COMMON OPTIONS¶

-h, --help

Prints the specific help information for the given command.

--proxy=PROXY

Uses an HTTP proxy. The PROXY name has the format hostname:port.

--proxyuser=PROXYUSERNAME

Gives the username to use to authenticate to the HTTP proxy.

--proxypass=PROXYPASSWORD

Gives the password to use to authenticate to the HTTP proxy.

--noproxy=NOPROXY

Specifies a list of domain suffixes which should bypass the HTTP proxy.

REGISTER OPTIONS¶

The register command registers a new system to the subscription management service.

--username=USERNAME

Gives the username for the account which is registering the system; this user account is usually tied to the user account for the content delivery system which supplies the content. Optional, for user-based authentication.

--password=PASSWORD

Gives the user account password.

--token=TOKEN

Token to use when authorizing against the server.

--serverurl=SERVER_HOSTNAME

Passes the name of the subscription service with which to register the system. The default value, if this is not given, is the Customer Portal Subscription Management service, subscription.rhsm.redhat.com. If there is an on-premise subscription service such as Subscription Asset Manager, this parameter can be used to submit the hostname of the subscription service. For Subscription Asset Manager, if the Subscription Manager tool is configured with the Subscription Asset Manager RPM, then the default value for the --serverurl parameter is for the on-premise Subscription Asset Manager server.

--baseurl=https://CONTENT_SERVICE:PORT/PREFIX

Passes the name of the content delivery service to configure the yum service to use to pull down packages. If there is an on-premise subscription service such as Subscription Asset Manager or CloudForms System Engine, this parameter can be used to submit the URL of the content repository, in the form https://server_name:port/prefix. PREFIX in particular depends on the service type. For example, https://sam.example.com:8088/sam is the baseurl for a SAM service. https://sat6.example.com/pulp/repos is the baseurl for a Satellite 6 service with the hostname sat6.example.com . https://cdn.redhat.com is the baseurl for the Red Hat CDN.

--name=SYSTEM_NAME

Sets the name of the system to register. This defaults to the hostname.

--consumerid=CONSUMERID

References an existing system inventory ID to resume using a previous registration for this system. The ID is used as an inventory number for the system in the subscription management service database. If the system's identity is lost or corrupted, this option allows it to resume using its previous identity and subscriptions.

--activationkey=KEYS

Gives a comma-separated list of product keys to use to redeem or apply specific subscriptions to the system. This is used for preconfigured systems which may already have products installed. Activation keys are issued by an on-premise subscription management service, such as Subscription Asset Manager.

When the --activationkey option is used, it is not necessary to use the --username and --password options, because the authentication information is implicit in the activation key.

For example:

subscription-manager register --org="IT Dept" --activationkey=1234abcd

--auto-attach

Automatically attaches compatible subscriptions to this system.

--servicelevel=LEVEL

Sets the preferred service level to use with subscriptions added to the system. Service levels are commonly premium, standard, and none, though other levels may be available depending on the product and the contract.

--force

Registers the system even if it is already registered. Normally, any register operations will fail if the system is already registered. With --force, the existing system entry is unregistered first, all of its subscriptions are returned to the pool, and then the system is registered as a new entry.

--org=ORG

Assigns the system to an organization. Infrastructures which are managed on-site may be multi-tenant, meaning that there are multiple organizations within one customer unit. A system may be assigned manually to one of these organizations. When a system is registered with the Customer Portal, this is not required. When a system is registered with an on-premise application such as Subscription Asset Manager, this argument is required, unless there is only a single organization configured.

--environment=ENV

Registers the system to an environment within an organization.

--release=VERSION

Shortcut for "release --set=VERSION"

UNREGISTER OPTIONS¶

The unregister command removes a system's subscriptions and removes it from the subscription management service.

This command has no options.

ATTACH OPTIONS¶

The attach command applies a specific subscription to the system.

--auto

Automatically attaches the best-matched compatible subscription or subscriptions to the system. This is the default unless --pool or --file are used.

