2. EL 9
  3. opa-basic-tools
  4. opasmaquery(1)

Scroll to navigation

opasmaquery(1) IFSFFCLIRG (Man Page) opasmaquery(1)

NAME

opasmaquery

(All) Performs Intel(R) Omni-Path Architecture-defined SMA queries and displays the resulting response. Each query is issued directly to the SMA and does not involve SM interaction.

Syntax

opasmaquery [-v] [-d detail][-g] [-l lid] [-h hfi] [-p port] [-o otype]
[-m port| port1,port2] [-f flid] [-b block[,count]] [hop hop ...]

Options

Produces full help text.

Returns verbose output. Can be specified more than once for additional openib and libibumad debugging.

Specifies the output detail level for cableinfo only. Range is 0 - n. Default is 2. An upper limit for detail level is not enforced. After a maximum amount of output is reached, a larger detail value has no effect.

Displays line-by-line format. Default is summary format.

Specifies the destination LID. Default is local port.

Specifies the HFI, numbered 1..n. Using 0 specifies that the -p port port is a system-wide port number. Default is 0.

Specifies the port, numbered 1..n. Using 0 specifies the first active port. Default is 0.

Specifies the output type. Default is nodeinfo. Refer to otype Options Vary by Report for supported options.

Valid output types are:

bfrctrl Specifies buffer control tables.

[-m dest_port] [-m port1,port2]

cableinfo Specifies cable information.

[-d detail] [-m dest_port] [-b block[,count]]

conginfo Specifies congestion information.

desc or nodedesc Specifies node descriptions/names.

hficongcon Specifies HFI congestion control settings.

[-b block[,count]] [-f flid]

hficonglog Specifies HFI congestion logs.

[-b block[,count]]

hficongset Specifies HFI congestion settings.

linfdb Specifies switch linear forwarding database (FDB) tables.

[-b block[,count]] [-f flid]

mcfdb Specifies switch multicast FDB tables.

[-m dest_port] [-b block[,count]] [-f flid]

portgroup Specifies Adaptive Routing port groups.

[-b block[,count]]

portgroupfdb Specifies Adaptive Routing port group FWD tables.

[-b block[,count]] [-f flid]

nodeaggr Specifies node information and node descriptions.

node or nodeinfo Specifies node information.

[-m dest_port]

portinfo Specifies port information.

[-m dest_port]

pstateinfo Specifies switch port state information.

[-m dest_port] [-m port1,port2]

pkey Specifies P-Key tables.

[-m dest_port] [-b block[,count]]

slsc Specifies SL to SC mapping tables.

scsl Specifies SC to SL mapping tables.

scsc Specifies SC to SC mapping tables.

[-m dest_port] [-m port1,port2]

scvlt Specifies SC to VLt tables.

[-m dest_port] [-m port1,port2]

scvlnt Specifies SC to VLnt tables.

[-m dest_port] [-m port1,port2]

scvlr Specifies SC to VLr tables

[-m dest_port] [-m port1,port2]

sminfo Specifies SM information.

swaggr Specifies node information and switch information.

swconglog Specifies switch congestion logs.

[-b block[,count]]

swcongset Specifies switch congestion settings.

swinfo Specifies switch information.

swportcong Specifies switch congestion settings.

[-b block[,count]]

vlarb Specifies VL arbitration tables.

[-m dest_port]

ibnodeinfo Specifies IB node information.

ledinfo Specifies LED information.

[-m dest_port]

-h and -p options permit a variety of selections:

First active port in system (Default).

First active port in system.

First active port on HFI x.

First active port on HFI x.

Port y within system (no matter which ports are active).

HFI x, port y.

otype Options Vary by Report

[-m port|port1,port2] [-f lid] [-b block[,count]]

Specifies the port in destination device to query.

For some reports, specifies a range of ports between port1 and port2. For others, this describes an inport/outport pair.

Specifies the LID to look up in forwarding table to select which LFT or MFT block to display. Default is to show entire table.

Specifies the block number of either GUIDs or pkey, and the number of blocks to display. Default is to show entire table.

For example:

-b block Displays all of block block of a larger table.

-b block,count Displays count blocks of data starting with block block.

-b, count Displays count blocks of data starting with block 0.

Examples

opasmaquery -o desc -l 6

# get nodedesc via lid routed

opasmaquery -o nodedesc 1 3

# get nodedesc via directed route (2 dr hops)

opasmaquery -o nodeinfo -l 2 3

# get nodeinfo via a combination of lid routed and # directed route (1 dr hop)

opasmaquery -o portinfo

# get local port info

opasmaquery -o portinfo -l 6 -m 1

# get port info of port 1 of lid 6

opasmaquery -o pkey -l 2 3

# get pkey table entries starting (lid routed to lid 2,

# then 1 dr hop to port 3)

opasmaquery -o vlarb -l 6

# get vlarb table entries from lid 6

opasmaquery -o swinfo -l 2

# get switch info

opasmaquery -o sminfo -l 1

# get SM info

opasmaquery -o slsc -l 3

# get sl2sc table entries from lid 3

opasmaquery -o scsl -l 3

# get sc2sl table entries from lid 3

Intel Corporation Copyright(C) 2015-2019