Listing the mounts¶

The listing mode is maintained for backward compatibility only.

For more robust and customizable output use findmnt(8), especially in your scripts. Note that control characters in the mountpoint name are replaced with '?'.

The following command lists all mounted filesystems (of type type):

Indicating the device and filesystem¶

Most devices are indicated by a filename (of a block special device), like /dev/sda1, but there are other possibilities. For example, in the case of an NFS mount, device may look like knuth.cwi.nl:/dir. It is also possible to indicate a block special device using its filesystem label or UUID (see the -L and -U options below), or its partition label or UUID. Partition identifiers are supported for example for GUID Partition Tables (GPT).

The device name of disk partitions are unstable; hardware reconfiguration, adding or removing a device can cause change in names. This is reason why it's strongly recommended to use filesystem or partition identificators like UUID or LABEL.

The command lsblk --fs provides overview of filesystems, LABELs and UUIDs on available block devices. The command blkid -p <device> provides details about a filesystem on the specified device.

Don't forget that there is no guarantee that UUIDs and labels are really unique, especially if you move, share or copy the device. Use lsblk -o +UUID,PARTUUID to verify that the UUIDs are really unique in your system.

The recommended setup is to use tags (e.g. UUID=uuid) rather than /dev/disk/by-{label,uuid,partuuid,partlabel} udev symlinks in the /etc/fstab file. Tags are more readable, robust and portable. The mount(8) command internally uses udev symlinks, so the use of symlinks in /etc/fstab has no advantage over tags. For more details see libblkid(3).

Note that mount(8) uses UUIDs as strings. The UUIDs from the command line or from fstab(5) are not converted to internal binary representation. The string representation of the UUID should be based on lower case characters.

The proc filesystem is not associated with a special device, and when mounting it, an arbitrary keyword, such as proc can be used instead of a device specification. (The customary choice none is less fortunate: the error message `none already mounted' from mount can be confusing.)

The files /etc/fstab, /etc/mtab and /proc/mounts¶

The file /etc/fstab (see fstab(5)), may contain lines describing what devices are usually mounted where, using which options. The default location of the fstab(5) file can be overridden with the --fstab path command-line option (see below for more details).

The command

When mounting a filesystem mentioned in fstab or mtab, it suffices to specify on the command line only the device, or only the mount point.

The programs mount and umount traditionally maintained a list of currently mounted filesystems in the file /etc/mtab. This real mtab file is still supported, but on current Linux systems it is better to make it a symlink to /proc/mounts instead, because a regular mtab file maintained in userspace cannot reliably work with namespaces, containers and other advanced Linux features.

If no arguments are given to mount, the list of mounted filesystems is printed.

If you want to override mount options from /etc/fstab you have to use the -o option:

The mount program does not read the /etc/fstab file if both device (or LABEL, UUID, PARTUUID or PARTLABEL) and dir are specified. For example, to mount device foo at /dir:

Non-superuser mounts¶

Normally, only the superuser can mount filesystems. However, when fstab contains the user option on a line, anybody can mount the corresponding filesystem.

Thus, given a line

For more details, see fstab(5). Only the user that mounted a filesystem can unmount it again. If any user should be able to unmount it, then use users instead of user in the fstab line. The owner option is similar to the user option, with the restriction that the user must be the owner of the special file. This may be useful e.g. for /dev/fd if a login script makes the console user owner of this device. The group option is similar, with the restriction that the user must be member of the group of the special file.

Bind mount operation¶

Remount part of the file hierarchy somewhere else. The call is:

or by using this fstab entry:

After this call the same contents are accessible in two places.

It is important to understand that "bind" does not to create any second-class or special node in the kernel VFS. The "bind" is just another operation to attach a filesystem. There is nowhere stored information that the filesystem has been attached by "bind" operation. The olddir and newdir are independent and the olddir maybe be umounted.

One can also remount a single file (on a single file). It's also possible to use the bind mount to create a mountpoint from a regular directory, for example:

The bind mount call attaches only (part of) a single filesystem, not possible submounts. The entire file hierarchy including submounts is attached a second place by using:

Note that the filesystem mount options will remain the same as those on the original mount point.

mount(8) since v2.27 allows to change the mount options by passing the relevant options along with --bind. For example:

This feature is not supported by the Linux kernel; it is implemented in userspace by an additional mount(2) remounting system call. This solution is not atomic.

