BEGIN/END/ERROR¶

The probe points begin and end are defined by the translator to refer to the time of session startup and shutdown. All "begin" probe handlers are run, in some sequence, during the startup of the session. All global variables will have been initialized prior to this point. All "end" probes are run, in some sequence, during the normal shutdown of a session, such as in the aftermath of an exit () function call, or an interruption from the user. In the case of an error-triggered shutdown, "end" probes are not run. There are no target variables available in either context.

If the order of execution among "begin" or "end" probes is significant, then an optional sequence number may be provided:

begin(N)
end(N)

The number N may be positive or negative. The probe handlers are run in increasing order, and the order between handlers with the same sequence number is unspecified. When "begin" or "end" are given without a sequence, they are effectively sequence zero.

The error probe point is similar to the end probe, except that each such probe handler run when the session ends after errors have occurred. In such cases, "end" probes are skipped, but each "error" probe is still attempted. This kind of probe can be used to clean up or emit a "final gasp". It may also be numerically parametrized to set a sequence.

NEVER¶

The probe point never is specially defined by the translator to mean "never". Its probe handler is never run, though its statements are analyzed for symbol / type correctness as usual. This probe point may be useful in conjunction with optional probes.

SYSCALL and ND_SYSCALL¶

The syscall.* and nd_syscall.* aliases define several hundred probes, too many to detail here. They are of the general form:

syscall.NAME


nd_syscall.NAME


syscall.NAME.return


nd_syscall.NAME.return

Generally, a pair of probes are defined for each normal system call as listed in the syscalls(2) manual page, one for entry and one for return. Those system calls that never return do not have a corresponding .return probe. The nd_* family of probes are about the same, except it uses non-DWARF based searching mechanisms, which may result in a lower quality of symbolic context data (parameters), and may miss some system calls. You may want to try them first, in case kernel debugging information is not immediately available.

Each probe alias provides a variety of variables. Looking at the tapset source code is the most reliable way. Generally, each variable listed in the standard manual page is made available as a script-level variable, so syscall.open exposes filename, flags, and mode. In addition, a standard suite of variables is available at most aliases:

argstr

A pretty-printed form of the entire argument list, without parentheses.

name

The name of the system call.

retval

For return probes, the raw numeric system-call result.

retstr

For return probes, a pretty-printed string form of the system-call result.

As usual for probe aliases, these variables are all initialized once from the underlying $context variables, so that later changes to $context variables are not automatically reflected. Not all probe aliases obey all of these general guidelines. Please report any bothersome ones you encounter as a bug. Note that on some kernel/userspace architecture combinations (e.g., 32-bit userspace on 64-bit kernel), the underlying $context variables may need explicit sign extension / masking. When this is an issue, consider using the tapset-provided variables instead of raw $context variables.

If debuginfo availability is a problem, you may try using the non-DWARF syscall probe aliases instead. Use the nd_syscall. prefix instead of syscall. The same context variables are available, as far as possible.

nd_syscall probes on kernels that use syscall wrappers to pass arguments via pt_regs (currently 4.17+ on x86_64 and 4.19+ on aarch64) support syscall argument writing when guru mode is enabled. If a probe syscall parameter is modified in the probe body then immediately before the probe exits the parameter's current value will be written to pt_regs. This overwrites the previous value. nd_syscall probes also include two parameters for each of the syscall's string parameters. One holds a quoted version of the string passed to the syscall. The other holds an unquoted version of the string intended to be used when modifying the parameter. If the probe modifies the unquoted string variable then as the probe is about to exit the contents of this variable will be written to the user space buffer passed to the syscall. It is the user's responsibility to ensure that this buffer is large enough to hold the modified string and that it is located in a writable memory segment.

TIMERS¶

There are two main types of timer probes: "jiffies" timer probes and time interval timer probes.

Intervals defined by the standard kernel "jiffies" timer may be used to trigger probe handlers asynchronously. Two probe point variants are supported by the translator:

timer.jiffies(N)
timer.jiffies(N).randomize(M)

The probe handler is run every N jiffies (a kernel-defined unit of time, typically between 1 and 60 ms). If the "randomize" component is given, a linearly distributed random value in the range [-M..+M] is added to N every time the handler is run. N is restricted to a reasonable range (1 to around a million), and M is restricted to be smaller than N. There are no target variables provided in either context. It is possible for such probes to be run concurrently on a multi-processor computer.

Alternatively, intervals may be specified in units of time. There are two probe point variants similar to the jiffies timer:

timer.ms(N)
timer.ms(N).randomize(M)

Here, N and M are specified in milliseconds, but the full options for units are seconds (s/sec), milliseconds (ms/msec), microseconds (us/usec), nanoseconds (ns/nsec), and hertz (hz). Randomization is not supported for hertz timers.