--pool=POOLID

Gives the ID for the subscriptions pool (collection of products) to attach to the system. This overrides the default of --auto.

--file=FILE

Specifies a file from which to read whitespace-delimited pool IDs. If FILE is "-", the pool IDs will be read from stdin. This overrides the default of --auto.

--quantity=NUMBER

Attaches a specified number of subscriptions to the system. Subscriptions may have certain limits on them, like the number of sockets on the system or the number of allowed virtual guests. It is possible to attach multiple subscriptions (or stacking subscriptions) to cover the number of sockets, guests, or other characteristics. May not be used with an auto-attach.

--servicelevel=LEVEL

Sets the preferred service level to use with subscriptions automatically attached to the system. Service levels are commonly premium, standard, and none, though other levels may be available depending on the product and the contract. This option cannot be used when attaching specific pools via --pool or --file.

AUTO-ATTACH OPTIONS¶

The auto-attach command sets whether the ability to check, attach, and update subscriptions occurs automatically on the system. Auto-attaching subscriptions checks the currently-installed products, attached subscriptions, and any changes in available subscriptions every four hours using the rhsmcertd daemon.

--enable

Enables the auto-attach option for the system. If there is any change in the subscriptions for the system, any subscriptions expire, or any new products are installed, then subscription-manager detects the changes and automatically attaches the appropriate subscriptions so that the system remains covered.

--disable

Disables the auto-attach option for the system. If auto-attach is disabled, then any changes in installed products or subscriptions for the system (including expired subscriptions) must be addressed manually by the administrator.

--show

Shows whether auto-attach is enabled on the systems.

REMOVE OPTIONS¶

The remove command removes a subscription from the system. (This does not uninstall the associated products.)

--serial=SERIALNUMBER

Gives the serial number of the subscription certificate for the specific product to remove from the system. Subscription certificates attached to a system are in a certificate, in /etc/pki/entitlement/<serial_number>.pem. To remove multiple subscriptions, use the --serial option multiple times.

--pool=POOLID

Removes all subscription certificates for the specified pool id from the system. To remove multiple sets of subscriptions, use the --pool option multiple times.

--all

Removes all of the subscriptions attached to a system.

RELEASE OPTIONS¶

The release command sets a sticky OS version to use when installing or updating packages. This sets a preference for the minor version of the OS, such as 6.2 or 6.3. This can prevent unplanned or unsupported operating system version upgrades when an IT environment must maintain a certified configuration.

--list

Lists the available OS versions. If a release preference is not set, then there is a message saying it is not set.

--set=RELEASE

Sets the minor (Y-stream) release version to use, such as 6.3.

--unset

Removes any previously set release version preference.

ADDONS OPTIONS¶

The addons command displays the current configured addons system purpose attribute preference for products installed on the system. For example, if the addons preference is ADDON1, then a subscription with a ADDON1 addon is selected when auto-attaching subscriptions to the system.

--show

Shows the system's current addons preference. If a addons is not set, then there is a message saying it is not set.

--list

Lists the available addons system purpose values.

--username=USERNAME

Gives the username for the account to use to connect to the organization account [Use with --list when unregistered].

--password=PASSWORD

Gives the user account password [Use with --list when unregistered].

--token=TOKEN

Token to use when authorizing against the server [Use with --list when unregistered].

--add=ADDON

Addon to add to the list of requested addons for this system

--remove=ADDON

Remove the addon from the list of requested addons.

--unset

Removes all addons from the list of requested addons.

--org=ORG

Identifies the organization for which the addons applies.

ROLE OPTIONS¶

The role command displays the current configured role preference for products installed on the system. For example, if the role preference is "Red Hat Enterprise Linux Server", then a subscription with a "Red Hat Enterprise Linux Server" role is selected when auto-attaching subscriptions to the system.

--show

Shows the system's current role preference. If a role is not set, then there is a message saying it is not set.

--list

Lists the available role system purpose values.

