NAME¶

bitlbee_selinux - Security Enhanced Linux Policy for the bitlbee processes

DESCRIPTION¶

Security-Enhanced Linux secures the bitlbee processes via flexible mandatory access control.

The bitlbee processes execute with the bitlbee_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep bitlbee_t

ENTRYPOINTS¶

The bitlbee_t SELinux type can be entered via the bitlbee_exec_t file type.

The default entrypoint paths for the bitlbee_t domain are the following:

/usr/bin/bip, /usr/sbin/bitlbee

PROCESS TYPES¶

SELinux defines process types (domains) for each process running on the system

You can see the context of a process using the -Z option to ps

Policy governs the access confined processes have to files. SELinux bitlbee policy is very flexible allowing users to setup their bitlbee processes in as secure a method as possible.

The following process types are defined for bitlbee:

bitlbee_t

Note: semanage permissive -a bitlbee_t can be used to make the process type bitlbee_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

BOOLEANS¶

SELinux policy is customizable based on least access required. bitlbee policy is extremely flexible and has several booleans that allow you to manipulate the policy and run bitlbee with the tightest access possible.

If you want to dontaudit all daemons scheduling requests (setsched, sys_nice), you must turn on the daemons_dontaudit_scheduling boolean. Enabled by default.

setsebool -P daemons_dontaudit_scheduling 1

If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

setsebool -P fips_mode 1

If you want to allow system to run with NIS, you must turn on the nis_enabled boolean. Disabled by default.

setsebool -P nis_enabled 1

MANAGED FILES¶

The SELinux process type bitlbee_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.

bitlbee_tmp_t

bitlbee_var_run_t

/var/run/bip(/.*)?
/var/run/bitlbee.pid
/var/run/bitlbee.sock

bitlbee_var_t

/var/lib/bitlbee(/.*)?

cluster_conf_t

/etc/cluster(/.*)?

cluster_var_lib_t

/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?

cluster_var_run_t

/var/run/crm(/.*)?
/var/run/cman_.*
/var/run/rsctmp(/.*)?
/var/run/aisexec.*
/var/run/heartbeat(/.*)?
/var/run/pcsd-ruby.socket
/var/run/corosync-qnetd(/.*)?
/var/run/corosync-qdevice(/.*)?
/var/run/pcsd.socket
/var/run/corosync.pid
/var/run/cpglockd.pid
/var/run/rgmanager.pid
/var/run/cluster/rgmanager.sk

krb5_host_rcache_t

/var/tmp/krb5_0.rcache2
/var/cache/krb5rcache(/.*)?
/var/tmp/nfs_0
/var/tmp/DNS_25
/var/tmp/host_0
/var/tmp/imap_0
/var/tmp/HTTP_23
/var/tmp/HTTP_48
/var/tmp/ldap_55
/var/tmp/ldap_487
/var/tmp/ldapmap1_0

root_t

/sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
/
/initrd

FILE CONTEXTS¶

SELinux requires files to have an extended attribute to define the file type.

You can see the context of a file using the -Z option to ls

Policy governs the access confined processes have to these files. SELinux bitlbee policy is very flexible allowing users to setup their bitlbee processes in as secure a method as possible.

STANDARD FILE CONTEXT

SELinux defines the file context types for the bitlbee, if you wanted to store files with these types in a different paths, you need to execute the semanage command to specify alternate labeling and then use restorecon to put the labels on disk.

semanage fcontext -a -t bitlbee_var_run_t '/srv/mybitlbee_content(/.*)?'
restorecon -R -v /srv/mybitlbee_content

Note: SELinux often uses regular expressions to specify labels that match multiple files.

The following file types are defined for bitlbee:

bitlbee_conf_t

- Set files with the bitlbee_conf_t type, if you want to treat the files as bitlbee configuration data, usually stored under the /etc directory.

bitlbee_exec_t

- Set files with the bitlbee_exec_t type, if you want to transition an executable to the bitlbee_t domain.

Paths:

/usr/bin/bip, /usr/sbin/bitlbee

bitlbee_initrc_exec_t

- Set files with the bitlbee_initrc_exec_t type, if you want to transition an executable to the bitlbee_initrc_t domain.

bitlbee_log_t

- Set files with the bitlbee_log_t type, if you want to treat the data as bitlbee log data, usually stored under the /var/log directory.

bitlbee_tmp_t

- Set files with the bitlbee_tmp_t type, if you want to store bitlbee temporary files in the /tmp directories.

bitlbee_var_run_t

- Set files with the bitlbee_var_run_t type, if you want to store the bitlbee files under the /run or /var/run directory.

Paths:

/var/run/bip(/.*)?, /var/run/bitlbee.pid, /var/run/bitlbee.sock

bitlbee_var_t

- Set files with the bitlbee_var_t type, if you want to store the bit files under the /var directory.

Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.

COMMANDS¶

semanage fcontext can also be used to manipulate default file context mappings.

semanage permissive can also be used to manipulate whether or not a process type is permissive.

semanage module can also be used to enable/disable/install/remove policy modules.

semanage boolean can also be used to manipulate the booleans

system-config-selinux is a GUI tool available to customize SELinux policy settings.

AUTHOR¶

This manual page was auto-generated using sepolicy manpage .

SEE ALSO¶

selinux(8), bitlbee(8), semanage(8), restorecon(8), chcon(1), sepolicy(8), setsebool(8)