The actual resolution of the timers depends on the target kernel. For kernels prior to 2.6.17, timers are limited to jiffies resolution, so intervals are rounded up to the nearest jiffies interval. After 2.6.17, the implementation uses hrtimers for tighter precision, though the actual resolution will be arch-dependent. In either case, if the "randomize" component is given, then the random value will be added to the interval before any rounding occurs.

Profiling timers are also available to provide probes that execute on all CPUs at the rate of the system tick (CONFIG_HZ) or at a given frequency (hz). On some kernels, this is a one-concurrent-user-only or disabled facility, resulting in error -16 (EBUSY) during probe registration.

timer.profile.tick
timer.profile.freq.hz(N)

Full context information of the interrupted process is available, making this probe suitable for a time-based sampling profiler.

It is recommended to use the tapset probe timer.profile rather than timer.profile.tick. This probe point behaves identically to timer.profile.tick when the underlying functionality is available, and falls back to using perf.sw.cpu_clock on some recent kernels which lack the corresponding profile timer facility.

Profiling timers with specified frequencies are only accurate up to around 100 hz. You may need to provide a larger value to achieve the desired rate.

Note that if a timer probe is set to fire at a very high rate and if the probe body is complex, succeeding timer probes can get skipped, since the time for them to run has already passed. Normally systemtap reports missed probes, but it will not report these skipped probes.

DWARF¶

This family of probe points uses symbolic debugging information for the target kernel/module/program, as may be found in unstripped executables, or the separate debuginfo packages. They allow placement of probes logically into the execution path of the target program, by specifying a set of points in the source or object code. When a matching statement executes on any processor, the probe handler is run in that context.

Probe points in the DWARF family can be identified by the target kernel module (or user process), source file, line number, function name, or some combination of these.

Here is a list of DWARF probe points currently supported:

kernel.function(PATTERN)
kernel.function(PATTERN).call
kernel.function(PATTERN).callee(PATTERN)
kernel.function(PATTERN).callee(PATTERN).return
kernel.function(PATTERN).callee(PATTERN).call
kernel.function(PATTERN).callees(DEPTH)
kernel.function(PATTERN).return
kernel.function(PATTERN).inline
kernel.function(PATTERN).label(LPATTERN)
module(MPATTERN).function(PATTERN)
module(MPATTERN).function(PATTERN).call
module(MPATTERN).function(PATTERN).callee(PATTERN)
module(MPATTERN).function(PATTERN).callee(PATTERN).return
module(MPATTERN).function(PATTERN).callee(PATTERN).call
module(MPATTERN).function(PATTERN).callees(DEPTH)
module(MPATTERN).function(PATTERN).return
module(MPATTERN).function(PATTERN).inline
module(MPATTERN).function(PATTERN).label(LPATTERN)
kernel.statement(PATTERN)
kernel.statement(PATTERN).nearest
kernel.statement(ADDRESS).absolute
module(MPATTERN).statement(PATTERN)
process("PATH").function("NAME")
process("PATH").statement("*@FILE.c:123")
process("PATH").library("PATH").function("NAME")
process("PATH").library("PATH").statement("*@FILE.c:123")
process("PATH").library("PATH").statement("*@FILE.c:123").nearest
process("PATH").function("*").return
process("PATH").function("myfun").label("foo")
process("PATH").function("foo").callee("bar")
process("PATH").function("foo").callee("bar").return
process("PATH").function("foo").callee("bar").call
process("PATH").function("foo").callees(DEPTH)
process(PID).function("NAME")
process(PID).function("myfun").label("foo")
process(PID).plt("NAME")
process(PID).plt("NAME").return
process(PID).statement("*@FILE.c:123")
process(PID).statement("*@FILE.c:123").nearest
process(PID).statement(ADDRESS).absolute

(See the USER-SPACE section below for more information on the process probes.)

The list above includes multiple variants and modifiers which provide additional functionality or filters. They are:

In the above list of probe points, MPATTERN stands for a string literal that aims to identify the loaded kernel module of interest. For in-tree kernel modules, the name suffices (e.g. "btrfs"). The name may also include the "*", "[]", and "?" wildcards to match multiple in-tree modules. Out-of-tree modules are also supported by specifying the full path to the ko file. Wildcards are not supported. The file must follow the convention of being named <module_name>.ko (characters ',' and '-' are replaced by '_').

LPATTERN stands for a source program label. It may also contain "*", "[]", and "?" wildcards. PATTERN stands for a string literal that aims to identify a point in the program. It is made up of three parts:

• The first part is the name of a function, as would appear in the nm program's output. This part may use the "*" and "?" wildcarding operators to match multiple names.
• The second part is optional and begins with the "@" character. It is followed by the path to the source file containing the function, which may include a wildcard pattern, such as mm/slab*. If it does not match as is, an implicit "*/" is optionally added before the pattern, so that a script need only name the last few components of a possibly long source directory path.
• Finally, the third part is optional if the file name part was given, and identifies the line number in the source file preceded by a ":" or a "+". The line number is assumed to be an absolute line number if preceded by a ":", or relative to the declaration line of the function if preceded by a "+". All the lines in the function can be matched with ":*". A range of lines x through y can be matched with ":x-y". Ranges and specific lines can be mixed using commas, e.g. ":x,y-z".