--username=USERNAME

Gives the username for the account to use to connect to the organization account [Use with --list when unregistered].

--password=PASSWORD

Gives the user account password [Use with --list when unregistered].

--token=TOKEN

Token to use when authorizing against the server [Use with --list when unregistered].

--set=ROLE

Role to apply to this system

--unset

Removes any previously set role preference.

--org=ORG

Identifies the organization for which the role applies.

SERVICE-LEVEL OPTIONS¶

The service-level command displays the current configured service level preference for products installed on the system. For example, if the service-level preference is standard, then a subscription with a standard service level is selected when auto-attaching subscriptions to the system.

--serverurl=SERVER_URL

Server URL in the form of https://hostname:port/prefix

--insecure

Do not check the server SSL certificate against available certificate authorities

--show

Shows the system's current service-level preference. If a service level is not set, then there is a message saying it is not set.

--list

Lists the available service levels.

--username=USERNAME

Gives the username for the account to use to connect to the organization account [Use with --list when unregistered].

--password=PASSWORD

Gives the user account password [Use with --list when unregistered].

--token=TOKEN

Token to use when authorizing against the server [Use with --list when unregistered].

--set=SERVICE_LEVEL

Service level to apply to this system

--unset

Removes any previously set service-level preference.

USAGE OPTIONS¶

The usage command displays the current configured usage preference for products installed on the system. For example, if the usage preference is "Production", then a subscription with a "Production" usage is selected when auto-attaching subscriptions to the system.

--show

Shows the system's current usage preference. If a usage is not set, then there is a message saying it is not set.

--list

Lists the available usage system purpose values.

--username=USERNAME

Gives the username for the account to use to connect to the organization account [Use with --list when unregistered].

--password=PASSWORD

Gives the user account password [Use with --list when unregistered].

--token=TOKEN

Token to use when authorizing against the server [Use with --list when unregistered].

--set=USAGE

Usage to apply to this system

--unset

Removes any previously set usage preference.

--org=ORG

Identifies the organization for which the usage applies.

IMPORT OPTIONS¶

The import command imports and applies a subscription certificate for the system which was generated externally, such as in the Customer Portal, and then copied over to the system. Importing can be necessary if a system is preconfigured in the subscription management service or if it is offline or unable to access the subscription management service but it has the proper, relevant subscriptions attached to the system.

--certificate=CERTIFICATE_FILE

Points to a certificate PEM file which contains the subscription certificate. This can be used multiple times to import multiple subscription certificates.

REDEEM OPTIONS¶

The redeem command is used for systems that are purchased from third-party vendors that include a subscription. The redemption process essentially auto-attaches the preselected subscription that the vendor supplied to the system.

--email=EMAIL

Gives the email account to send the redemption notification message to.

--locale=LOCALE

Sets the locale to use for the message. If none is given, then it defaults to the local system's locale.

LIST OPTIONS¶

The list command lists all of the subscriptions that are compatible with a system. The options allow the list to be filtered by subscriptions that are used by the system or unused subscriptions that are available to the system.

--afterdate=YYYY-MM-DD

Shows pools that are active on or after the given date. This is only used with the --available option.

--all

Lists all possible subscriptions that have been purchased, even if they don't match the architecture of the system. This is used with the --available option.

--available

Lists available subscriptions which are not yet attached to the system.

--consumed

Lists all of the subscriptions currently attached to the system.

--installed

Lists products which are currently installed on the system which may (or may not) have subscriptions associated with them, as well as products with attached subscriptions which may (or may not) be installed. (default)

--ondate=YYYY-MM-DD

Sets the date to use to search for active and available subscriptions. The default (if not explicitly passed) is today's date; using a later date looks for subscriptions which will be active then. This is only used with the --available option.

--no-overlap

Shows pools which provide products that are not already covered; only used with --available option.

--match-installed

Shows only subscriptions matching products that are currently installed; only used with --available option.