The alternative (classic) way to create a read-only bind mount is to use the remount operation, for example:

Note that a read-only bind will create a read-only mountpoint (VFS entry), but the original filesystem superblock will still be writable, meaning that the olddir will be writable, but the newdir will be read-only.

It's also possible to change nosuid, nodev, noexec, noatime, nodiratime and relatime VFS entry flags by "remount,bind" operation. The another (for example filesystem specific flags) are silently ignored. It's impossible to change mount options recursively (for example with -o rbind,ro).

mount(8) since v2.31 ignores the bind flag from /etc/fstab on remount operation (if "-o remount" specified on command line). This is necessary to fully control mount options on remount by command line. In the previous versions the bind flag has been always applied and it was impossible to re-define mount options without interaction with the bind semantic. This mount(8) behavior does not affect situations when "remount,bind" is specified in the /etc/fstab file.

The move operation¶

Move a mounted tree to another place (atomically). The call is:

This will cause the contents which previously appeared under olddir to now be accessible under newdir. The physical location of the files is not changed. Note that olddir has to be a mountpoint.

Note also that moving a mount residing under a shared mount is invalid and unsupported. Use findmnt -o TARGET,PROPAGATION to see the current propagation flags.

Shared subtree operations¶

Since Linux 2.6.15 it is possible to mark a mount and its submounts as shared, private, slave or unbindable. A shared mount provides the ability to create mirrors of that mount such that mounts and unmounts within any of the mirrors propagate to the other mirror. A slave mount receives propagation from its master, but not vice versa. A private mount carries no propagation abilities. An unbindable mount is a private mount which cannot be cloned through a bind operation. The detailed semantics are documented in Documentation/filesystems/sharedsubtree.txt file in the kernel source tree.

Supported operations are:

mount --make-shared mountpoint
mount --make-slave mountpoint
mount --make-private mountpoint
mount --make-unbindable mountpoint

The following commands allow one to recursively change the type of all the mounts under a given mountpoint.

mount --make-rshared mountpoint
mount --make-rslave mountpoint
mount --make-rprivate mountpoint
mount --make-runbindable mountpoint

mount(8) does not read fstab(5) when a --make-* operation is requested. All necessary information has to be specified on the command line.

Note that the Linux kernel does not allow to change multiple propagation flags with a single mount(2) system call, and the flags cannot be mixed with other mount options and operations.

Since util-linux 2.23 the mount command allows to do more propagation (topology) changes by one mount(8) call and do it also together with other mount operations. This feature is EXPERIMENTAL. The propagation flags are applied by additional mount(2) system calls when the preceding mount operations were successful. Note that this use case is not atomic. It is possible to specify the propagation flags in fstab(5) as mount options (private, slave, shared, unbindable, rprivate, rslave, rshared, runbindable).

For example:

mount --make-private --make-unbindable /dev/sda1 /foo

is the same as:

mount /dev/sda1 /foo
mount --make-private /foo
mount --make-unbindable /foo

Mount options for adfs¶

uid=value and gid=value

Set the owner and group of the files in the filesystem (default: uid=gid=0).

ownmask=value and othmask=value

Set the permission mask for ADFS 'owner' permissions and 'other' permissions, respectively (default: 0700 and 0077, respectively). See also /usr/src/linux/Documentation/filesystems/adfs.txt.

Mount options for affs¶

uid=value and gid=value

Set the owner and group of the root of the filesystem (default: uid=gid=0, but with option uid or gid without specified value, the UID and GID of the current process are taken).

setuid=value and setgid=value

Set the owner and group of all files.

mode=value

Set the mode of all files to value & 0777 disregarding the original permissions. Add search permission to directories that have read permission. The value is given in octal.

protect

Do not allow any changes to the protection bits on the filesystem.

usemp

Set UID and GID of the root of the filesystem to the UID and GID of the mount point upon the first sync or umount, and then clear this option. Strange...

verbose

Print an informational message for each successful mount.

prefix=string

Prefix used before volume name, when following a link.

volume=string

Prefix (of length at most 30) used before '/' when following a symbolic link.

reserved=value

(Default: 2.) Number of unused blocks at the start of the device.

root=value

Give explicitly the location of the root block.

bs=value

Give blocksize. Allowed values are 512, 1024, 2048, 4096.

grpquota|noquota|quota|usrquota

These options are accepted but ignored. (However, quota utilities may react to such strings in /etc/fstab.)

