NAME¶

devicekit_selinux - Security Enhanced Linux Policy for the devicekit processes

DESCRIPTION¶

Security-Enhanced Linux secures the devicekit processes via flexible mandatory access control.

The devicekit processes execute with the devicekit_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep devicekit_t

ENTRYPOINTS¶

The devicekit_t SELinux type can be entered via the devicekit_exec_t file type.

The default entrypoint paths for the devicekit_t domain are the following:

/usr/bin/udisksctl, /usr/libexec/devkit-daemon

PROCESS TYPES¶

SELinux defines process types (domains) for each process running on the system

You can see the context of a process using the -Z option to ps

Policy governs the access confined processes have to files. SELinux devicekit policy is very flexible allowing users to setup their devicekit processes in as secure a method as possible.

The following process types are defined for devicekit:

devicekit_t, devicekit_power_t, devicekit_disk_t

Note: semanage permissive -a devicekit_t can be used to make the process type devicekit_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

BOOLEANS¶

SELinux policy is customizable based on least access required. devicekit policy is extremely flexible and has several booleans that allow you to manipulate the policy and run devicekit with the tightest access possible.

If you want to deny user domains applications to map a memory region as both executable and writable, this is dangerous and the executable should be reported in bugzilla, you must turn on the deny_execmem boolean. Disabled by default.

setsebool -P deny_execmem 1

If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

setsebool -P fips_mode 1

If you want to control the ability to mmap a low area of the address space, as configured by /proc/sys/vm/mmap_min_addr, you must turn on the mmap_low_allowed boolean. Disabled by default.

setsebool -P mmap_low_allowed 1

If you want to disable kernel module loading, you must turn on the secure_mode_insmod boolean. Disabled by default.

setsebool -P secure_mode_insmod 1

If you want to allow unconfined executables to make their heap memory executable. Doing this is a really bad idea. Probably indicates a badly coded executable, but could indicate an attack. This executable should be reported in bugzilla, you must turn on the selinuxuser_execheap boolean. Disabled by default.

setsebool -P selinuxuser_execheap 1

If you want to allow unconfined executables to make their stack executable. This should never, ever be necessary. Probably indicates a badly coded executable, but could indicate an attack. This executable should be reported in bugzilla, you must turn on the selinuxuser_execstack boolean. Enabled by default.

setsebool -P selinuxuser_execstack 1

MANAGED FILES¶

The SELinux process type devicekit_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.

file_type

all files on the system

FILE CONTEXTS¶

SELinux requires files to have an extended attribute to define the file type.

You can see the context of a file using the -Z option to ls

Policy governs the access confined processes have to these files. SELinux devicekit policy is very flexible allowing users to setup their devicekit processes in as secure a method as possible.

STANDARD FILE CONTEXT

SELinux defines the file context types for the devicekit, if you wanted to store files with these types in a diffent paths, you need to execute the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk.

semanage fcontext -a -t devicekit_var_log_t '/srv/mydevicekit_content(/.*)?'
restorecon -R -v /srv/mydevicekit_content

Note: SELinux often uses regular expressions to specify labels that match multiple files.

The following file types are defined for devicekit:

devicekit_disk_exec_t

- Set files with the devicekit_disk_exec_t type, if you want to transition an executable to the devicekit_disk_t domain.

Paths:

/lib/udisks2/udisksd, /lib/udev/udisks-part-id, /usr/lib/udisks2/udisksd, /usr/libexec/udisks-daemon, /usr/lib/udev/udisks-part-id, /usr/libexec/udisks2/udisksd, /usr/lib/udisks/udisks-daemon, /usr/libexec/devkit-disks-daemon

devicekit_exec_t

- Set files with the devicekit_exec_t type, if you want to transition an executable to the devicekit_t domain.

Paths:

/usr/bin/udisksctl, /usr/libexec/devkit-daemon

devicekit_power_exec_t

- Set files with the devicekit_power_exec_t type, if you want to transition an executable to the devicekit_power_t domain.

Paths:

/usr/libexec/upowerd, /usr/lib/upower/upowerd, /usr/libexec/devkit-power-daemon

devicekit_tmp_t

- Set files with the devicekit_tmp_t type, if you want to store devicekit temporary files in the /tmp directories.

devicekit_var_lib_t

- Set files with the devicekit_var_lib_t type, if you want to store the devicekit files under the /var/lib directory.

Paths:

/var/lib/udisks.*, /var/lib/upower(/.*)?, /var/lib/DeviceKit-.*

devicekit_var_log_t

- Set files with the devicekit_var_log_t type, if you want to treat the data as devicekit var log data, usually stored under the /var/log directory.

Paths:

/var/log/pm-suspend.log.*, /var/log/pm-powersave.log.*

devicekit_var_run_t

- Set files with the devicekit_var_run_t type, if you want to store the devicekit files under the /run or /var/run directory.

Paths:

/var/run/udisks.*, /var/run/devkit(/.*)?, /var/run/upower(/.*)?, /var/run/pm-utils(/.*)?, /var/run/DeviceKit-disks(/.*)?

Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.

COMMANDS¶

semanage fcontext can also be used to manipulate default file context mappings.

semanage permissive can also be used to manipulate whether or not a process type is permissive.

semanage module can also be used to enable/disable/install/remove policy modules.

semanage boolean can also be used to manipulate the booleans

system-config-selinux is a GUI tool available to customize SELinux policy settings.

AUTHOR¶

This manual page was auto-generated using sepolicy manpage .

SEE ALSO¶

selinux(8), devicekit(8), semanage(8), restorecon(8), chcon(1), sepolicy(8), setsebool(8), devicekit_disk_selinux(8), devicekit_disk_selinux(8), devicekit_power_selinux(8), devicekit_power_selinux(8)