--matches=SEARCH

Limits the output of --installed, --available and --consumed to only subscriptions or products which contain SEARCH in the subscription or product information, varying with the list requested and the server version.
SEARCH may contain the wildcards ? or * to match a single character or zero or more characters, respectively. The wildcard characters may be escaped with a backslash to represent a literal question mark or asterisk. Likewise, to represent a backslash, it must be escaped with another backslash.

--pool-only

Limits the output of --available and --consumed such that only the pool IDs are displayed. No labels or errors will be printed if this option is specified.

REFRESH OPTIONS¶

The refresh command pulls the latest subscription data from the server. Normally, the system polls the subscription management service at a set interval (4 hours by default) to check for any changes in the available subscriptions. The refresh command checks with the subscription management service right then, outside the normal interval. Use of the refresh command will clear caches related to the content access mode of the system and allow the system to retrieve fresh data as necessary.

--force

Force regeneration of entitlement certificates on the server before these certificates are pulled from the server.

ENVIRONMENTS OPTIONS¶

The environments command lists all of the environments that have been configured for an organization. This command is only used for organizations which have a locally-hosted subscription or content service of some kind, like Subscription Asset Manager. The concept of environments -- and therefore this command -- have no meaning for environments which use the Customer Portal Subscription Management services.

--username=USERNAME

Gives the username for the account to use to connect to the organization account.

--password=PASSWORD

Gives the user account password.

--token=TOKEN

Token to use when authorizing against the server.

--org=ORG

Identifies the organization for which to list the configured environments.

REPOS OPTIONS¶

The repos Lists all repositories available to a system. This command can also enable and disable access to those repositories.

--list

Lists all of the repositories that are provided by the content service used by the system.

--list-enabled

Lists all of the enabled repositories that are provided by the content service used by the system.

--list-disabled

Lists all of the disabled repositories that are provided by the content service used by the system.

--enable=REPO_ID

Enables the specified repository, which is made available by the content sources identified in the system subscriptions. To enable multiple repositories, use this argument multiple times. Wild cards * and ? are supported.

--disable=REPO_ID

Disables the specified repository, which is made available by the content sources identified in the system subscriptions. To disable multiple repositories, use this argument multiple times. Wild cards * and ? are supported.

ORGS OPTIONS¶

The orgs command lists all of the organizations which are available to the specified user account. A multi-tenant infrastructure may have multiple organizations within a single customer, and users may be restricted to access only a subset of the total number of organizations.

--username=USERNAME

Gives the username for the account to use to connect to the organization account.

--password=PASSWORD

Gives the user account password.

--token=TOKEN

Token to use when authorizing against the server.

--serverurl=SERVER_HOSTNAME

Passes the name of the subscription service to use to list all available organizations. The orgs command will list all organizations for the specified service for which the user account is granted access. The default value, if this is not given, is the Customer Portal Subscription Management service, https://subscription.rhsm.redhat.com:443. If there is an on-premise subscription service such as Subscription Asset Manager, this parameter can be used to submit the hostname of the subscription service, in the form [protocol://]servername[:port][/prefix]. For Subscription Asset Manager, if the Subscription Manager tool is configured with the Subscription Asset Manager RPM, then the default value for the --serverurl parameter is for the on-premise Subscription Asset Manager server.

PLUGIN OPTIONS¶

The plugins command lists the available subscription-manager plugins.

--list

List the available subscription-manager plugins.

--listslots

List the available plugin slots

--listhooks

List the available plugin slots and the hooks that handle them.

--verbose

Show additional info about the plugins, such as the plugin configuration values.

REPO-OVERRIDE OPTIONS¶

The repo-override command allows the user to manage custom content repository settings

--repo

The repository to modify (can be specified more than once)

--add=NAME:VALUE

Adds a named override with the provided value to repositories specified with the --repo option

--remove=NAME

Removes a named override from the repositories specified with the --repo option

--remove-all

Removes all overrides from repositories specified with the --repo option

--list

Lists all overrides from repositories specified with the --repo option

IDENTITY OPTIONS¶

The identity command handles the UUID of a system, which identifies the system to the subscription management service after registration. This command can simply return the UUID or it can be used to restore the registration of a previously-registered system to the subscription management service.