Mount options for debugfs¶

The debugfs filesystem is a pseudo filesystem, traditionally mounted on /sys/kernel/debug. As of kernel version 3.4, debugfs has the following options:

uid=n, gid=n

Set the owner and group of the mountpoint.

mode=value

Sets the mode of the mountpoint.

Mount options for devpts¶

The devpts filesystem is a pseudo filesystem, traditionally mounted on /dev/pts. In order to acquire a pseudo terminal, a process opens /dev/ptmx; the number of the pseudo terminal is then made available to the process and the pseudo terminal slave can be accessed as /dev/pts/<number>.

uid=value and gid=value

This sets the owner or the group of newly created PTYs to the specified values. When nothing is specified, they will be set to the UID and GID of the creating process. For example, if there is a tty group with GID 5, then gid=5 will cause newly created PTYs to belong to the tty group.

mode=value

Set the mode of newly created PTYs to the specified value. The default is 0600. A value of mode=620 and gid=5 makes "mesg y" the default on newly created PTYs.

newinstance

Create a private instance of devpts filesystem, such that indices of ptys allocated in this new instance are independent of indices created in other instances of devpts.

All mounts of devpts without this newinstance option share the same set of pty indices (i.e legacy mode). Each mount of devpts with the newinstance option has a private set of pty indices.

This option is mainly used to support containers in the linux kernel. It is implemented in linux kernel versions starting with 2.6.29. Further, this mount option is valid only if CONFIG_DEVPTS_MULTIPLE_INSTANCES is enabled in the kernel configuration.

To use this option effectively, /dev/ptmx must be a symbolic link to pts/ptmx. See Documentation/filesystems/devpts.txt in the linux kernel source tree for details.

ptmxmode=value

Set the mode for the new ptmx device node in the devpts filesystem.

With the support for multiple instances of devpts (see newinstance option above), each instance has a private ptmx node in the root of the devpts filesystem (typically /dev/pts/ptmx).

For compatibility with older versions of the kernel, the default mode of the new ptmx node is 0000. ptmxmode=value specifies a more useful mode for the ptmx node and is highly recommended when the newinstance option is specified.

This option is only implemented in linux kernel versions starting with 2.6.29. Further, this option is valid only if CONFIG_DEVPTS_MULTIPLE_INSTANCES is enabled in the kernel configuration.

Mount options for fat¶

(Note: fat is not a separate filesystem, but a common part of the msdos, umsdos and vfat filesystems.)

blocksize={512|1024|2048}

Set blocksize (default 512). This option is obsolete.

uid=value and gid=value

Set the owner and group of all files. (Default: the UID and GID of the current process.)

umask=value

Set the umask (the bitmask of the permissions that are not present). The default is the umask of the current process. The value is given in octal.

dmask=value

Set the umask applied to directories only. The default is the umask of the current process. The value is given in octal.

fmask=value

Set the umask applied to regular files only. The default is the umask of the current process. The value is given in octal.

allow_utime=value

This option controls the permission check of mtime/atime.

check=value

Three different levels of pickyness can be chosen:

codepage=value

Sets the codepage for converting to shortname characters on FAT and VFAT filesystems. By default, codepage 437 is used.

conv=mode

This option is obsolete and may fail or being ignored.

cvf_format=module

Forces the driver to use the CVF (Compressed Volume File) module cvf_module instead of auto-detection. If the kernel supports kmod, the cvf_format=xxx option also controls on-demand CVF module loading. This option is obsolete.

cvf_option=option

Option passed to the CVF module. This option is obsolete.

debug

Turn on the debug flag. A version string and a list of filesystem parameters will be printed (these data are also printed if the parameters appear to be inconsistent).

discard

If set, causes discard/TRIM commands to be issued to the block device when blocks are freed. This is useful for SSD devices and sparse/thinly-provisioned LUNs.

dos1xfloppy

If set, use a fallback default BIOS Parameter Block configuration, determined by backing device size. These static parameters match defaults assumed by DOS 1.x for 160 kiB, 180 kiB, 320 kiB, and 360 kiB floppies and floppy images.

errors={panic|continue|remount-ro}

Specify FAT behavior on critical errors: panic, continue without doing anything, or remount the partition in read-only mode (default behavior).

fat={12|16|32}

Specify a 12, 16 or 32 bit fat. This overrides the automatic FAT type detection routine. Use with caution!