As an alternative, PATTERN may be a numeric constant, indicating an address. Such an address may be found from symbol tables of the appropriate kernel / module object file. It is verified against known statement code boundaries, and will be relocated for use at run time.

In guru mode only, absolute kernel-space addresses may be specified with the ".absolute" suffix. Such an address is considered already relocated, as if it came from /proc/kallsyms, so it cannot be checked against statement/instruction boundaries.

CONTEXT VARIABLES¶

Many of the source-level context variables, such as function parameters, locals, globals visible in the compilation unit, may be visible to probe handlers. They may refer to these variables by prefixing their name with "$" within the scripts. In addition, a special syntax allows limited traversal of structures, pointers, and arrays. More syntax allows pretty-printing of individual variables or their groups. See also @cast. Note that variables may be inaccessible due to them being paged out, or for a few other reasons. See also man error::fault(7stap).

Functions called from DWARF class probe points and from process.mark probes may also refer to context variables.

$var

refers to an in-scope variable or thread local storage variable "var". If it's an integer-like type, it will be cast to a 64-bit int for systemtap script use. String-like pointers (char *) may be copied to systemtap string values using the kernel_string or user_string functions.

@var("varname")

an alternative syntax for $varname

@var("varname","module")

The global variable or global thread local storage variable in scope of the given module already loaded into the current probed process. Useful to get an exported variable in a shared library loaded into the process being probed, or a global variable in a process while a shared library probe is being executed. For user-space modules only. For example: @var("_r_debug","/lib/ld-linux.so.2")

@var("varname@src/file.c")

refers to the global (either file local or external) variable varname defined when the file src/file.c was compiled. The CU in which the variable is resolved is the first CU in the module of the probe point which matches the given file name at the end and has the shortest file name path (e.g. given @var("foo@bar/baz.c") and CUs with file name paths src/sub/module/bar/baz.c and src/bar/baz.c the second CU will be chosen to resolve the (file) global variable foo

@var("varname@src/file.c","module")

The global variable in scope of the given CU, defined in the given module, even if the variable is static (so the name is not unique without the CU name).

$var->field traversal via a structure's or a pointer's field. This

generalized indirection operator may be repeated to follow more levels. Note that the . operator is not used for plain structure members, only -> for both purposes. (This is because "." is reserved for string concatenation.) Also note that for direct dereferencing of $var pointer {kernel,user}_{char,int,...}($var) should be used. (Refer to stapfuncs(5) for more details.)

$return

is available in return probes only for functions that are declared with a return value, which can be determined using @defined($return).

$var[N]

indexes into an array. The index given with a literal number or even an arbitrary numeric expression.

A number of operators exist for such basic context variable expressions:

$$vars

expands to a character string that is equivalent to

sprintf("parm1=%x ... parmN=%x var1=%x ... varN=%x",


        parm1, ..., parmN, var1, ..., varN)

for each variable in scope at the probe point. Some values may be printed as =? if their run-time location cannot be found.

$$locals

expands to a subset of $$vars for only local variables.

$$parms

expands to a subset of $$vars for only function parameters.

$$return

is available in return probes only. It expands to a string that is equivalent to sprintf("return=%x", $return) if the probed function has a return value, or else an empty string.

& $EXPR

expands to the address of the given context variable expression, if it is addressable.

@defined($EXPR)

expands to 1 or 0 iff the given context variable expression is resolvable, for use in conditionals such as

@defined($foo->bar) ? $foo->bar : 0

@probewrite($VAR)

see the PROBES section of stap(1).

$EXPR$

expands to a string with all of $EXPR's members, equivalent to

sprintf("{.a=%i, .b=%u, .c={...}, .d=[...]}",


         $EXPR->a, $EXPR->b)

$EXPR$$

expands to a string with all of $var's members and submembers, equivalent to

sprintf("{.a=%i, .b=%u, .c={.x=%p, .y=%c}, .d=[%i, ...]}",


        $EXPR->a, $EXPR->b, $EXPR->c->x, $EXPR->c->y, $EXPR->d[0])

@errno

expands to the last value the C library global variable errno was set to.

MORE ON RETURN PROBES¶

For the kernel ".return" probes, only a certain fixed number of returns may be outstanding. The default is a relatively small number, on the order of a few times the number of physical CPUs. If many different threads concurrently call the same blocking function, such as futex(2) or read(2), this limit could be exceeded, and skipped "kretprobes" would be reported by "stap -t". To work around this, specify a

probe FOO.return.maxactive(NNN)

suffix, with a large enough NNN to cover all expected concurrently blocked threads. Alternately, use the

stap -DKRETACTIVE=NNNN

stap command line macro setting to override the default for all ".return" probes.