--regenerate

Requests that the subscription management service issue a new identity certificate for the system, using an existing UUID in the original identity certificate. If this is used alone, then the identity command also uses the original identity certificate to bind to the subscription management service, using certificate-based authentication.

--username=USERNAME

Gives the username for the account which is registering the system; this user account is usually tied to the user account for the content delivery system which supplies the content. Optional, for user-based authentication.

--password=PASSWORD

Gives the user account password. Optional, for user-based authentication.

--token=TOKEN

Token to use when authorizing against the server.

--force

Regenerates the identity certificate for the system using username/password or token authentication. This is used with the --regenerate option. --regenerate alone will use an existing identity certificate to authenticate to the subscription management service. If the certificate is missing or corrupted or in other circumstances, then it may be better to use user authentication rather than certificate-based authentication. In that case, the --force option requires the username or password or token to be given either as an argument or in response to a prompt.

FACTS OPTIONS¶

The facts command lists the system information, like the release version, number of CPUs, and other architecture information.

--list

Lists the system information. These are simple attribute: value pairs that reflect much of the information in the /etc/sysconfig directory

cpu.architecture: x86_64
cpu.core(s)_per_socket: 1
cpu.cpu(s): 2
cpu.cpu_family: 6
cpu.cpu_mhz: 1861.776
cpu.cpu_op-mode(s): 64-bit
cpu.cpu_socket(s): 2
cpu.hypervisor_vendor: KVM
cpu.model: 2
cpu.numa_node(s): 1
cpu.numa_node0_cpu(s): 0,1
cpu.stepping: 3
cpu.thread(s)_per_core: 1
cpu.vendor_id: GenuineIntel
cpu.virtualization_type: full
distribution.id: Santiago
distribution.name: Red Hat Enterprise Linux Workstation
distribution.version: 6.1
----
    

--update

Updates the system information. This is particularly important whenever there is a hardware change (such as adding a CPU) or a system upgrade because these changes can affect the subscriptions that are compatible with the system.

CLEAN OPTIONS¶

The clean command removes all of the subscription and identity data from the local system without affecting the system information in the subscription management service. This means that any of the subscriptions applied to the system are not available for other systems to use. The clean command is useful in cases where the local subscription information is corrupted or lost somehow, and the system will be re-registered using the register --consumerid=EXISTING_ID command.

This command has no options.

CONFIG OPTIONS¶

The config command changes the rhsm.conf configuration file used by Subscription Manager. Almost all of the connection information used by Subscription Manager to access the subscription management service, content server, and any proxies is set in the configuration file, as well as general configuration parameters like the frequency Subscription Manager checks for subscriptions updates. There are major divisions in the rhsm.conf file, such as [server] which is used to configure the subscription management service. When changing the Subscription Manager configuration, the settings are identified with the format section.name and then the new value. For example:

server.hostname=newsubscription.example.com

--list

Prints the current configuration for Subscription Manager.

--remove=section.name

Deletes the current value for the parameter without supplying a new parameter. A blank value tells Subscription Manager to use service default values for that parameter. If there are no defaults, then the feature is ignored.

--section.name=VALUE

Sets a parameter to a new, specified value. This is commonly used for connection settings:

* server.hostname (subscription management service)

* server.proxy

* server.proxy_port

* server.proxy_user

* server.proxy_password

* rhsm.baseurl (content server)

* rhsm.certFrequency

VERSION OPTIONS¶

The version command displays information about the current Subscription Manager package, the subscription service the system is registered to (if it is currently registered), and the subscription management server that the system is configured to use. For example:

[root@server ~]# subscription-manager version
server type: Red Hat Subscription Management
subscription management server: 0.9.18-1
subscription management rules: 5.9
subscription-manager: 1.12.1-1.git.28.5cd97a5.fc20
python-rhsm: 1.11.4-1.git.1.2f38ded.fc20

This command has no options.