iocharset=value

Character set to use for converting between 8 bit characters and 16 bit Unicode characters. The default is iso8859-1. Long filenames are stored on disk in Unicode format.

nfs={stale_rw|nostale_ro}

Enable this only if you want to export the FAT filesystem over NFS.

stale_rw: This option maintains an index (cache) of directory inodes which is used by the nfs-related code to improve look-ups. Full file operations (read/write) over NFS are supported but with cache eviction at NFS server, this could result in spurious ESTALE errors.

nostale_ro: This option bases the inode number and file handle on the on-disk location of a file in the FAT directory entry. This ensures that ESTALE will not be returned after a file is evicted from the inode cache. However, it means that operations such as rename, create and unlink could cause file handles that previously pointed at one file to point at a different file, potentially causing data corruption. For this reason, this option also mounts the filesystem readonly.

To maintain backward compatibility, '-o nfs' is also accepted, defaulting to stale_rw.

tz=UTC

This option disables the conversion of timestamps between local time (as used by Windows on FAT) and UTC (which Linux uses internally). This is particularly useful when mounting devices (like digital cameras) that are set to UTC in order to avoid the pitfalls of local time.

time_offset=minutes

Set offset for conversion of timestamps from local time used by FAT to UTC. I.e., minutes will be subtracted from each timestamp to convert it to UTC used internally by Linux. This is useful when the time zone set in the kernel via settimeofday(2) is not the time zone used by the filesystem. Note that this option still does not provide correct time stamps in all cases in presence of DST - time stamps in a different DST setting will be off by one hour.

quiet

Turn on the quiet flag. Attempts to chown or chmod files do not return errors, although they fail. Use with caution!

rodir

FAT has the ATTR_RO (read-only) attribute. On Windows, the ATTR_RO of the directory will just be ignored, and is used only by applications as a flag (e.g. it's set for the customized folder).

If you want to use ATTR_RO as read-only flag even for the directory, set this option.

showexec

If set, the execute permission bits of the file will be allowed only if the extension part of the name is .EXE, .COM, or .BAT. Not set by default.

sys_immutable

If set, ATTR_SYS attribute on FAT is handled as IMMUTABLE flag on Linux. Not set by default.

flush

If set, the filesystem will try to flush to disk more early than normal. Not set by default.

usefree

Use the "free clusters" value stored on FSINFO. It'll be used to determine number of free clusters without scanning disk. But it's not used by default, because recent Windows don't update it correctly in some case. If you are sure the "free clusters" on FSINFO is correct, by this option you can avoid scanning disk.

dots, nodots, dotsOK=[yes|no]

Various misguided attempts to force Unix or DOS conventions onto a FAT filesystem.

Mount options for hfs¶

creator=cccc, type=cccc

Set the creator/type values as shown by the MacOS finder used for creating new files. Default values: '????'.

uid=n, gid=n

Set the owner and group of all files. (Default: the UID and GID of the current process.)

dir_umask=n, file_umask=n, umask=n

Set the umask used for all directories, all regular files, or all files and directories. Defaults to the umask of the current process.

session=n

Select the CDROM session to mount. Defaults to leaving that decision to the CDROM driver. This option will fail with anything but a CDROM as underlying device.

part=n

Select partition number n from the device. Only makes sense for CDROMs. Defaults to not parsing the partition table at all.

quiet

Don't complain about invalid mount options.

Mount options for hpfs¶

uid=value and gid=value

Set the owner and group of all files. (Default: the UID and GID of the current process.)

umask=value

Set the umask (the bitmask of the permissions that are not present). The default is the umask of the current process. The value is given in octal.

case={lower|asis}

Convert all files names to lower case, or leave them. (Default: case=lower.)

conv=mode

This option is obsolete and may fail or being ignored.

nocheck

Do not abort mounting when certain consistency checks fail.

Mount options for iso9660¶

ISO 9660 is a standard describing a filesystem structure to be used on CD-ROMs. (This filesystem type is also seen on some DVDs. See also the udf filesystem.)

Normal iso9660 filenames appear in a 8.3 format (i.e., DOS-like restrictions on filename length), and in addition all characters are in upper case. Also there is no field for file ownership, protection, number of links, provision for block/character devices, etc.

