NAME¶

Tk::Spinbox - Create and manipulate Spinbox widgets

SYNOPSIS¶

$spinbox = $parent->Spinbox(?options?);

 -activebackground    -highlightthickness -repeatinterval
 -background          -insertbackground   -selectbackground
 -borderwidth         -insertborderwidth  -selectborderwidth
 -cursor              -insertontime       -selectforeground
 -exportselection     -insertwidth        -takefocus
 -font                -insertofftime      -textvariable
 -foreground          -justify            -xscrollcommand
 -highlightbackground -relief
 -highlightcolor      -repeatdelay

WIDGET-SPECIFIC OPTIONS¶

Option: -buttonbackground

Name: buttonBackground

Class: Background

The background color to be used for the spin buttons.

Option: -buttoncursor

Name: buttonCursor

Class: Cursor

The cursor to be used when over the spin buttons. If this is empty (the default), a default cursor will be used.

Option: -buttondownrelief

Name: buttonDownRelief

Class: Relief

The relief to be used for the upper spin button.

Option: -buttonuprelief

Name: buttonUpRelief

Class: Relief

The relief to be used for the lower spin button.

Option: -command

Name: command

Class: Command

Specifies a Perl/Tk callback to invoke whenever a Spinbutton is invoked. The callback has these two arguments appended to any existing callback arguments: the current value of the widget and the direction of the button press (up or down).

Option: -disabledbackground

Name: disabledBackground

Class: DisabledBackground

Specifies the background color to use when the Spinbox is disabled. If this option is the empty string, the normal background color is used.

Option: -disabledforeground

Name: disabledForeground

Class: DisabledForeground

Specifies the foreground color to use when the Spinbox is disabled. If this option is the empty string, the normal foreground color is used.

Option: -format

Name: format

Class: Format

Specifies an alternate format to use when setting the string value when using the -from and -to range. This must be a format specifier of the form %<pad>.<pad>f, as it will format a floating-point number.

Option: -from

Name: from

Class: From

A floating-point value corresponding to the lowest value for a Spinbox, to be used in conjunction with -to and -increment. When all are specified correctly, the Spinbox will use these values to control its contents. This value must be less than the -to option. If -values is specified, it supercedes this option.

Option: -invalidcommand

Alias: -invcmd

Name: invalidCommand

Class: InvalidCommand

Specifies a script to eval when validateCommand returns 0. Setting it to an empty string disables this feature (the default). The best use of this option is to set it to bell. See Validation below for more information.

Option: -increment

Name: increment

Class: Increment

A floating-point value specifying the increment. When used with -from and -to, the value in the widget will be adjusted by -increment when a spin button is pressed (up adds the value, down subtracts the value).

Option: -readonlybackground

Name: readonlyBackground

Class: ReadonlyBackground

Specifies the background color to use when the Spinbox is readonly. If this option is the empty string, the normal background color is used.

Option: -state

Name: state

Class: State

Specifies one of three states for the Spinbox: normal, disabled, or readonly. If the Spinbox is readonly, then the value may not be changed using methods and no insertion cursor will be displayed, even if the input focus is in the widget; the contents of the widget may still be selected. If the Spinbox is disabled, the value may not be changed, no insertion cursor will be displayed, the contents will not be selectable, and the Spinbox may be displayed in a different color, depending on the values of the -disabledforeground and -disabledbackground options.

Option: -to

Name: to

Class: To

A floating-point value corresponding to the highest value for the Spinbox, to be used in conjunction with -from and -increment. When all are specified correctly, the Spinbox will use these values to control its contents. This value must be greater than the -from option. If -values is specified, it supercedes this option.

Option: -validate

Name: validate

Class: Validate

Specifies the mode in which validation should operate: none, focus, focusin, focusout, key, or all. It defaults to none. When you want validation, you must explicitly state which mode you wish to use. See Validation below for more.

Option: -validatecommand

Alias: -vcmd

Name: validateCommand

Class: ValidateCommand

Specifies a script to evaluate when you want to validate the input in the widget. Setting it to an empty string disables this feature (the default). Validation occurs according to the value of -validate. This command must return a valid boolean value. If it returns 0 (or the valid boolean equivalent) then the value of the widget will not change and the invalidCommand will be evaluated if it is set. If it returns 1, then value will be changed. See Validation below for more information.

Option: -values

Name: values

Class: Values

Must be a proper list value. If specified, the Spinbox will use these values as to control its contents, starting with the first value. This option has precedence over the -from and -to range.

Option: -width

Name: width

Class: Width

Specifies an integer value indicating the desired width of the Spinbox window, in average-size characters of the widget's font. If the value is less than or equal to zero, the widget picks a size just large enough to hold its current text.

Option: -wrap

Name: wrap

Class: Wrap

Must be a proper boolean value. If on, the Spinbox will wrap around the values of data in the widget.

