NAME¶

virt-top - 'top'-like utility for virtualization stats

SUMMARY¶

virt-top [-options]

DESCRIPTION¶

virt-top is a top(1)-like utility for showing stats of virtualized domains. Many keys and command line options are the same as for ordinary top.

It uses libvirt so it is capable of showing stats across a variety of different virtualization systems.

OPTIONS¶

-1

Display physical CPUs by default (instead of domains).

Under each domain column, two numbers are shown. The first is the percentage of the physical CPU used by the domain and the hypervisor together. The second is the percentage used by just the domain.

When virt-top is running, use the 1 key to toggle between physical CPUs and domains display.

-2

Display network interfaces by default (instead of domains). When virt-top is running, use the 2 key to toggle between network interfaces and domains display.

-3

Display block devices (virtual disks) by default (instead of domains). When virt-top is running, use the 3 key to toggle between block devices and domains display.

-b

Batch mode. In this mode keypresses are ignored.

-c uri or --connect uri

Connect to the libvirt URI given.

To connect to QEMU/KVM you would normally do -c qemu:///system

To connect to Xen on the same host, do -c xen:///

To connect to libvirtd on a remote machine you would normally do -c qemu://host/system

If this option is not given then virt-top connects by default to whatever is the default hypervisor for libvirt, although this can be overridden by setting environment variables.

See the libvirt documentation at <http://libvirt.org/uri.html> for further information.

-d delay

Set the delay between screen updates in seconds. The default is 3.0 seconds. You can change this while virt-top is running by pressing either s or d key.

-n iterations

Set the number of iterations to run. The default is to run continuously.

-o sort

Set the sort order to one of: cpu (sort by %CPU used), mem (sort by total memory), time (sort by total time), id (sort by domain ID), name (sort by domain name), netrx (sort by network received bytes), nettx (sort by network transmitted bytes), blockrdrq (sort by block device [disk] read requests), blockwrrq (sort by block device [disk] write requests).

While virt-top is running you can change the sort order using keys P (cpu), M (memory), T (total time), N (domain ID), F (interactively select the sort field).

-s

Secure mode. Currently this does nothing.

--hist-cpu secs

Set the time in seconds between updates of the historical %CPU at the top right of the display.

--csv file.csv

Write the statistics to file file.csv. First a header is written showing the statistics being recorded in each column, then one line is written for each screen update. The CSV file can be loaded directly by most spreadsheet programs.

Currently the statistics which this records vary between releases of virt-top (but the column headers will stay the same, so you can use those to process the CSV file).

To save space you can compress your CSV files (if your shell supports this feature, eg. bash):

 virt-top --csv >(gzip -9 > output.csv.gz)
    

You can use a similar trick to split the CSV file up. In this example the CSV file is split every 1000 lines into files called output.csv.00, output.csv.01 etc.

 virt-top --csv >(split -d -l 1000 - output.csv.)
    

RHEL provides a short Python script called "processcsv.py" which can be used to post-process the CSV output. Run it like this:

 virt-top --csv data.csv
 processcsv.py < data.csv
    

This creates or overwrites the following files in the current directory:

 global.csv
 domain<NNN>.csv
    

"global.csv" will contain the global data. One "domain<NNN>.csv" file will also be created for each domain with ID "NNN", containing the per-domain data.

--no-csv-cpu

Disable domain CPU stats in CSV output.

--no-csv-mem

Disable domain memory stats in CSV output.

--no-csv-block

Disable domain block device stats in CSV output.

--no-csv-net

Disable domain network interface stats in CSV output.

--debug filename

Send debug and error messages to filename. To send error messages to syslog you can do:

 virt-top --debug >(logger -t virt-top)
    

See also REPORTING BUGS below.

--init-file filename

Read filename as the init file instead of the default which is $HOME/.virt-toprc. See also INIT FILE below.

--no-init-file

Do not read any init file.

--script

Script mode. There will be no user interface. This is most useful when used together with the --csv and -n options.

--stream

Stream mode. All output is sent to stdout. This can be used from shell scripts etc. There is no user interface.

--block-in-bytes

Show I/O statistics in Bytes. Default is shown in the number of Requests.

--end-time time

The program will exit at the time given.

The time may be given in one of the following formats:

 virt-top --end-time +00:03:00

 virt-top --end-time +180

--help

Display usage summary.

--version

Display version number and exit.

KEYS¶

Note that keys are case sensitive. For example use upper-case P (shift P) to sort by %CPU. ^ before a key means a Ctrl key, so ^L is Ctrl L.

space or ^L

Updates the display.

q

Quits the program.

h

Displays help.

s or d

Change the delay between screen updates.

B

Toggle Block I/O statistics so they are shown in either bytes or requests.

0 (number 0)

Show the normal list of domains display.