Rock Ridge is an extension to iso9660 that provides all of these UNIX-like features. Basically there are extensions to each directory record that supply all of the additional information, and when Rock Ridge is in use, the filesystem is indistinguishable from a normal UNIX filesystem (except that it is read-only, of course).

norock

Disable the use of Rock Ridge extensions, even if available. Cf. map.

nojoliet

Disable the use of Microsoft Joliet extensions, even if available. Cf. map.

check={r[elaxed]|s[trict]}

With check=relaxed, a filename is first converted to lower case before doing the lookup. This is probably only meaningful together with norock and map=normal. (Default: check=strict.)

uid=value and gid=value

Give all files in the filesystem the indicated user or group id, possibly overriding the information found in the Rock Ridge extensions. (Default: uid=0,gid=0.)

map={n[ormal]|o[ff]|a[corn]}

For non-Rock Ridge volumes, normal name translation maps upper to lower case ASCII, drops a trailing `;1', and converts `;' to `.'. With map=off no name translation is done. See norock. (Default: map=normal.) map=acorn is like map=normal but also apply Acorn extensions if present.

mode=value

For non-Rock Ridge volumes, give all files the indicated mode. (Default: read and execute permission for everybody.) Octal mode values require a leading 0.

unhide

Also show hidden and associated files. (If the ordinary files and the associated or hidden files have the same filenames, this may make the ordinary files inaccessible.)

block={512|1024|2048}

Set the block size to the indicated value. (Default: block=1024.)

conv=mode

This option is obsolete and may fail or being ignored.

cruft

If the high byte of the file length contains other garbage, set this mount option to ignore the high order bits of the file length. This implies that a file cannot be larger than 16 MB.

session=x

Select number of session on multisession CD.

sbsector=xxx

Session begins from sector xxx.

The following options are the same as for vfat and specifying them only makes sense when using discs encoded using Microsoft's Joliet extensions.

iocharset=value

Character set to use for converting 16 bit Unicode characters on CD to 8 bit characters. The default is iso8859-1.

utf8

Convert 16 bit Unicode characters on CD to UTF-8.

Mount options for jfs¶

iocharset=name

Character set to use for converting from Unicode to ASCII. The default is to do no conversion. Use iocharset=utf8 for UTF8 translations. This requires CONFIG_NLS_UTF8 to be set in the kernel .config file.

resize=value

Resize the volume to value blocks. JFS only supports growing a volume, not shrinking it. This option is only valid during a remount, when the volume is mounted read-write. The resize keyword with no value will grow the volume to the full size of the partition.

nointegrity

Do not write to the journal. The primary use of this option is to allow for higher performance when restoring a volume from backup media. The integrity of the volume is not guaranteed if the system abnormally ends.

integrity

Default. Commit metadata changes to the journal. Use this option to remount a volume where the nointegrity option was previously specified in order to restore normal behavior.

errors={continue|remount-ro|panic}

Define the behavior when an error is encountered. (Either ignore errors and just mark the filesystem erroneous and continue, or remount the filesystem read-only, or panic and halt the system.)

noquota|quota|usrquota|grpquota

These options are accepted but ignored.

Mount options for msdos¶

See mount options for fat. If the msdos filesystem detects an inconsistency, it reports an error and sets the file system read-only. The filesystem can be made writable again by remounting it.

Mount options for ncpfs¶

Just like nfs, the ncpfs implementation expects a binary argument (a struct ncp_mount_data) to the mount system call. This argument is constructed by ncpmount(8) and the current version of mount (2.12) does not know anything about ncpfs.

Mount options for ntfs¶

iocharset=name

Character set to use when returning file names. Unlike VFAT, NTFS suppresses names that contain nonconvertible characters. Deprecated.

nls=name

New name for the option earlier called iocharset.

utf8

Use UTF-8 for converting file names.

uni_xlate={0|1|2}

For 0 (or `no' or `false'), do not use escape sequences for unknown Unicode characters. For 1 (or `yes' or `true') or 2, use vfat-style 4-byte escape sequences starting with ":". Here 2 give a little-endian encoding and 1 a byteswapped bigendian encoding.

posix=[0|1]

If enabled (posix=1), the filesystem distinguishes between upper and lower case. The 8.3 alias names are presented as hard links instead of being suppressed. This option is obsolete.

uid=value, gid=value and umask=value

Set the file permission on the filesystem. The umask value is given in octal. By default, the files are owned by root and not readable by somebody else.

Mount options for overlay¶

Since Linux 3.18 the overlay pseudo filesystem implements a union mount for other filesystems.