STATUS OPTIONS¶

The status command shows the current status of the products and attached subscriptions for the system. If some products are not fully covered or subscriptions have expired, then the status command shows why subscriptions are not current and returns an error code.

[root@server ~]# subscription-manager status
+-------------------------------------------+


     System Status Details
+-------------------------------------------+
Overall Status: Current

--ondate=DATE

Shows the system status for a specific date in the future. The format of the date is YYYY-MM-DD.

[root@server ~]# subscription-manager status --ondate=2014-01-01
+-------------------------------------------+


     System Status Details
+-------------------------------------------+
Overall Status: Insufficient

DEPRECATED COMMANDS¶

As the structures of subscription configuration have changed, some of the original management commands have become obsolete. These commands have been replaced with updated commands.

subscribe

This has been replaced with attach. A similar registration option, --subscribe, has also be replaced with --auto-attach.

unsubscribe

This has been replaced with remove.

activate

This has been replaced with redeem.

REGISTERING AND UNREGISTERING MACHINES¶

A system is either registered to a subscription management service -- which makes all of the subscriptions available to the system -- or it is not registered. Unregistered systems necessarily lack valid software subscriptions because there is no way to record that the subscriptions have been used nor any way to renew them.

The default subscription management service in the Subscription Manager configuration is the Customer Portal Subscription Management service. The configuration file can be edited before the system is registered to point to an on-premise subscription management service like Subscription Asset Manager.

Systems are usually registered to a subscription management service as part of their initial configuration, such as the firstboot or kickstart process. However, systems can be registered manually after they are configured, can be removed from a content service, or re-registered.

If a system has never been registered (not even during firstboot), then the register command will register the system with whatever subscription management service is configured in the /etc/rhsm/rhsm.conf file. This command requires, at a minimum, the username and password or token for an account to connect to the subscription management service. If the credentials aren't passed with the command, then subscription-manager prompts for the username and password interactively.

When there is a single organization or when using the Customer Portal Subscription Management service, all that is required is the username/password set or the token is used. For example:

subscription-manager register --username=admin --password=secret or subscription-manager register --token=eyJhbGciOiJSUzI1NiIsI ... stGc_2bFDQC8CENEOo

With on-premise subscription services, such as Subscription Asset Manager, the infrastructure is more complex. The local administrator can define independent groups called organizations which represent physical or organizational divisions (--org). Those organizations can be subdivided into environments (--environment). Optionally, the information about what subscription service (--serverurl) and content delivery network (--baseurl) to use for the system registration can also be passed (which overrides the Red Hat Subscription Manager settings). The server and content URLs are usually configured in the Subscription Manager configuration before registering a system.

subscription-manager register --username=admin --password=secret
--org="IT Dept" --environment="local dev" --serverurl=local-cloudforms.example.com --baseurl=https://local-cloudforms.example.com:8088/cfFe

If a system is in a multi-tenant environment and the organization is not provided with the registration request, registration fails with a remote server error. In the rhsm.log, there will be errors about being unable to load the owners interface.

If a system is registered and then somehow its subscription information is lost -- a drive crashes or the certificates are deleted or corrupted -- the system can be re-registered, with all of its subscriptions restored, by registering with the existing ID.

subscription-manager register --username=admin
--password=secret --consumerid=1234abcd

A system uses an SSL client certificate (its identity certificate) to authenticate to the subscriptions system to check for updates or changes to subscriptions. If the identity certificate is lost or corrupted, it can be regenerated using the identity command.

subscription-manager identity --regenerate

Using the --force option will prompt for the username and password for the account, if one isn't given, and then return the new inventory ID and the hostname of the registered system.

subscription-manager identity --force
Username: jsmith
Password:
eff9a4c9-3579-49e5-a52f-83f2db29ab52 server.example.com

