
- PS/2 serial multiplexer.
- -ps2ser, --ps2serkbd
- PS/2 via serial keyboard.
- -pulse8-cec, --pulse8-cec
- Pulse Eight HDMI CEC dongle.
- -sbl, --spaceball
- SpaceBall 2003 / 3003 / 4000 FLX.
- -orb, --spaceorb
- SpaceOrb 360 / SpaceBall Avenger.
- -sting, --stinger
- Gravis Stinger.
- -ipaqkbd, --stowawaykbd
- Stowaway keyboard.
- -skb, --sunkbd
- Sun Type 4 and Type 5 keyboards.
- -sun, --sunmouse
- 3-button Sun mouse.
- -taos, --taos-evm
- TAOS evaluation module.
- -t213, --touchit213
- Sahara Touch-iT213 Tablet PC.
- -tr, --touchright
- Touchright serial touchscreen.
- -tw, --touchwin
- Touchwindow serial touchscreen.
- -tsc, --tsc
- TSC-10/25/40 serial touchscreen.
- -twidjoy, --twiddler-joy
- Handykey Twiddler used as a joystick.
- -twid, --twiddler
- Handykey Twiddler chording keyboard.
- -vs, --vsxxx-aa
- DEC VSXXX-AA / VSXXX-GA mouse and VSXXX-A tablet.
- -w8001, --w8001
- Wacom W8001 pen and/or touch devices. The default baud rate, 38400bps, allows for touch-only or pen and touch devices; for pen-only devices, "--baud 19200" must be specified.
- -wacom_iv, --wacom_iv
- Wacom protocol IV tablet.
- -war, --warrior
- WingMan Warrior.
- -zhen, --zhen-hua
- Zhen Hua 5-byte protocol.
AUTHORS¶
inputattach was written by Vojtech Pavlik and Arndt Schoenewald, and improved by many others; see the linuxconsole tools documentation for details.
This manual page was written by Stephen Kitt <steve@sk2.org>, for the Debian GNU/Linux system (but may be used by others).
| January 9, 2016 | inputattach |