An overlay filesystem combines two filesystems - an upper filesystem and a lower filesystem. When a name exists in both filesystems, the object in the upper filesystem is visible while the object in the lower filesystem is either hidden or, in the case of directories, merged with the upper object.

The lower filesystem can be any filesystem supported by Linux and does not need to be writable. The lower filesystem can even be another overlayfs. The upper filesystem will normally be writable and if it is it must support the creation of trusted.* extended attributes, and must provide a valid d_type in readdir responses, so NFS is not suitable.

A read-only overlay of two read-only filesystems may use any filesystem type. The options lowerdir and upperdir are combined into a merged directory by using:

mount -t overlay  overlay  \
  -olowerdir=/lower,upperdir=/upper,workdir=/work  /merged

lowerdir=directory

Any filesystem, does not need to be on a writable filesystem.

upperdir=directory

The upperdir is normally on a writable filesystem.

workdir=directory

The workdir needs to be an empty directory on the same filesystem as upperdir.

Mount options for reiserfs¶

Reiserfs is a journaling filesystem.

conv

Instructs version 3.6 reiserfs software to mount a version 3.5 filesystem, using the 3.6 format for newly created objects. This filesystem will no longer be compatible with reiserfs 3.5 tools.

hash={rupasov|tea|r5|detect}

Choose which hash function reiserfs will use to find files within directories.

hashed_relocation

Tunes the block allocator. This may provide performance improvements in some situations.

no_unhashed_relocation

Tunes the block allocator. This may provide performance improvements in some situations.

noborder

Disable the border allocator algorithm invented by Yury Yu. Rupasov. This may provide performance improvements in some situations.

nolog

Disable journaling. This will provide slight performance improvements in some situations at the cost of losing reiserfs's fast recovery from crashes. Even with this option turned on, reiserfs still performs all journaling operations, save for actual writes into its journaling area. Implementation of nolog is a work in progress.

notail

By default, reiserfs stores small files and `file tails' directly into its tree. This confuses some utilities such as LILO(8). This option is used to disable packing of files into the tree.

replayonly

Replay the transactions which are in the journal, but do not actually mount the filesystem. Mainly used by reiserfsck.

resize=number

A remount option which permits online expansion of reiserfs partitions. Instructs reiserfs to assume that the device has number blocks. This option is designed for use with devices which are under logical volume management (LVM). There is a special resizer utility which can be obtained from ftp://ftp.namesys.com/pub/reiserfsprogs.

user_xattr

Enable Extended User Attributes. See the attr(5) manual page.

acl

Enable POSIX Access Control Lists. See the acl(5) manual page.

barrier=none / barrier=flush

This disables / enables the use of write barriers in the journaling code. barrier=none disables, barrier=flush enables (default). This also requires an IO stack which can support barriers, and if reiserfs gets an error on a barrier write, it will disable barriers again with a warning. Write barriers enforce proper on-disk ordering of journal commits, making volatile disk write caches safe to use, at some performance penalty. If your disks are battery-backed in one way or another, disabling barriers may safely improve performance.

Mount options for ubifs¶

UBIFS is a flash filesystem which works on top of UBI volumes. Note that atime is not supported and is always turned off.

The device name may be specified as

The following mount options are available:

bulk_read

Enable bulk-read. VFS read-ahead is disabled because it slows down the file system. Bulk-Read is an internal optimization. Some flashes may read faster if the data are read at one go, rather than at several read requests. For example, OneNAND can do "read-while-load" if it reads more than one NAND page.

no_bulk_read

Do not bulk-read. This is the default.

chk_data_crc

Check data CRC-32 checksums. This is the default.

no_chk_data_crc.

Do not check data CRC-32 checksums. With this option, the filesystem does not check CRC-32 checksum for data, but it does check it for the internal indexing information. This option only affects reading, not writing. CRC-32 is always calculated when writing the data.

compr={none|lzo|zlib}

Select the default compressor which is used when new files are written. It is still possible to read compressed files if mounted with the none option.

