2. EL 8
  3. tk
  4. place(n)

Scroll to navigation

place(n) Tk Built-In Commands place(n) 





NAME


place - Geometry manager for fixed or rubber-sheet placement






SYNOPSIS


place option arg ?arg ...?








DESCRIPTION


The placer is a geometry manager for Tk. It provides simple fixed
    placement of windows, where you specify the exact size and location of one
    window, called the slave, within another window, called the
    master. The placer also provides rubber-sheet placement, where you
    specify the size and location of the slave in terms of the dimensions of the
    master, so that the slave changes size and location in response to changes
    in the size of the master. Lastly, the placer allows you to mix these styles
    of placement so that, for example, the slave has a fixed width and height
    but is centered inside the master.



  

  
Arrange for the placer to manage the geometry of a slave whose pathName is
      window. The remaining arguments consist of one or more
      option-value pairs that specify the way in which window's
      geometry is managed. Option may have any of the values accepted by
      the place configure command.

  

  
Query or modify the geometry options of the slave given by window.
      If no option is specified, this command returns a list describing
      the available options (see Tk_ConfigureInfo for information on the
      format of this list). If option is specified with no value,
      then the command returns a list describing the one named option (this list
      will be identical to the corresponding sublist of the value returned if no
      option is specified). If one or more option-value pairs are
      specified, then the command modifies the given option(s) to have the given
      value(s); in this case the command returns an empty string.






The following option-value pairs are supported:



  

  
Where specifies which point of window is to be positioned at
      the (x,y) location selected by the -x, -y, -relx, and
      -rely options. The anchor point is in terms of the outer area of
      window including its border, if any. Thus if where is
      se then the lower-right corner of window's border will
      appear at the given (x,y) location in the master. The anchor position
      defaults to nw.

  

  
Mode determines the degree to which borders within the master are
      used in determining the placement of the slave. The default and most
      common value is inside. In this case the placer considers the area
      of the master to be the innermost area of the master, inside any border:
      an option of -x 0 corresponds to an x-coordinate just inside the
      border and an option of -relwidth 1.0 means window will fill
      the area inside the master's border.






If mode is outside then the placer considers the
    area of the master to include its border; this mode is typically used when
    placing window outside its master, as with the options -x 0 -y 0
    -anchor ne. Lastly, mode may be specified as ignore, in
    which case borders are ignored: the area of the master is considered to be
    its official X area, which includes any internal border but no external
    border. A bordermode of ignore is probably not very useful.





  

  
Size specifies the height for window in screen units (i.e.
      any of the forms accepted by Tk_GetPixels). The height will be the
      outer dimension of window including its border, if any. If
      size is an empty string, or if no -height or
      -relheight option is specified, then the height requested
      internally by the window will be used.

  

  
Master specifies the path name of the window relative to which
      window is to be placed. Master must either be
      window's parent or a descendant of window's parent. In
      addition, master and window must both be descendants of the
      same top-level window. These restrictions are necessary to guarantee that
      window is visible whenever master is visible. If this option
      is not specified then the master defaults to window's parent.

  

  
Size specifies the height for window. In this case the
      height is specified as a floating-point number relative to the height of
      the master: 0.5 means window will be half as high as the master,
      1.0 means window will have the same height as the master, and so
      on. If both -height and -relheight are specified for a
      slave, their values are summed. For example, -relheight 1.0 -height
      -2 makes the slave 2 pixels shorter than the master.

  

  
Size specifies the width for window. In this case the width
      is specified as a floating-point number relative to the width of the
      master: 0.5 means window will be half as wide as the master, 1.0
      means window will have the same width as the master, and so on. If
      both -width and -relwidth are specified for a slave, their
      values are summed. For example, -relwidth 1.0 -width 5 makes the
      slave 5 pixels wider than the master.

  

  
Location specifies the x-coordinate within the master window of the
      anchor point for window. In this case the location is specified in
      a relative fashion as a floating-point number: 0.0 corresponds to the left
      edge of the master and 1.0 corresponds to the right edge of the master.
      Location need not be in the range 0.0-1.0. If both -x and
      -relx are specified for a slave then their values are summed. For
      example, -relx 0.5 -x -2 positions the left edge of the slave 2
      pixels to the left of the center of its master.

  

  
Location specifies the y-coordinate within the master window of the
      anchor point for window. In this case the value is specified in a
      relative fashion as a floating-point number: 0.0 corresponds to the top
      edge of the master and 1.0 corresponds to the bottom edge of the master.
      Location need not be in the range 0.0-1.0. If both -y and
      -rely are specified for a slave then their values are summed. For
      example, -rely 0.5 -x 3 positions the top edge of the slave 3
      pixels below the center of its master.

  

  
Size specifies the width for window in screen units (i.e.
      any of the forms accepted by Tk_GetPixels). The width will be the
      outer width of window including its border, if any. If size
      is an empty string, or if no -width or -relwidth option is
      specified, then the width requested internally by the window will be
    used.

  

  
Location specifies the x-coordinate within the master window of the
      anchor point for window. The location is specified in screen units
      (i.e. any of the forms accepted by Tk_GetPixels) and need not lie
      within the bounds of the master window.

  

  
Location specifies the y-coordinate within the master window of the
      anchor point for window. The location is specified in screen units
      (i.e. any of the forms accepted by Tk_GetPixels) and need not lie
      within the bounds of the master window.




If the same value is specified separately with two different
    options, such as -x and -relx, then the most recent option is
    used and the older one is ignored.





  

  
Causes the placer to stop managing the geometry of window. As a
      side effect of this command window will be unmapped so that it does
      not appear on the screen. If window is not currently managed by the
      placer then the command has no effect. This command returns an empty
      string.

  

  
Returns a list giving the current configuration of window. The list
      consists of option-value pairs in exactly the same form as might be
      specified to the place configure command.

  

  
Returns a list of all the slave windows for which window is the
      master. If there are no slaves for window then an empty string is
      returned.




If the configuration of a window has been retrieved with place
    info, that configuration can be restored later by first using place
    forget to erase any existing information for the window and then
    invoking place configure with the saved information.






FINE POINTS


It is not necessary for the master window to be the parent of the
    slave window. This feature is useful in at least two situations. First, for
    complex window layouts it means you can create a hierarchy of subwindows
    whose only purpose is to assist in the layout of the parent. The
    “real children” of the parent (i.e. the windows that are
    significant for the application's user interface) can be children of the
    parent yet be placed inside the windows of the geometry-management
    hierarchy. This means that the path names of the “real
    children” do not reflect the geometry-management hierarchy and users
    can specify options for the real children without being aware of the
    structure of the geometry-management hierarchy.


A second reason for having a master different than the slave's
    parent is to tie two siblings together. For example, the placer can be used
    to force a window always to be positioned centered just below one of its
    siblings by specifying the configuration




-in sibling -relx 0.5 -rely 1.0 -anchor n -bordermode outside



Whenever the sibling is repositioned in the future, the slave will be
  repositioned as well.

Unlike many other geometry managers (such as the packer) the
    placer does not make any attempt to manipulate the geometry of the master
    windows or the parents of slave windows (i.e. it does not set their
    requested sizes). To control the sizes of these windows, make them windows
    like frames and canvases that provide configuration options for this
    purpose.






EXAMPLE


Make the label occupy the middle bit of the toplevel, no matter
    how it is resized:




label .l -text "In the\nMiddle!" -bg black -fg white
place .l -relwidth .3 -relx .35 -relheight .3 -rely .35








SEE ALSO


grid(n), pack(n)






KEYWORDS


geometry manager, height, location, master, place, rubber sheet,
    slave, width







  

    
    Tk