A system is unregistered and removed from the subscription management service simply by running the unregister command. Unregistering a system and removing its attached subscriptions can free up subscriptions when a system is taken offline or moved to a different department.

subscription-manager unregister

An option with registration, --auto-attach, will automatically attach the subscriptions pool which best matches the system architecture and configuration to the newly-registered system. This option attaches subscriptions as part of the registration process, rather than separately managing subscriptions.

subscription-manager register --username=admin --password=secret
--auto-attach

Auto-attach also supports an option to set a preferred service level with the selected subscriptions, the --servicelevel option. In this case, the --servicelevel option sets a preference that helps the auto-attach process select appropriate subscriptions. For example, if the preferred service level for a production server is premium, and there are three matching subscriptions with different service levels (none, standard, and premium), the auto-attach process selects the subscription which offers a premium service level.

subscription-manager register --username=admin --password=secret
--auto-attach --servicelevel=premium

LISTING, ATTACHING, AND REMOVING SUBSCRIPTIONS FOR PRODUCTS¶

A subscription is essentially the right to install, use, and receive updates for a Red Hat product. (Sometimes multiple individual software products are bundled together into a single subscription.) When a system is registered, the subscription management service is aware of the system and has a list of all of the possible product subscriptions that the system can install and use. A subscription is applied to a system when the system is attached to the subscription pool that makes that product available. A system releases or removes that subscription (meaning, it removes that subscription so that another system can use that subscription count).

list command shows you what subscriptions are available specifically to the system (meaning subscriptions which are active, have available quantities, and match the hardware and architecture) or all subscriptions for the organization. Using the --ondate option shows subscriptions that are or will be active at a specific time (otherwise, it shows subscriptions which are active today).

subscription-manager list --available --ondate=2012-01-31
+-------------------------------------------+


    Available Subscriptions
+-------------------------------------------+
Subscription Name:	Red Hat Enterprise Linux
SKU:			SYS0395
Pool Id:		8a85f981302cbaf201302d899adf05a9
Quantity:		249237
Service Level:		None
Service Type:		None
Multi-Entitlement:	No
Starts:			01/01/2021
Ends:			01/01/2022
Machine Type:		physical

The list command can also be used to show what products you currently have installed, as a way of tracking what products you have versus what subscriptions you have on the system.

subscription-manager list --installed
+-------------------------------------------+


    Installed Product Status
+-------------------------------------------+
ProductName:	Red Hat Enterprise Linux Server
Product ID:	69
Version: 	6.3
Arch:		x86_64
Status:		Subscribed
Started:	07/26/2012
Ends:		08/31/2015

The list can be filtered to only include products or subscriptions that match the query string provided to --matches option.

subscription-manager list --installed --matches="*Server*"
+-------------------------------------------+


    Installed Product Status
+-------------------------------------------+
ProductName:	Red Hat Enterprise Linux Server
Product ID:	69
Version: 	6.3
Arch:		x86_64
Status:		Subscribed
Started:	07/26/2012
Ends:		08/31/2015

Attaching a subscription requires the ID for the subscription pool (the --pool option). For example:

subscription-manager attach
--pool=ff8080812bc382e3012bc3845da100d2

As with the register command, the system can be auto-attached to the best-fitting subscriptions. This is the default action and is equivalent to using the --auto option:

subscription-manager attach

Auto-attach also supports an option to set a preferred service level with the selected subscriptions, the --servicelevel option. In this case, the --servicelevel option sets a preference that helps the auto-attach process select appropriate subscriptions. For example, if the preferred service level for a production server is premium, and there are three matching subscriptions with different service levels (none, standard, and premium), the auto-attach process selects the subscription which offers a premium subscription.

subscription-manager attach --servicelevel=premium

Some subscriptions define a count based on attributes of the system itself, like the number of sockets or the number of virtual guests on a host. You can combine multiple subscriptions together to cover the count. For example, if there is a four socket server, you can use two subscriptions for "RHEL Server for Two Sockets" to cover the socket count. To specify the number of subscriptions to use, use the --quantity option. For example:

subscription-manager attach
--pool=ff8080812bc382e3012bc3845da100d2
--quantity=2

Removing subscription from a system releases the subscription back into the pool. The system remains registered with the subscription management service. Each product has an identifying X.509 certificate installed with it. To remove a subscription for a specific product, specify the serial number (or numbers, in multiple --serial options) of the certificate:

subscription-manager remove --serial=1128750306742160

Giving the remove command with the --all option removes every subscription the system has used.