Mount options for udf¶

UDF is the "Universal Disk Format" filesystem defined by OSTA, the Optical Storage Technology Association, and is often used for DVD-ROM, frequently in the form of a hybrid UDF/ISO-9660 filesystem. It is, however, perfectly usable by itself on disk drives, flash drives and other block devices. See also iso9660.

uid=

Make all files in the filesystem belong to the given user. uid=forget can be specified independently of (or usually in addition to) uid=<user> and results in UDF not storing uids to the media. In fact the recorded uid is the 32-bit overflow uid -1 as defined by the UDF standard. The value is given as either <user> which is a valid user name or the corresponding decimal user id, or the special string "forget".

gid=

Make all files in the filesystem belong to the given group. gid=forget can be specified independently of (or usually in addition to) gid=<group> and results in UDF not storing gids to the media. In fact the recorded gid is the 32-bit overflow gid -1 as defined by the UDF standard. The value is given as either <group> which is a valid group name or the corresponding decimal group id, or the special string "forget".

umask=

Mask out the given permissions from all inodes read from the filesystem. The value is given in octal.

mode=

If mode= is set the permissions of all non-directory inodes read from the filesystem will be set to the given mode. The value is given in octal.

dmode=

If dmode= is set the permissions of all directory inodes read from the filesystem will be set to the given dmode. The value is given in octal.

bs=

Set the block size. Default value prior to kernel version 2.6.30 was 2048. Since 2.6.30 and prior to 4.11 it was logical device block size with fallback to 2048. Since 4.11 it is logical block size with fallback to any valid block size between logical device block size and 4096.

For other details see the mkudffs(8) 2.0+ manpage, sections COMPATIBILITY and BLOCK SIZE.

unhide

Show otherwise hidden files.

undelete

Show deleted files in lists.

adinicb

Embed data in the inode. (default)

noadinicb

Don't embed data in the inode.

shortad

Use short UDF address descriptors.

longad

Use long UDF address descriptors. (default)

nostrict

Unset strict conformance.

iocharset=

Set the NLS character set. This requires kernel compiled with CONFIG_UDF_NLS option.

utf8

Set the UTF-8 character set.

Mount options for debugging and disaster recovery¶

novrs

Ignore the Volume Recognition Sequence and attempt to mount anyway.

session=

Select the session number for multi-session recorded optical media. (default= last session)

anchor=

Override standard anchor location. (default= 256)

lastblock=

Set the last block of the filesystem.

Unused historical mount options that may be encountered and should be removed¶

uid=ignore

Ignored, use uid=<user> instead.

gid=ignore

Ignored, use gid=<group> instead.

volume=

Unimplemented and ignored.

partition=

Unimplemented and ignored.

fileset=

Unimplemented and ignored.

rootdir=

Unimplemented and ignored.

Mount options for ufs¶

ufstype=value

UFS is a filesystem widely used in different operating systems. The problem are differences among implementations. Features of some implementations are undocumented, so its hard to recognize the type of ufs automatically. That's why the user must specify the type of ufs by mount option. Possible values are:

onerror=value

Set behavior on error:

Mount options for umsdos¶

See mount options for msdos. The dotsOK option is explicitly killed by umsdos.

Mount options for vfat¶

First of all, the mount options for fat are recognized. The dotsOK option is explicitly killed by vfat. Furthermore, there are

uni_xlate

Translate unhandled Unicode characters to special escaped sequences. This lets you backup and restore filenames that are created with any Unicode characters. Without this option, a '?' is used when no translation is possible. The escape character is ':' because it is otherwise invalid on the vfat filesystem. The escape sequence that gets used, where u is the Unicode character, is: ':', (u & 0x3f), ((u>>6) & 0x3f), (u>>12).

posix

Allow two files with names that only differ in case. This option is obsolete.

nonumtail

First try to make a short name without sequence number, before trying name~num.ext.

utf8

UTF8 is the filesystem safe 8-bit encoding of Unicode that is used by the console. It can be enabled for the filesystem with this option or disabled with utf8=0, utf8=no or utf8=false. If `uni_xlate' gets set, UTF8 gets disabled.

shortname=mode

Defines the behavior for creation and display of filenames which fit into 8.3 characters. If a long name for a file exists, it will always be the preferred one for display. There are four modes:

Mount options for usbfs¶

devuid=uid and devgid=gid and devmode=mode

Set the owner and group and mode of the device files in the usbfs filesystem (default: uid=gid=0, mode=0644). The mode is given in octal.

busuid=uid and busgid=gid and busmode=mode

Set the owner and group and mode of the bus directories in the usbfs filesystem (default: uid=gid=0, mode=0555). The mode is given in octal.

listuid=uid and listgid=gid and listmode=mode

Set the owner and group and mode of the file devices (default: uid=gid=0, mode=0444). The mode is given in octal.