For ".return" probes, context variables other than the "$return" may be accessible, as a convenience for a script programmer wishing to access function parameters. These values are snapshots taken at the time of function entry. (Local variables within the function are not generally accessible, since those variables did not exist in allocated/initialized form at the snapshot moment.) These entry-snapshot variables should be accessed via @entry($var).

In addition, arbitrary entry-time expressions can also be saved for ".return" probes using the @entry(expr) operator. For example, one can compute the elapsed time of a function:

probe kernel.function("do_filp_open").return {


    println( get_timeofday_us() - @entry(get_timeofday_us()) )
}

The following table summarizes how values related to a function parameter context variable, a pointer named addr, may be accessed from a .return probe.

DWARFLESS¶

In absence of debugging information, entry & exit points of kernel & module functions can be probed using the "kprobe" family of probes. However, these do not permit looking up the arguments / local variables of the function. Following constructs are supported :

kprobe.function(FUNCTION)
kprobe.function(FUNCTION).call
kprobe.function(FUNCTION).return
kprobe.module(NAME).function(FUNCTION)
kprobe.module(NAME).function(FUNCTION).call
kprobe.module(NAME).function(FUNCTION).return
kprobe.statement(ADDRESS).absolute

Probes of type function are recommended for kernel functions, whereas probes of type module are recommended for probing functions of the specified module. In case the absolute address of a kernel or module function is known, statement probes can be utilized.

Note that FUNCTION and MODULE names must not contain wildcards, or the probe will not be registered. Also, statement probes must be run under guru-mode only.

USER-SPACE¶

Support for user-space probing is available for kernels that are configured with the utrace extensions, or have the uprobes facility in linux 3.5. (Various kernel build configuration options need to be enabled; systemtap will advise if these are missing.)

There are several forms. First, a non-symbolic probe point:

process(PID).statement(ADDRESS).absolute

is analogous to kernel.statement(ADDRESS).absolute in that both use raw (unverified) virtual addresses and provide no $variables. The target PID parameter must identify a running process, and ADDRESS should identify a valid instruction address. All threads of that process will be probed.

Second, non-symbolic user-kernel interface events handled by utrace may be probed:

process(PID).begin
process("FULLPATH").begin
process.begin
process(PID).thread.begin
process("FULLPATH").thread.begin
process.thread.begin
process(PID).end
process("FULLPATH").end
process.end
process(PID).thread.end
process("FULLPATH").thread.end
process.thread.end
process(PID).syscall
process("FULLPATH").syscall
process.syscall
process(PID).syscall.return
process("FULLPATH").syscall.return
process.syscall.return
process(PID).insn
process("FULLPATH").insn
process(PID).insn.block
process("FULLPATH").insn.block

A process.begin probe gets called when new process described by PID or FULLPATH gets created. In addition, it is called once from the context of each preexisting process, at systemtap script startup. This is useful to track live processes. A process.thread.begin probe gets called when a new thread described by PID or FULLPATH gets created. A process.end probe gets called when process described by PID or FULLPATH dies. A process.thread.end probe gets called when a thread described by PID or FULLPATH dies. A process.syscall probe gets called when a thread described by PID or FULLPATH makes a system call. The system call number is available in the $syscall context variable, and the first 6 arguments of the system call are available in the $argN (ex. $arg1, $arg2, ...) context variable. A process.syscall.return probe gets called when a thread described by PID or FULLPATH returns from a system call. The system call number is available in the $syscall context variable, and the return value of the system call is available in the $return context variable. A process.insn probe gets called for every single-stepped instruction of the process described by PID or FULLPATH. A process.insn.block probe gets called for every block-stepped instruction of the process described by PID or FULLPATH.

If a process probe is specified without a PID or FULLPATH, all user threads will be probed. However, if systemtap was invoked with the -c or -x options, then process probes are restricted to the process hierarchy associated with the target process. If a process probe is unspecified (i.e. without a PID or FULLPATH), but with the -c option, the PATH of the -c cmd will be heuristically filled into the process PATH. In that case, only command parameters are allowed in the -c command (i.e. no command substitution allowed and no occurrences of any of these characters: '|&;<>(){}').