REDEEMING EXISTING SUBSCRIPTIONS¶

Sometimes, a system may come preconfigured with products and subscriptions. Rather than attaching a pool and claiming a subscription, this system simply needs to redeem its existing subscriptions.

After registration, subscriptions on preconfigured systems can be claimed using the redeem command, which essentially auto-attaches the system to its preexisting subscriptions.

subscription-manager redeem --email=admin@example.com --org="IT Dept"

VIEWING LOCAL SUBSCRIPTION & CONTENT PROVIDER INFORMATION¶

Red Hat has a hosted environment, through the Customer Portal, that provides centralized access to subscription management and content repositories. However, organizations can use other tools -- like Subscription Manager -- for content hosting and subscription management. With a local content provider, the organization, environments, repositories, and other structural configuration is performed in the content provider. Red Hat Subscription Manager can be used to display this information, using the environments, orgs, and repos commands.

subscription-manager repos --list
subscription-manager environments --username=jsmith
--password=secret --org=prod


 or


 subscription-manager environments --token=eyJhbGciOiJSUzI1NiIsI ... stGc_2bFDQC8CENEOo --org=prod
subscription-manager orgs --username=jsmith
--password=secret
or
subscription-manager orgs --token=eyJhbGciOiJSUzI1NiIsI ... stGc_2bFDQC8CENEOo

CHANGING SUBSCRIPTION MANAGER CONFIGURATION¶

The Subscription Manager CLI and GUI both use the /etc/rhsm/rhsm.conf file for configuration, including what content and subscription management services to use and management settings like auto-attaching. This configuration file can be edited directly, or it can be edited using the config command. Parameters and values are passed as arguments with the config command in the format --section.parameter=value , where section is the configuration section in the file: server, rhsm, rhsmcertd or logging.

For example, to change the hostname of the subscription management service host:

subscription-manager config --server.hostname=myserver.example.com

The entries in the logging section are somewhat special. The keys in this section are a name of a logger. The values are the logging level.

Valid levels are one of: DEBUG , INFO , WARNING , ERROR , or CRITICAL

Valid logger names are the full module path of any Subscription Manager module. For example: subscription_manager or subscription_manager.managercli

There are three main top-level loggers: subscription_manager, rhsm, and rhsm-app. All logger names begin with one of the above.

To set the default log level for all loggers (that are not otherwise set in the logging section), edit the default_log_level key in /etc/rhsm/rhsm.conf

UPDATING FACTS¶

The information about a system, such as its hardware and CPU, its operating system versions, and memory, are collected by Subscription Manager in a list of facts. Subscription Manager uses these facts to determine what purchased subscriptions are compatible with the system. Whenever these facts change (such as installing an additional CPU), the facts can be updated immediately using the facts command.

subscription-manager facts --update

The collected facts can also be overridden by creating a JSON file in the /etc/rhsm/facts/ directory. These have simple formats that define a fact and value:

{"fact1": "value1","fact2": "value2"}

Any fact override file must have a .facts extension.

When these fact files are added, running the facts command will update the collected facts with the new, manual facts or values.

SUBSCRIPTIONS AND KICKSTART¶

The subscription-manager tool can be run as a post-install script as part of the kickstart installation process. This allows subscription management (registering and applying subscriptions) to be automated along with installation. For example:

%post --log=/root/ks-post.log
/usr/sbin/subscription-manager register --username admin --password secret --org 'east colo' --auto-attach --servicelevel=premium --force