Scroll to navigation

EXPR(1P) POSIX Programmer's Manual EXPR(1P)

PROLOG

This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the corresponding Linux manual page for details of Linux behavior), or the interface may not be implemented on Linux.

NAME

expr — evaluate arguments as an expression

SYNOPSIS

expr operand...

DESCRIPTION

The expr utility shall evaluate an expression and write the result to standard output.

OPTIONS

None.

OPERANDS

The single expression evaluated by expr shall be formed from the operand operands, as described in the EXTENDED DESCRIPTION section. The application shall ensure that each of the expression operator symbols:


(  )  |  &  =  >  >=  <  <=  !=  +  −  *  /  %  :

and the symbols integer and string in the table are provided as separate arguments to expr.

STDIN

Not used.

INPUT FILES

None.

ENVIRONMENT VARIABLES

The following environment variables shall affect the execution of expr:

Provide a default value for the internationalization variables that are unset or null. (See the Base Definitions volume of POSIX.1‐2008, Section 8.2, Internationalization Variables for the precedence of internationalization variables used to determine the values of locale categories.)
If set to a non-empty string value, override the values of all the other internationalization variables.

Determine the locale for the behavior of ranges, equivalence classes, and multi-character collating elements within regular expressions and by the string comparison operators.
Determine the locale for the interpretation of sequences of bytes of text data as characters (for example, single-byte as opposed to multi-byte characters in arguments) and the behavior of character classes within regular expressions.

Determine the locale that should be used to affect the format and contents of diagnostic messages written to standard error.
Determine the location of message catalogs for the processing of LC_MESSAGES.

ASYNCHRONOUS EVENTS

Default.

STDOUT

The expr utility shall evaluate the expression and write the result, followed by a <newline>, to standard output.

STDERR

The standard error shall be used only for diagnostic messages.

OUTPUT FILES

None.

EXTENDED DESCRIPTION

The formation of the expression to be evaluated is shown in the following table. The symbols expr, expr1, and expr2 represent expressions formed from integer and string symbols and the expression operator symbols (all separate arguments) by recursive application of the constructs described in the table. The expressions are listed in order of increasing precedence, with equal-precedence operators grouped between horizontal lines. All of the operators shall be left-associative.

Expression Description
expr1 | expr2 Returns the evaluation of expr1 if it is neither null nor zero; otherwise, returns the evaluation of expr2 if it is not null; otherwise, zero.
expr1 & expr2 Returns the evaluation of expr1 if neither expression evaluates to null or zero; otherwise, returns zero.
Returns the result of a decimal integer comparison if both arguments are integers; otherwise, returns the result of a string comparison using the locale-specific collation sequence. The result of each comparison is 1 if the specified relationship is true, or 0 if the relationship is false.
expr1 = expr2 Equal.
expr1 > expr2 Greater than.
expr1 >= expr2 Greater than or equal.
expr1 < expr2 Less than.
expr1 <= expr2 Less than or equal.
expr1 != expr2 Not equal.
expr1 + expr2 Addition of decimal integer-valued arguments.
expr1 − expr2 Subtraction of decimal integer-valued arguments.
expr1 * expr2 Multiplication of decimal integer-valued arguments.
expr1 / expr2 Integer division of decimal integer-valued arguments, producing an integer result.
expr1 % expr2 Remainder of integer division of decimal integer-valued arguments.
expr1 : expr2 Matching expression; see below.
expr ) Grouping symbols. Any expression can be placed within parentheses. Parentheses can be nested to a depth of {EXPR_NEST_MAX}.
integer An argument consisting only of an (optional) unary minus followed by digits.
string A string argument; see below.

Matching Expression

The ':' matching operator shall compare the string resulting from the evaluation of expr1 with the regular expression pattern resulting from the evaluation of expr2. Regular expression syntax shall be that defined in the Base Definitions volume of POSIX.1‐2008, Section 9.3, Basic Regular Expressions, except that all patterns are anchored to the beginning of the string (that is, only sequences starting at the first character of a string are matched by the regular expression) and, therefore, it is unspecified whether '^' is a special character in that context. Usually, the matching operator shall return a string representing the number of characters matched ('0' on failure). Alternatively, if the pattern contains at least one regular expression subexpression "[\(...\)]", the string matched by the back-reference expression "\1" shall be returned. If the back-reference expression "\1" does not match, then the null string shall be returned.