Third, symbolic static instrumentation compiled into programs and shared libraries may be probed:

process("PATH").mark("LABEL")
process("PATH").provider("PROVIDER").mark("LABEL")
process(PID).mark("LABEL")
process(PID).provider("PROVIDER").mark("LABEL")

A .mark probe gets called via a static probe which is defined in the application by STAP_PROBE1(PROVIDER,LABEL,arg1), which are macros defined in sys/sdt.h. The PROVIDER is an arbitrary application identifier, LABEL is the marker site identifier, and arg1 is the integer-typed argument. STAP_PROBE1 is used for probes with 1 argument, STAP_PROBE2 is used for probes with 2 arguments, and so on. The arguments of the probe are available in the context variables $arg1, $arg2, ... An alternative to using the STAP_PROBE macros is to use the dtrace script to create custom macros. Additionally, the variables $$name and $$provider are available as parts of the probe point name. The sys/sdt.h macro names DTRACE_PROBE* are available as aliases for STAP_PROBE*.

Finally, full symbolic source-level probes in user-space programs and shared libraries are supported. These are exactly analogous to the symbolic DWARF-based kernel/module probes described above. They expose the same sorts of context $variables for function parameters, local variables, and so on.

process("PATH").function("NAME")
process("PATH").statement("*@FILE.c:123")
process("PATH").plt("NAME")
process("PATH").library("PATH").plt("NAME")
process("PATH").library("PATH").function("NAME")
process("PATH").library("PATH").statement("*@FILE.c:123")
process("PATH").function("*").return
process("PATH").function("myfun").label("foo")
process("PATH").function("foo").callee("bar")
process("PATH").plt("NAME").return
process(PID).function("NAME")
process(PID).statement("*@FILE.c:123")
process(PID).plt("NAME")

Note that for all process probes, PATH names refer to executables that are searched the same way shells do: relative to the working directory if they contain a "/" character, otherwise in $PATH. If PATH names refer to scripts, the actual interpreters (specified in the script in the first line after the #! characters) are probed.

Tapset process probes placed in the special directory $prefix/share/systemtap/tapset/PATH/ with relative paths will have their process parameter prefixed with the location of the tapset. For example,

process("foo").function("NAME")

expands to

process("/usr/bin/foo").function("NAME")

when placed in $prefix/share/systemtap/tapset/PATH/usr/bin/

If PATH is a process component parameter referring to shared libraries then all processes that map it at runtime would be selected for probing. If PATH is a library component parameter referring to shared libraries then the process specified by the process component would be selected. Note that the PATH pattern in a library component will always apply to libraries statically determined to be in use by the process. However, you may also specify the full path to any library file even if not statically needed by the process.

A .plt probe will probe functions in the program linkage table corresponding to the rest of the probe point. .plt can be specified as a shorthand for .plt("*"). The symbol name is available as a $$name context variable; function arguments are not available, since PLTs are processed without debuginfo. A .plt.return probe places a probe at the moment after the return from the named function.

If the PATH string contains wildcards as in the MPATTERN case, then standard globbing is performed to find all matching paths. In this case, the $PATH environment variable is not used.

If systemtap was invoked with the -c or -x options, then process probes are restricted to the process hierarchy associated with the target process.

JAVA¶

Support for probing Java methods is available using Byteman as a backend. Byteman is an instrumentation tool from the JBoss project which systemtap can use to monitor invocations for a specific method or line in a Java program.

Systemtap does so by generating a Byteman script listing the probes to instrument and then invoking the Byteman bminstall utility.

This Java instrumentation support is currently a prototype feature with major limitations. Moreover, Java probing currently does not work across users; the stap script must run (with appropriate permissions) under the same user that the Java process being probed. (Thus a stap script under root currently cannot probe Java methods in a non-root-user Java process.)

The first probe type refers to Java processes by the name of the Java process:

java("PNAME").class("CLASSNAME").method("PATTERN")
java("PNAME").class("CLASSNAME").method("PATTERN").return

The PNAME argument must be a pre-existing jvm pid, and be identifiable via a jps listing.

The PATTERN parameter specifies the signature of the Java method to probe. The signature must consist of the exact name of the method, followed by a bracketed list of the types of the arguments, for instance "myMethod(int,double,Foo)". Wildcards are not supported.

The probe can be set to trigger at a specific line within the method by appending a line number with colon, just as in other types of probes: "myMethod(int,double,Foo):245".

The CLASSNAME parameter identifies the Java class the method belongs to, either with or without the package qualification. By default, the probe only triggers on descendants of the class that do not override the method definition of the original class. However, CLASSNAME can take an optional caret prefix, as in ^org.my.MyClass, which specifies that the probe should also trigger on all descendants of MyClass that override the original method. For instance, every method with signature foo(int) in program org.my.MyApp can be probed at once using

java("org.my.MyApp").class("^java.lang.Object").method("foo(int)")

The second probe type works analogously, but refers to Java processes by PID:

java(PID).class("CLASSNAME").method("PATTERN")
java(PID).class("CLASSNAME").method("PATTERN").return

(PIDs for an already running process can be obtained using the jps(1) utility.)