1 (number 1)

Toggle into showing physical CPUs. If pressed again toggles back to showing domains (the normal display).

2

Toggle into showing network interfaces. If pressed again toggles back to showing domains.

3

Toggle into showing block devices (virtual disks). If pressed again toggles back to showing domains.

P

Sort by %CPU.

M

Sort by total memory. Note that this shows the total memory allocated to the guest, not the memory being used.

T

Sort by total time.

N

Sort by domain ID.

F

Select the sort field interactively (there are other sort fields you can choose using this key).

W

This creates or overwrites the init file with the current settings.

This key is disabled if --no-init-file was specified on the command line or if overwrite-init-file false is given in the init file.

INIT FILE¶

When virt-top starts up, it reads initial settings from the file .virt-toprc in the user's home directory.

The name of this file may be overridden using the --init-file filename command line option or may be disabled entirely using --no-init-file.

The init file has a simple format. Blank lines and comments beginning with # are ignored. Everything else is a set of key value pairs, described below.

display task|pcpu|block|net

Sets the major display mode to one of task (tasks, the default), pcpu (physical CPUs), block (block devices), or net (network interfaces).

delay secs

Sets the delay between display updates in seconds.

hist-cpu secs

Sets the historical CPU delay in seconds.

iterations n

Sets the number of iterations to run before we exit. Setting this to -1 means to run continuously.

sort cpu|mem|time|id|name|...

Sets the sort order. The option names are the same as for the command line -o option.

connect uri

Sets the default connection URI.

debug filename

Sets the default filename to use for debug and error messages.

csv filename

Enables CSV output to the named file.

csv-cpu true|false

Enable or disable domain CPU stats in CSV output.

csv-mem true|false

Enable or disable domain memory stats in CSV output.

csv-block true|false

Enable or disable domain block device stats in CSV output.

csv-net true|false

Enable or disable domain network interface stats in CSV output.

batch true|false

Sets batch mode.

secure true|false

Sets secure mode.

script true|false

Sets script mode.

stream true|false

Sets stream mode.

block-in-bytes true|false

Show block device statistics in bytes.

end-time time

Set the time at which the program exits. See above for the time formats supported.

overwrite-init-file false

If set to false then the W key will not overwrite the init file.

Note that in the current implementation, options specified in the init file override options specified on the command line. This is a bug and this behaviour may change in the future.

COLUMN HEADINGS¶

%CPU

Percentage of CPU used. As with top(1), 100% means that all physical CPUs are being fully used.

DEVICE

The block device name.

DOMAIN

NAME

The name of the libvirt domain.

ID

The libvirt domain ID.

INTERFACE

The network interface name.

%MEM

The percentage of host memory assigned to the guest.

PHYCPU

The physical CPU.

RDBY

Disk bytes read since last displayed.

RDRQ

Disk read requests since last displayed.

RXBY

Network bytes received since last displayed.

RXPK

Network packets received since last displayed.

S

The state of the domain, one of:

TIME

Total CPU time used.

TXBY

Network bytes transmitted since last displayed.

TXPK

Network packets transmitted since last displayed.

WRBY

Disk bytes written since last displayed.

WRRQ

Disk write requests since last displayed.

NOTES¶

 libvir: error : Unknown failure
 Fatal error: exception Libvirt.Virterror(...)

 export LIBVIRT_DEBUG=1

SEE ALSO¶

top(1), virsh(1), <http://www.libvirt.org/ocaml/>, <http://www.libvirt.org/>, <http://people.redhat.com/~rjones/>, <http://caml.inria.fr/>

AUTHORS¶

Richard W.M. Jones <rjones @ redhat . com>

COPYRIGHT¶

(C) Copyright 2007-2012 Red Hat Inc., Richard W.M. Jones http://libvirt.org/

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

REPORTING BUGS¶

Bugs can be viewed on the Red Hat Bugzilla page: <https://bugzilla.redhat.com/>.

If you find a bug in virt-top, please follow these steps to report it:

1. Check for existing bug reports

Go to <https://bugzilla.redhat.com/> and search for similar bugs. Someone may already have reported the same bug, and they may even have fixed it.

2. Capture debug and error messages

Run

 virt-top --debug virt-top.log
    

and keep virt-top.log. It contains error messages which you should submit with your bug report.

3. Get version of virt-top and version of libvirt.

Use:

 virt-top --version
    

If you can get the precise version of libvirt you are using then that too is helpful.

4. Submit a bug report.

Go to <https://bugzilla.redhat.com/> and enter a new bug. Please describe the problem in as much detail as possible.

Remember to include the version numbers (step 3) and the debug messages file (step 2).

5. Assign the bug to rjones @ redhat.com

Assign or reassign the bug to rjones @ redhat.com (without the spaces). You can also send me an email with the bug number if you want a faster response.