DESCRIPTION¶

The Spinbox method creates a new window (given by the $spinbox argument) and makes it into a Spinbox widget. Additional options, described above, may be specified on the command line or in the option database to configure aspects of the Spinbox such as its colors, font, and relief.

A Spinbox is an extended Entry widget that allows he user to move, or spin, through a fixed set of ascending or descending values such as times or dates in addition to editing the value as in an entry. When first created, a Spinbox's string is empty. A portion of the Spinbox may be selected as described below. If a Spinbox is exporting its selection (see the exportSelection option), then it will observe the standard protocols for handling the selection; Spinbox selections are available as type STRING. Spinboxes also observe the standard Tk rules for dealing with the input focus. When a Spinbox has the input focus it displays an insertion cursor to indicate where new characters will be inserted.

Spinboxes are capable of displaying strings that are too long to fit entirely within the widget's window. In this case, only a portion of the string will be displayed; commands described below may be used to change the view in the window. Spinboxes use the standard -xscrollcommand mechanism for interacting with scrollbars (see the description of the -xscrollcommand option for details). They also support scanning, as described below.

VALIDATION¶

Validation works by setting the validateCommand option to a callback which will be evaluated according to the validate option as follows:

none

Default. This means no validation will occur.

focus

validateCommand will be called when the Spinbox receives or loses focus.

focusin

validateCommand will be called when the Spinbox receives focus.

focusout

validateCommand will be called when the Spinbox loses focus.

key

validateCommand will be called when the Spinbox is edited.

all

validateCommand will be called for all above conditions.

The validateCommand and invalidCommand callbacks are invoked with at least 5 positional arguments, which are appended to any already existing callback arguments:

 my $val = $spinbox->cget(-validate);
 $spinbox->configure(-validate => $val);

WIDGET METHODS¶

The Spinbox command creates a widget object whose name is $widget. This command may be used to invoke various operations on the widget. It has the following general form:

 $widget->method(?arg arg ...?);

Many of the methods for Spinboxes take one or more indices as arguments. An index specifies a particular character in the Spinbox's string, in any of the following ways:

number

Specifies the character as a numerical index, where 0 corresponds to the first character in the string.

anchor

Indicates the anchor point for the selection, which is set with the select from and select adjust methods.

end

Indicates the character just after the last one in the Spinbox's string. This is equivalent to specifying a numerical index equal to the length of the Spinbox's string.

insert

Indicates the character adjacent to and immediately following the insertion cursor.

sel.first

Indicates the first character in the selection. It is an error to use this form if the selection isn't in the Spinbox window.

sel.last

Indicates the character just after the last one in the selection. It is an error to use this form if the selection isn't in the Spinbox window.

@number

In this form, number is treated as an x-coordinate in the Spinbox's window; the character spanning that x-coordinate is used. For example, ``@0'' indicates the left-most character in the window.

Abbreviations may be used for any of the forms above, e.g. ``e'' or ``sel.f''. In general, out-of-range indices are automatically rounded to the nearest legal value.

The following commands are possible for Spinbox widgets:

$widget->bbox(index);

Returns a list of four numbers describing the bounding box of the character given by index. The first two elements of the list give the x and y coordinates of the upper-left corner of the screen area covered by the character (in pixels relative to the widget) and the last two elements give the width and height of the character, in pixels. The bounding box may refer to a region outside the visible area of the window.

$widget->cget(option);

Returns the current value of the configuration option given by option. Option may have any of the values accepted by the Spinbox command.

$widget->configure(?option?, ?value, option, value, ...?);

Query or modify the configuration options of the widget. If no option is specified, returns a list describing all of the available options for $widget (see Tk::configure for information on the format of this list). If option is specified with no value, then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no option is specified). If one or more option-value pairs are specified, then the command modifies the given widget option(s) to have the given value(s); in this case the command returns an empty string. Option may have any of the values accepted by the Spinbox command.

$widget->delete(first, ?last?);

Delete one or more elements of the Spinbox. First is the index of the first character to delete, and last is the index of the character just after the last one to delete. If last isn't specified it defaults to first+1, i.e. a single character is deleted. This command returns an empty string.

$widget->get;

Returns the Spinbox's string.

$widget->icursor(index);

Arrange for the insertion cursor to be displayed just before the character given by index. Returns an empty string.

$widget->identify(x, y);

Returns the name of the window element corresponding to coordinates x and y in the Spinbox. Return value is one of: none, buttondown, buttonup, entry.

$widget->index(index);

Returns the numerical index corresponding to index.

$widget->insert(index, string);

Insert the characters of string just before the character indicated by index. Returns an empty string.

$widget->invoke(element);

Causes the specified element, either buttondown or buttonup, to be invoked, triggering the action associated with it.