Context variables defined within java probes include $arg1 through $arg10 (for up to the first 10 arguments of a method), represented as character-pointers for the toString() form of each actual argument. The arg1 through arg10 script variables provide access to these as ordinary strings, fetched via user_string_warn().

Prior to systemtap version 3.1, $arg1 through $arg10 could contain either integers or character pointers, depending on the types of the objects being passed to each particular java method. This previous behaviour may be invoked with the stap --compatible=3.0 flag.

PROCFS¶

These probe points allow procfs "files" in /proc/systemtap/MODNAME to be created, read and written using a permission that may be modified using the proper umask value. Default permissions are 0400 for read probes, and 0200 for write probes. If both a read and write probe are being used on the same file, a default permission of 0600 will be used. Using procfs.umask(0040).read would result in a 0404 permission set for the file. (MODNAME is the name of the systemtap module). The proc filesystem is a pseudo-filesystem which is used as an interface to kernel data structures. There are several probe point variants supported by the translator:

procfs("PATH").read
procfs("PATH").umask(UMASK).read
procfs("PATH").read.maxsize(MAXSIZE)
procfs("PATH").umask(UMASK).maxsize(MAXSIZE)
procfs("PATH").write
procfs("PATH").umask(UMASK).write
procfs.read
procfs.umask(UMASK).read
procfs.read.maxsize(MAXSIZE)
procfs.umask(UMASK).read.maxsize(MAXSIZE)
procfs.write
procfs.umask(UMASK).write

Note that there are a few differences when procfs probes are used in the stapbpf runtime. FIFO special files are used instead of proc filesystem files. These files are created in /var/tmp/systemtap-USER/MODNAME. (USER is the name of the user). Additionally, users cannot create both read and write probes on the same file.

PATH is the file name (relative to /proc/systemtap/MODNAME or /var/tmp/systemtap-USER/MODNAME) to be created. If no PATH is specified (as in the last two variants above), PATH defaults to "command". The file name "__stdin" is used internally by systemtap for input probes and should not be used as a PATH for procfs probes; see the input probe section below.

When a user reads /proc/systemtap/MODNAME/PATH (normal runtime) or /var/tmp/systemtap-USER/MODNAME (stapbpf runtime), the corresponding procfs read probe is triggered. The string data to be read should be assigned to a variable named $value, like this:

procfs("PATH").read { $value = "100\n" }

When a user writes into /proc/systemtap/MODNAME/PATH (normal runtime) or /var/tmp/systemtap-USER/MODNAME (stapbpf runtime), the corresponding procfs write probe is triggered. The data the user wrote is available in the string variable named $value, like this:

procfs("PATH").write { printf("user wrote: %s", $value) }

MAXSIZE is the size of the procfs read buffer. Specifying MAXSIZE allows larger procfs output. If no MAXSIZE is specified, the procfs read buffer defaults to STP_PROCFS_BUFSIZE (which defaults to MAXSTRINGLEN, the maximum length of a string). If setting the procfs read buffers for more than one file is needed, it may be easiest to override the STP_PROCFS_BUFSIZE definition. Here's an example of using MAXSIZE:

procfs.read.maxsize(1024) {


    $value = "long string..."


    $value .= "another long string..."


    $value .= "another long string..."


    $value .= "another long string..."
}

INPUT¶

These probe points make input from stdin available to the script during runtime. The translator currently supports two variants of this family:

input.char
input.line

input.char is triggered each time a character is read from stdin. The current character is available in the string variable named char. There is no newline buffering; the next character is read from stdin as soon as it becomes available.

input.line causes all characters read from stdin to be buffered until a newline is read, at which point the probe will be triggered. The current line of characters (including the newline) is made available in a string variable named line. Note that no more than MAXSTRINGLEN characters will be buffered. Any additional characters will not be included in line.

Input probes are aliases for procfs("__stdin").write. Systemtap reconfigures stdin if the presence of this procfs probe is detected, therefore "__stdin" should not be used as a path argument for procfs probes. Additionally, input probes will not work with the -F and --remote options.

NETFILTER HOOKS¶

These probe points allow observation of network packets using the netfilter mechanism. A netfilter probe in systemtap corresponds to a netfilter hook function in the original netfilter probes API. It is probably more convenient to use tapset::netfilter(3stap), which wraps the primitive netfilter hooks and does the work of extracting useful information from the context variables.

There are several probe point variants supported by the translator:

netfilter.hook("HOOKNAME").pf("PROTOCOL_F")
netfilter.pf("PROTOCOL_F").hook("HOOKNAME")
netfilter.hook("HOOKNAME").pf("PROTOCOL_F").priority("PRIORITY")
netfilter.pf("PROTOCOL_F").hook("HOOKNAME").priority("PRIORITY")

PROTOCOL_F is the protocol family to listen for, currently one of NFPROTO_IPV4, NFPROTO_IPV6, NFPROTO_ARP, or NFPROTO_BRIDGE.