String Operand

A string argument is an argument that cannot be identified as an integer argument or as one of the expression operator symbols shown in the OPERANDS section.

The use of string arguments length, substr, index, or match produces unspecified results.

EXIT STATUS

The following exit values shall be returned:

 0
The expression evaluates to neither null nor zero.
 1
The expression evaluates to null or zero.
 2
Invalid expression.
>2
An error occurred.

CONSEQUENCES OF ERRORS

Default.

The following sections are informative.

APPLICATION USAGE

After argument processing by the shell, expr is not required to be able to tell the difference between an operator and an operand except by the value. If "$a" is '=', the command:


expr $a = '='

looks like:


expr = = =

as the arguments are passed to expr (and they all may be taken as the '=' operator). The following works reliably:


expr X$a = X=

Also note that this volume of POSIX.1‐2008 permits implementations to extend utilities. The expr utility permits the integer arguments to be preceded with a unary minus. This means that an integer argument could look like an option. Therefore, the conforming application must employ the "−−" construct of Guideline 10 of the Base Definitions volume of POSIX.1‐2008, Section 12.2, Utility Syntax Guidelines to protect its operands if there is any chance the first operand might be a negative integer (or any string with a leading minus).

EXAMPLES

The expr utility has a rather difficult syntax:

*
Many of the operators are also shell control operators or reserved words, so they have to be escaped on the command line.
*
Each part of the expression is composed of separate arguments, so liberal usage of <blank> characters is required. For example:
Invalid Valid
expr 1+2 expr 1 + 2
expr "1 + 2" expr 1 + 2
expr 1 + (2 * 3) expr 1 + \( 2 \* 3 \)

In many cases, the arithmetic and string features provided as part of the shell command language are easier to use than their equivalents in expr. Newly written scripts should avoid expr in favor of the new features within the shell; see Section 2.5, Parameters and Variables and Section 2.6.4, Arithmetic Expansion.

The following command:


a=$(expr $a + 1)

adds 1 to the variable a.

The following command, for "$a" equal to either /usr/abc/file or just file:


expr $a : '.*/\(.*\)' \| $a

returns the last segment of a pathname (that is, file). Applications should avoid the character '/' used alone as an argument; expr may interpret it as the division operator.

The following command:


expr "//$a" : '.*/\(.*\)'

is a better representation of the previous example. The addition of the "//" characters eliminates any ambiguity about the division operator and simplifies the whole expression. Also note that pathnames may contain characters contained in the IFS variable and should be quoted to avoid having "$a" expand into multiple arguments.

The following command:


expr "$VAR" : '.*'

returns the number of characters in VAR.

RATIONALE

In an early proposal, EREs were used in the matching expression syntax. This was changed to BREs to avoid breaking historical applications.

The use of a leading <circumflex> in the BRE is unspecified because many historical implementations have treated it as a special character, despite their system documentation. For example:


expr foo : ^foo     expr ^foo : ^foo

return 3 and 0, respectively, on those systems; their documentation would imply the reverse. Thus, the anchoring condition is left unspecified to avoid breaking historical scripts relying on this undocumented feature.

FUTURE DIRECTIONS

None.

SEE ALSO

Section 2.5, Parameters and Variables, Section 2.6.4, Arithmetic Expansion

The Base Definitions volume of POSIX.1‐2008, Chapter 8, Environment Variables, Section 9.3, Basic Regular Expressions, Section 12.2, Utility Syntax Guidelines

COPYRIGHT

Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2013 Edition, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 7, Copyright (C) 2013 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. (This is POSIX.1-2008 with the 2013 Technical Corrigendum 1 applied.) In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.unix.org/online.html .

Any typographical or formatting errors that appear in this page are most likely to have been introduced during the conversion of the source files to man page format. To report such errors, see https://www.kernel.org/doc/man-pages/reporting_bugs.html .

2013 IEEE/The Open Group