$widget->scan(option, args);

This command is used to implement scanning on Spinboxes. It has two forms, depending on option:

$widget->selection(option, arg);

This command is used to adjust the selection within a Spinbox. It has several forms, depending on option:

$widget->set(?string?);

If string is specified, the Spinbox will try and set it to this value, otherwise it just returns the Spinbox's string. If validation is on, it will occur when setting the string.

$widget->validate;

This command is used to force an evaluation of the validateCommand independent of the conditions specified by the validate option. This is done by temporarily setting the validate option to all. It returns 0 or 1.

$widget->xview(args);

This command is used to query and change the horizontal position of the text in the widget's window. It can take any of the following forms:

DEFAULT BINDINGS¶

Tk automatically creates class bindings for Spinboxes that give them the following default behavior. In the descriptions below, ``word'' refers to a contiguous group of letters, digits, or ``_'' characters, or any single character other than these.

[1]

Clicking mouse button 1 positions the insertion cursor just before the character underneath the mouse cursor, sets the input focus to this widget, and clears any selection in the widget. Dragging with mouse button 1 strokes out a selection between the insertion cursor and the character under the mouse.

[2]

Double-clicking with mouse button 1 selects the word under the mouse and positions the insertion cursor at the beginning of the word. Dragging after a double click will stroke out a selection consisting of whole words.

[3]

Triple-clicking with mouse button 1 selects all of the text in the Spinbox and positions the insertion cursor before the first character.

[4]

The ends of the selection can be adjusted by dragging with mouse button 1 while the Shift key is down; this will adjust the end of the selection that was nearest to the mouse cursor when button 1 was pressed. If the button is double-clicked before dragging then the selection will be adjusted in units of whole words.

[5]

Clicking mouse button 1 with the Control key down will position the insertion cursor in the Spinbox without affecting the selection.

[6]

If any normal printing characters are typed in a Spinbox, they are inserted at the point of the insertion cursor.

[7]

The view in the Spinbox can be adjusted by dragging with mouse button 2. If mouse button 2 is clicked without moving the mouse, the selection is copied into the Spinbox at the position of the mouse cursor.

[8]

If the mouse is dragged out of the Spinbox on the left or right sides while button 1 is pressed, the Spinbox will automatically scroll to make more text visible (if there is more text off-screen on the side where the mouse left the window).

[9]

The Left and Right keys move the insertion cursor one character to the left or right; they also clear any selection in the Spinbox and set the selection anchor. If Left or Right is typed with the Shift key down, then the insertion cursor moves and the selection is extended to include the new character. Control-Left and Control-Right move the insertion cursor by words, and Control-Shift-Left and Control-Shift-Right move the insertion cursor by words and also extend the selection. Control-b and Control-f behave the same as Left and Right, respectively. Meta-b and Meta-f behave the same as Control-Left and Control-Right, respectively.

[10]

The Home key, or Control-a, will move the insertion cursor to the beginning of the Spinbox and clear any selection in the Spinbox. Shift-Home moves the insertion cursor to the beginning of the Spinbox and also extends the selection to that point.

[11]

The End key, or Control-e, will move the insertion cursor to the end of the Spinbox and clear any selection in the Spinbox. Shift-End moves the cursor to the end and extends the selection to that point.

[12]

The Select key and Control-Space set the selection anchor to the position of the insertion cursor. They don't affect the current selection. Shift-Select and Control-Shift-Space adjust the selection to the current position of the insertion cursor, selecting from the anchor to the insertion cursor if there was not any selection previously.

[13]

Control-/ selects all the text in the Spinbox.

[14]

Control-\ clears any selection in the Spinbox.

[15]

The F16 key (labelled Copy on many Sun workstations) or Meta-w copies the selection in the widget to the clipboard, if there is a selection.

[16]

The F20 key (labelled Cut on many Sun workstations) or Control-w copies the selection in the widget to the clipboard and deletes the selection. If there is no selection in the widget then these keys have no effect.

[17]

The F18 key (labelled Paste on many Sun workstations) or Control-y inserts the contents of the clipboard at the position of the insertion cursor.

[18]

The Delete key deletes the selection, if there is one in the Spinbox. If there is no selection, it deletes the character to the right of the insertion cursor.

[19]

The BackSpace key and Control-h delete the selection, if there is one in the Spinbox. If there is no selection, it deletes the character to the left of the insertion cursor.

[20]

Control-d deletes the character to the right of the insertion cursor.

[21]

Meta-d deletes the word to the right of the insertion cursor.

[22]

Control-k deletes all the characters to the right of the insertion cursor.

[23]

Control-t reverses the order of the two characters to the right of the insertion cursor.

If the Spinbox is disabled using the -state option, then the Spinbox's view can still be adjusted and text in the Spinbox can still be selected, but no insertion cursor will be displayed and no text modifications will take place.

The behavior of Spinboxes can be changed by defining new bindings for individual widgets or by redefining the class bindings.

KEYWORDS¶

Spinbox, Entry, widget