HOOKNAME is the point, or 'hook', in the protocol stack at which to intercept the packet. The available hook names for each protocol family are taken from the kernel header files <linux/netfilter_ipv4.h>, <linux/netfilter_ipv6.h>, <linux/netfilter_arp.h> and <linux/netfilter_bridge.h>. For instance, allowable hook names for NFPROTO_IPV4 are NF_INET_PRE_ROUTING, NF_INET_LOCAL_IN, NF_INET_FORWARD, NF_INET_LOCAL_OUT, and NF_INET_POST_ROUTING.

PRIORITY is an integer priority giving the order in which the probe point should be triggered relative to any other netfilter hook functions which trigger on the same packet. Hook functions execute on each packet in order from smallest priority number to largest priority number. If no PRIORITY is specified (as in the first two probe point variants above), PRIORITY defaults to "0".

There are a number of predefined priority names of the form NF_IP_PRI_* and NF_IP6_PRI_* which are defined in the kernel header files <linux/netfilter_ipv4.h> and <linux/netfilter_ipv6.h> respectively. The script is permitted to use these instead of specifying an integer priority. (The probe points for NFPROTO_ARP and NFPROTO_BRIDGE currently do not expose any named hook priorities to the script writer.) Thus, allowable ways to specify the priority include:

priority("255")
priority("NF_IP_PRI_SELINUX_LAST")

A script using guru mode is permitted to specify any identifier or number as the parameter for hook, pf, and priority. This feature should be used with caution, as the parameter is inserted verbatim into the C code generated by systemtap.

The netfilter probe points define the following context variables:

$hooknum

The hook number.

$skb

The address of the sk_buff struct representing the packet. See <linux/skbuff.h> for details on how to use this struct, or alternatively use the tapset tapset::netfilter(3stap) for easy access to key information.

$in

The address of the net_device struct representing the network device on which the packet was received (if any). May be 0 if the device is unknown or undefined at that stage in the protocol stack.

$out

The address of the net_device struct representing the network device on which the packet will be sent (if any). May be 0 if the device is unknown or undefined at that stage in the protocol stack.

$verdict

(Guru mode only.) Assigning one of the verdict values defined in <linux/netfilter.h> to this variable alters the further progress of the packet through the protocol stack. For instance, the following guru mode script forces all ipv6 network packets to be dropped:

probe netfilter.pf("NFPROTO_IPV6").hook("NF_IP6_PRE_ROUTING") {


  $verdict = 0 /* nf_drop */
}

For convenience, unlike the primitive probe points discussed here, the probes defined in tapset::netfilter(3stap) export the lowercase names of the verdict constants (e.g. NF_DROP becomes nf_drop) as local variables.

KERNEL TRACEPOINTS¶

This family of probe points hooks up to static probing tracepoints inserted into the kernel or modules. As with markers, these tracepoints are special macro calls inserted by kernel developers to make probing faster and more reliable than with DWARF-based probes, and DWARF debugging information is not required to probe tracepoints. Tracepoints have an extra advantage of more strongly-typed parameters than markers.

Tracepoint probes look like: kernel.trace("name"). The tracepoint name string, which may contain the usual wildcard characters, is matched against the names defined by the kernel developers in the tracepoint header files. To restrict the search to specific subsystems (e.g. sched, ext3, etc...), the following syntax can be used: kernel.trace("system:name"). The tracepoint system string may also contain the usual wildcard characters.

The handler associated with a tracepoint-based probe may read the optional parameters specified at the macro call site. These are named according to the declaration by the tracepoint author. For example, the tracepoint probe kernel.trace("sched:sched_switch") provides the parameters $prev and $next. If the parameter is a complex type, as in a struct pointer, then a script can access fields with the same syntax as DWARF $target variables. Also, tracepoint parameters cannot be modified, but in guru-mode a script may modify fields of parameters.

The subsystem and name of the tracepoint are available in $$system and $$name and a string of name=value pairs for all parameters of the tracepoint is available in $$vars or $$parms.

KERNEL MARKERS (OBSOLETE)¶

This family of probe points hooks up to an older style of static probing markers inserted into older kernels or modules. These markers are special STAP_MARK macro calls inserted by kernel developers to make probing faster and more reliable than with DWARF-based probes. Further, DWARF debugging information is not required to probe markers.

Marker probe points begin with kernel. The next part names the marker itself: mark("name"). The marker name string, which may contain the usual wildcard characters, is matched against the names given to the marker macros when the kernel and/or module was compiled. Optionally, you can specify format("format"). Specifying the marker format string allows differentiation between two markers with the same name but different marker format strings.

The handler associated with a marker-based probe may read the optional parameters specified at the macro call site. These are named $arg1 through $argNN, where NN is the number of parameters supplied by the macro. Number and string parameters are passed in a type-safe manner.

The marker format string associated with a marker is available in $format. And also the marker name string is available in $name.

HARDWARE BREAKPOINTS¶

This family of probes is used to set hardware watchpoints for a given
(global) kernel symbol. The probes take three components as inputs :

1. The virtual address / name of the kernel symbol to be traced is supplied as argument to this class of probes. ( Probes for only data segment variables are supported. Probing local variables of a function cannot be done.)

2. Nature of access to be probed : a. .write probe gets triggered when a write happens at the specified address/symbol name. b. rw probe is triggered when either a read or write happens.

3. .length (optional) Users have the option of specifying the address interval to be probed using "length" constructs. The user-specified length gets approximated to the closest possible address length that the architecture can support. If the specified length exceeds the limits imposed by architecture, an error message is flagged and probe registration fails. Wherever 'length' is not specified, the translator requests a hardware breakpoint probe of length 1. It should be noted that the "length" construct is not valid with symbol names.

Following constructs are supported :

probe kernel.data(ADDRESS).write
probe kernel.data(ADDRESS).rw
probe kernel.data(ADDRESS).length(LEN).write
probe kernel.data(ADDRESS).length(LEN).rw
probe kernel.data("SYMBOL_NAME").write
probe kernel.data("SYMBOL_NAME").rw

This set of probes make use of the debug registers of the processor, which is a scarce resource. (4 on x86 , 1 on powerpc ) The script translation flags a warning if a user requests more hardware breakpoint probes than the limits set by architecture. For example,a pass-2 warning is flashed when an input script requests 5 hardware breakpoint probes on an x86 system while x86 architecture supports a maximum of 4 breakpoints. Users are cautioned to set probes judiciously.

PERF¶

This family of probe points interfaces to the kernel "perf event" infrastructure for controlling hardware performance counters. The events being attached to are described by the "type", "config" fields of the perf_event_attr structure, and are sampled at an interval governed by the "sample_period" and "sample_freq" fields.

These fields are made available to systemtap scripts using the following syntax:

probe perf.type(NN).config(MM).sample(XX)
probe perf.type(NN).config(MM).hz(XX)
probe perf.type(NN).config(MM)
probe perf.type(NN).config(MM).process("PROC")
probe perf.type(NN).config(MM).counter("COUNTER")
probe perf.type(NN).config(MM).process("PROC").counter("NAME")

The systemtap probe handler is called once per XX increments of the underlying performance counter when using the .sample field or at a frequency in hertz when using the .hz field. When not specified, the default behavior is to sample at a count of 1000000. The range of valid type/config is described by the perf_event_open(2) system call, and/or the linux/perf_event.h file. Invalid combinations or exhausted hardware counter resources result in errors during systemtap script startup. Systemtap does not sanity-check the values: it merely passes them through to the kernel for error- and safety-checking. By default the perf event probe is systemwide unless .process is specified, which will bind the probe to a specific task. If the name is omitted then it is inferred from the stap -c argument. A perf event can be read on demand using .counter. The body of the perf probe handler will not be invoked for a .counter probe; instead, the counter is read in a user space probe via:

process("PROC").statement("func@file") {stat <<< @perf("NAME")}

PYTHON¶

Support for probing python 2 and python 3 function is available with the help of an extra python support module. Note that the debuginfo for the version of python being probed is required. To run a python script with the extra python support module you'd add the '-m HelperSDT' option to your python command, like this:

stap foo.stp -c "python -m HelperSDT foo.py"

Python probes look like the following:

python2.module("MPATTERN").function("PATTERN")
python2.module("MPATTERN").function("PATTERN").call
python2.module("MPATTERN").function("PATTERN").return
python3.module("MPATTERN").function("PATTERN")
python3.module("MPATTERN").function("PATTERN").call
python3.module("MPATTERN").function("PATTERN").return

The list above includes multiple variants and modifiers which provide additional functionality or filters. They are:

PATTERN stands for a string literal that aims to identify a point in the python program. It is made up of three parts:

• The first part is the name of a function (e.g. "foo") or class method (e.g. "bar.baz"). This part may use the "*" and "?" wildcarding operators to match multiple names.
• The second part is optional and begins with the "@" character. It is followed by the path to the source file containing the function, which may include a wildcard pattern. The python path is searched for a matching filename.
• Finally, the third part is optional if the file name part was given, and identifies the line number in the source file preceded by a ":" or a "+". The line number is assumed to be an absolute line number if preceded by a ":", or relative to the declaration line of the function if preceded by a "+". All the lines in the function can be matched with ":*". A range of lines x through y can be matched with ":x-y". Ranges and specific lines can be mixed using commas, e.g. ":x,y-z".

In the above list of probe points, MPATTERN stands for a python module or script name that names the python module of interest. This part may use the "*" and "?" wildcarding operators to match multiple names. The python path is searched for a matching filename.